华为设备配置中型网络WLAN基本业务

1. 配置LAW1和AC1，使AP与AC1之间能够传输CAPWAP报文
   [LSW1]vlan batch 10
   [LSW1-GigabitEthernet0/0/1port link-type trunk
   [LSW1-GigabitEthernet0/0/1]port trunk allow-pass vlan 10
   [LSW1-GigabitEthernet0/0/2]port link-type trunk
   [LSW1-GigabitEthernet0/0/2]port trunk allow-pass vlan 10
   [LSW1-GigabitEthernet0/0/2]port trunk pvid vlan 10
   [LSW1-GigabitEthernet0/0/3]port link-type trunk
   [LSW1-GigabitEthernet0/0/3]port trunk pvid vlan 10
   [LSW1-GigabitEthernet0/0/3]port trunk allow-pass vlan 10
   [AC1]vlan batch 10
   [AC1-GigabitEthernet0/0/2]port link-type trunk
   [AC1-GigabitEthernet0/0/2]port trunk allow-pass vlan 10

2. 配置AC1与上层网络设备互通：配置VLANIF11、12（业务VLAN）和VLANIF20
   [AC1]vlan batch 11 12 20
   [AC1]int Vlanif 11
   [AC1-Vlanif11]ip add 10.1.11.1 24
   [AC1-Vlanif11]int Vlanif 12
   [AC1-Vlanif12]ip add 10.1.12.1 24
   [AC1-Vlanif12]int Vlanif 20
   [AC1-Vlanif20]ip add 10.1.2.1 24
   [AC1]ip route-static 0.0.0.0 0.0.0.0 10.1.2.3 //配置AC的缺省路由
   [AC1-GigabitEthernet0/0/1]port link-type access
   [AC1-GigabitEthernet0/0/1]port default vlan 20

3. 配置AC给AP分配IP地址，AR给STA分配IP地址
   [AC1]dhcp enable
   [AC1]int Vlanif 10
   [AC1-Vlanif10]ip add 10.1.1.1 24
   [AC1-Vlanif10]dhcp select interface //配置AC通过接口地址池为AP分配IP地址
   [AC1]int Vlanif 11
   [AC1-Vlanif11]dhcp select relay //AC作为DHCP中继
   [AC1-Vlanif11]dhcp relay server-ip 10.1.2.3 //使能DHCP中继探测用户表项功能
   [AC1-Vlanif11]int Vlanif 12
   [AC1-Vlanif12]dhcp select relay
   [AC1-Vlanif12]dhcp relay server-ip 10.1.2.3
   [AR1]dhcp enable
   [AR1]ip pool sta_pool1
   [AR1-ip-pool-sta_pool1]gateway-list 10.1.11.1
   [AR1-ip-pool-sta_pool1]network 10.1.11.0 mask 24
   [AR1]ip pool sta_pool2
   [AR1-ip-pool-sta_pool2]gateway-list 10.1.12.1
   [AR1-ip-pool-sta_pool2]network 10.1.12.0 mask 24
   [AR1-GigabitEthernet0/0/0]ip add 10.1.2.3 24
   [AR1-GigabitEthernet0/0/0]dhcp select global
   [AR1]ip route-static 10.1.11.0 24 10.1.2.1
   [AR1]ip route-static 10.1.12.0 24 10.1.2.1

4. 配置VLAN pool，用于作为业务VLAN
   [AC1]vlan pool sta_pool
   [AC1-vlan-pool-sta_pool]vlan 11 12
   [AC1-vlan-pool-sta_pool]assignment hash

5. 配置AP上线
   [AC1]wlan
   [AC1-wlan-view]ap-group name ap-g1 //创建AP组
   [AC1-wlan-view]regulatory-domain-profile name domain1 //创建域管理模板
   [AC1-wlan-regulate-domain-domain1]country-code cn //配置AC的国家码
   [AC1-wlan-view]ap-group name ap-g1
   [AC1-wlan-ap-group-ap-g1]regulatory-domain-profile domain1 //在AP组下引用域管理模板
   [AC1]capwap source interface Vlanif 10 //配置AC的源接口
   [AC1]wlan
   [AC1-wlan-view]ap auth-mode mac-auth
   [AC1-wlan-view]ap-id 0 ap-mac 00e0-fc80-2e10
   [AC1-wlan-ap-0]ap-name ap1
   [AC1-wlan-ap-0]ap-group ap-g1
   [AC1-wlan-view]ap-id 1 ap-mac 00e0-fc65-68e0
   [AC1-wlan-ap-1]ap-name ap2
   [AC1-wlan-ap-1]ap-group ap-g1
   

6. 配置WLAN业务参数
   [AC1]wlan
   [AC1-wlan-view]security-profile name wlan-sec //创建安全模板
   [AC1-wlan-sec-prof-wlan-sec]security wpa2 psk pass-phrase [email protected] aes //配置安全策略
   [AC1-wlan-view]ssid-profile name wlan-ssid // 创建SSID模板
   [AC1-wlan-ssid-prof-wlan-ssid]ssid wlan-net //配置SSID名称
   [AC1-wlan-view]vap-profile name wlan-vap //创建VAP模板
   [AC1-wlan-vap-prof-wlan-vap]forward-mode tunnel //配置业务数据转发模式
   [AC1-wlan-vap-prof-wlan-vap]service-vlan vlan-pool sta_pool //配置业务VLAN
   [AC1-wlan-vap-prof-wlan-vap]security-profile wlan-sec //引用安全模板
   [AC1-wlan-vap-prof-wlan-vap]ssid-profile wlan-ssid //引用SSID模板
   [AC1-wlan-view]ap-group name ap-g1
   [AC1-wlan-ap-group-ap-g1]vap-profile wlan-vap wlan 1 radio all //配置AP组引用VAP模板

7. 配置AP射频的信道和功率
   [AC1-wlan-view]ap-id 0
   [AC1-wlan-ap-0]radio 0 //配置AP射频0的信道和功率
   [AC1-wlan-radio-0/0]channel 20mhz 6
   [AC1-wlan-radio-0/0]eirp 127
   [AC1-wlan-radio-0/0]radio 1 //配置AP射频1的信道和功率
   [AC1-wlan-radio-0/1]channel 20mhz 149
   [AC1-wlan-radio-0/1]eirp 127

8. 验证配置