HCIP 交换机实验

一、按图配置VLAN
[sw1]vlan batch 2 to 5
[sw1-GigabitEthernet0/0/2]port link-type trunk
[sw1-GigabitEthernet0/0/2]port trunk a
[sw1-GigabitEthernet0/0/2]port trunk allow-pass vlan 2 3
[sw1-GigabitEthernet0/0/2]int g0/0/1
[sw1-GigabitEthernet0/0/1]port link-type trunk
[sw1-GigabitEthernet0/0/1]port trunk allow-pass vlan 114
[sw1]vlan 114
[sw1]int vlan 114
[sw1-Vlanif114]
[sw1-Vlanif114]ip add 10.1.114.1 24
[sw1]int vlan 3
[sw1-Vlanif3]ip add 10.1.3.254 24
[sw1]int vlan 2
[sw1-Vlanif2]ip add 10.1.2.254 24
[sw1]ip pool vlan2
Info:It’s successful to create an IP address pool.
[sw1-ip-pool-vlan2]network 10.1.2.0 mask 24
[sw1-ip-pool-vlan2]gateway-list 10.1.2.254
[sw1-Vlanif2]dhcp select global
[sw1]int g0/0/4
[sw1-GigabitEthernet0/0/4]port link-type trunk
[sw1-GigabitEthernet0/0/4]port trunk allow-pass vlan 100
[sw1-GigabitEthernet0/0/4]int g0/0/4
[sw1]int vlan 100
[sw1-Vlanif100]ip add 10.1.100.254 24
[sw1-Vlanif11]ip add 10.1.11.2 24
[sw1-GigabitEthernet0/0/5]dis th

interface GigabitEthernet0/0/5
port link-type access
port default vlan 11

[sw2]int g0/0/2
[sw2-GigabitEthernet0/0/2]port link-type access
[sw2-GigabitEthernet0/0/2]port default vlan 2
[sw2-GigabitEthernet0/0/2]int g0/0/3
[sw2-GigabitEthernet0/0/3]port link-type access
[sw2-GigabitEthernet0/0/3]port default vlan 3
[sw2-GigabitEthernet0/0/3]int g0/0/1
[sw2-GigabitEthernet0/0/1]port link-type trunk
[sw2-GigabitEthernet0/0/1]port trunk allow-pass vlan 2 3

[sw3]int g0/0/3
[sw3-GigabitEthernet0/0/3]port link-type access
[sw3-GigabitEthernet0/0/3]port default vlan 2
[sw3]int g0/0/1
[sw3-GigabitEthernet0/0/1]port link-type trunk
[sw3-GigabitEthernet0/0/1]port trunk allow-pass vlan 2

[sw4-GigabitEthernet0/0/2]port link-type trunk
[sw4-GigabitEthernet0/0/2]port trunk allow-pass vlan 4
[sw4-GigabitEthernet0/0/3]port link-type trunk
[sw4-GigabitEthernet0/0/3]port trunk allow-pass vlan 4 5
[sw4-GigabitEthernet0/0/3]int vlan 4
[sw4-Vlanif4]ip add 10.1.4.254 24
[sw4-Vlanif4]int vlan 5
[sw4-Vlanif5]ip address 10.1.5.254 24
[sw4]vlan 200
[sw4]int vlan 200
[sw4-Vlanif200]ip add 10.1.200.254 24
[sw4]dhcp enable
[sw4]int vlan 4
[sw4-Vlanif4]dhcp select interface
[sw4-Vlanif4]int vlan 5
[sw4-Vlanif5]dhcp select interface
[sw4-GigabitEthernet0/0/4]port link-type access
[sw4-GigabitEthernet0/0/4]port default vlan 14
[sw4-Vlanif14]ip add 10.1.14.2 24

[r5]int g0/0/2
[r5-GigabitEthernet0/0/2]port link-type access
[r5-GigabitEthernet0/0/2]port default vlan 4
[r5]int g0/0/1
[r5-GigabitEthernet0/0/1]port link-type trunk
[r5-GigabitEthernet0/0/1]port trunk allow-pass vlan 4

[sw6]int g0/0/2
[sw6-GigabitEthernet0/0/2]port link-type access
[sw6-GigabitEthernet0/0/2]port default vlan 5
[sw6-GigabitEthernet0/0/2]int g0/0/3
[sw6-GigabitEthernet0/0/3]port link-type access
[sw6-GigabitEthernet0/0/3]port default vlan 4
[sw6-GigabitEthernet0/0/3]int g0/0/1
[sw6-GigabitEthernet0/0/1]port link-type trunk
[sw6-GigabitEthernet0/0/1]port trunk allow-pass vlan 4 5

[sw7]int g0/0/3
[sw7-GigabitEthernet0/0/3]port link-type access
[sw7-GigabitEthernet0/0/3]port default vlan 100
[sw7]int g0/0/4
[sw7-GigabitEthernet0/0/4]port link-type access
[sw7-GigabitEthernet0/0/4]port default vlan 200
[sw7-GigabitEthernet0/0/2]dis this

interface GigabitEthernet0/0/2
port link-type trunk
port trunk allow-pass vlan 200

[sw7-GigabitEthernet0/0/1]dis this

interface GigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 100

[r1]ip route-static 0.0.0.0 0 100.1.1.2
[r1]acl 2000
[r1-acl-basic-2000]rule permit source 10.1.0.0 0.0.0.255
[r1-acl-basic-2000]int g0/0/2
[r1-GigabitEthernet0/0/2]nat outbound 2000

二、配置OSPF
[r1]ospf 1 router-id 1.1.1.1
[r1-ospf-1]a 0
[r1-ospf-1-area-0.0.0.0]net 10.1.11.0 0.0.0.255
[r1-ospf-1-area-0.0.0.0]net 10.1.14.0 0.0.0.255
[r1-ospf-1]default-route-advertise

[sw1-ospf-1-area-0.0.0.0]dis th

area 0.0.0.0
network 10.1.11.0 0.0.0.255
network 10.1.114.0 0.0.0.255

return

[sw4-ospf-1-area-0.0.0.0]dis this

area 0.0.0.0
network 10.1.114.0 0.0.0.255
network 10.1.14.0 0.0.0.255

[sw1]ospf 1 r
[sw1]ospf 1 router-id 11.11.11.11
[sw1-ospf-1]a 1
[sw1-ospf-1-area-0.0.0.1]network 10.1.2.0 0.0.0.255
[sw1-ospf-1-area-0.0.0.1]network 10.1.3.0 0.0.0.255
[sw1-ospf-1-area-0.0.0.1]stub no-summary
[sw1-ospf-1-area-0.0.0.1]qu
[sw1-ospf-1]a 3
[sw1-ospf-1-area-0.0.0.3]net 10.1.100.0 0.0.0.255
[sw1-ospf-1-area-0.0.0.3]stub no-summary
[sw1-ospf-1-area-0.0.0.3]
[sw1]ospf 1 r
[sw1]ospf 1 router-id 11.11.11.11
[sw1-ospf-1]a 1
[sw1-ospf-1-area-0.0.0.1]net
[sw1-ospf-1-area-0.0.0.1]network
Jul 15 2021 19:49:22-08:00 sw1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 39, the
change loop count is 0, and the maximum number of records is 4095.10.
[sw1-ospf-1-area-0.0.0.1]network 10.1.2.0 0.0.0.255
[sw1-ospf-1-area-0.0.0.1]
Jul 15 2021 19:49:42-08:00 sw1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 40, the
change loop count is 0, and the maximum number of records is 4095.net
[sw1-ospf-1-area-0.0.0.1]network 10.1.3.0 0.0.0.255
[sw1-ospf-1-area-0.0.0.1]
[sw1-ospf-1-area-0.0.0.1]
[sw1-ospf-1-area-0.0.0.1]
Jul 15 2021 19:50:02-08:00 sw1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 41, the
change loop count is 0, and the maximum number of records is 4095.
[sw1-ospf-1-area-0.0.0.1]stub no
[sw1-ospf-1-area-0.0.0.1]stub no-summary
[sw1-ospf-1-area-0.0.0.1]qu
[sw1-ospf-1]a 3
[sw1-ospf-1-area-0.0.0.3]net 10.1.100.0 0.0.0.255
[sw1-ospf-1-area-0.0.0.3]stub no-summary
三、


vlan100删除后 可以ping通