Introduction to the use of Jerry downloader forced download tool_ Ac695n696nad14ad15 full range support

Catalog

Common questions

The first 1 Step ----- Connect according to the interface USB Transposon

The first 2 Step ----- Plug in the downloader

The first 3 Step ----- Double click batch

V4.0 Introduction to version

The shape of the mandatory tool is as follows

---

• Common questions

problem 1	This tool   Need to install drivers ？
answer	1、 This tool , It's drive free , No drivers need to be installed , No drivers need to be installed

problem 2

This tool   How to use it ？

answer

1、 Female head , Is to connect the computer . First connect to the computer Male head , Is to connect the template to be upgraded . If the interface is inappropriate , You can make your own adapter Under normal circumstances , Blue lights and red lights will always be on . The red light is a power supply light , The blue light is the download indicator When you need to upgrade , Insert the male head into the template to be upgraded , The normal phenomenon is that the blue light will go out , Now you can download

problem 3	Why do I follow the operation , Still can't upgrade the program ？
answer	When you insert the male head into the template to be upgraded Be sure to pay attention to The master control of the template is also Power on at the same time Check the usb The connection of , If there is something wrong . Whether the blue light goes out Sometimes you may need to plug and unplug several times , To upgrade , This is also a normal phenomenon

 

• The first 1 Step ----- Connect according to the interface USB Transposon

     

 

• The first 2 Step ----- Plug in the downloader

 

The first 3 Step ----- Double click batch

  Double click the batch            This means that the download is successful .

• V4.0 Introduction to version

• The shape of the mandatory tool is as follows

1. 

 

1. If the upgraded chip , It is without crystal oscillator -- Such as 608n、ad140n、ac104n Wait for crystal free chips

Then open the shell , Turn the dial switch 2 Call on  , Others hit off. Then press “updata” Key to upgrade

1. If the upgraded chip , It's with crystal oscillator -- Such as ：695x、692x、693x、697x、696x wait

Then open the shell , Turn all the dials to off. Then press “updata” Key to upgrade

4、 If the upgraded chip is AD15N, According to sdk The method given in it is to upgrade , Through serial port

==》 In my spare time , The red light is always on , The green light is always on or flashing 【 Depending on different modes , Dial switch setting 】

==》 Enter the phenomenon after downloading , The green light is off , The red light is always on

==》 At the same time, the subsequent Jerry's chip , You can use 4.0 Download tools for , and 2.0 Our tools are only suitable for chips with crystal oscillators , Chip selection without crystal oscillator 4.0 Tools for