Harvester ch1 of CKB and HNS, connection tutorial analysis

1 Get the miner ip

Open get ip Press on the machine after the tool ipset Key , Get the machine ip.（ If the miner was fixed IP It needs to be cleared IP, Press... On the machine reset Key , Then press... After the machine restarts ipset obtain ip, Main machine and mining machine ip Within the same network segment ）

 

2 Log in to the miner

The login account and password are ： admin

 

3 Setting up ore pool , The miners （ Wallet address ）

As shown in the figure below , choice ckb Ore pool setting , It will jump to the setting interface ,

1. Miner's command mode , The default is ip, The miner name is the miner name of the machine in the observation link , You can also choose to customize , Or mix it up （ Customize + Native ip).
2. Set the ore pool address ： Set the pool address relative to , Like a fish pond stratum+tcp://ckb.f2pool.com:4300
3. Set miner , Set up the customer's own miner （ Wallet address ）. The setting of the reserve ore pool below is the same as above , You can set different mine pool addresses , If the main ore pool is abnormal , It will automatically switch to the standby ore pool . Be careful ： After setting, you need to click Submit .
4. Hns The ore pool setting and wallet address setting of ckb equally .

 

4 Network settings

1. dhcp（ dynamic ip）： You need to select in network mode DHCP Pattern ,
2. Staticip( static state ip): You need to select in network mode Static static state ip.
3. After setting up Submit