1. use stm32cubemx to establish stm32g030c8t6 project

Hardware environment

STM32G030C8T6 Hardware board

Software environment

• STM32CubeMX
• Keil5
• Jlink Related drive

Configuration work

1. STM32CubeMX New project

choice STM32G0 And click the corresponding subordinate chip , And then click on... In the upper right corner “Start Project”

2. Get into STM32CubeMX The project configures the operating mode of each pin

3. Project Manager Set up

Here you can select the IDE, You can choose Keil4、Keil5 and IAR engineering , It depends on your local installation environment .
After setting, click... In the upper right corner GENERATE CODE

Then you can open the project code

Keil5 IDE

4. Burners J-Link Set up