当前位置:网站首页>Four pin OLED display based on stm32
Four pin OLED display based on stm32
2022-07-29 08:12:00 【Half life fireworks I blurred】
Use stm32f103c8t6 The smallest system of , external OLED, And on the system board PC13 Oral LED The lamp
When PC13 When the light on the mouth is on OLED Show 1, When off, it displays 0.
OLED With four needles IIC drive
SCL The clock signal is connected P8
SDA The data transmission port is connected P9
VVC Pick up 3.3V
GND Pick up GND
The main function
#include "stm32f10x.h" // Device header
#include "Delay.h"
#include "OLED.h"
#include "LED.h"
int main(void)
{
LED_Init();
OLED_Init();
while (1)
{
OLED_ShowNum(2, 1, 1, 1);// The first column of the second row shows numbers 1
LED1_ON();
// GPIO_ResetBits(GPIOC, GPIO_Pin_13);
Delay_ms(1000);
OLED_ShowNum(2, 1, 0, 1);// The first column of the second row shows numbers 0
LED1_OFF();
// GPIO_SetBits(GPIOC, GPIO_Pin_13);
Delay_ms(1000);
}
}
LED initialization
#include "stm32f10x.h" // Device header
void LED_Init(void)
{
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC, ENABLE);// Turn on PC Port clock
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;// Push pull output
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_13; // Can make PC13 mouth
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOC, &GPIO_InitStructure);
}
void LED1_ON(void)
{
GPIO_ResetBits(GPIOC, GPIO_Pin_13);// Operate one IO Set the low-level function of the port
}
void LED1_OFF(void)
{
GPIO_SetBits(GPIOC, GPIO_Pin_13);// Operate one IO Set the high-level function
}
void LED1_Turn(void)// Flip IO mouth
{
if (GPIO_ReadOutputDataBit(GPIOC, GPIO_Pin_13) == 0)
{
GPIO_SetBits(GPIOC, GPIO_Pin_13);
}
else
{
GPIO_ResetBits(GPIOC, GPIO_Pin_13);
}
}
OLED Driver module
#include "stm32f10x.h"
#include "OLED_Font.h"
/* Pin configuration */
#define OLED_W_SCL(x) GPIO_WriteBit(GPIOB, GPIO_Pin_8, (BitAction)(x))
#define OLED_W_SDA(x) GPIO_WriteBit(GPIOB, GPIO_Pin_9, (BitAction)(x))
/* Pin initialization */
void OLED_I2C_Init(void)
{
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);// Turn on PB Port clock
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_OD;// Open drain output
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8;// Can make PB8 and PB9
GPIO_Init(GPIOB, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
GPIO_Init(GPIOB, &GPIO_InitStructure);
OLED_W_SCL(1);
OLED_W_SDA(1);
}
/**
* @brief I2C Start
* @param nothing
* @retval nothing
*/
void OLED_I2C_Start(void)
{
OLED_W_SDA(1);
OLED_W_SCL(1);
OLED_W_SDA(0);
OLED_W_SCL(0);
}
/**
* @brief I2C stop it
* @param nothing
* @retval nothing
*/
void OLED_I2C_Stop(void)
{
OLED_W_SDA(0);
OLED_W_SCL(1);
OLED_W_SDA(1);
}
/**
* @brief I2C Send a byte
* @param Byte One byte to send
* @retval nothing
*/
void OLED_I2C_SendByte(uint8_t Byte)
{
uint8_t i;
for (i = 0; i < 8; i++)
{
OLED_W_SDA(Byte & (0x80 >> i));
OLED_W_SCL(1);
OLED_W_SCL(0);
}
OLED_W_SCL(1); // An extra clock , Do not process the reply signal
OLED_W_SCL(0);
}
/**
* @brief OLED Write orders
* @param Command Command to write
* @retval nothing
*/
void OLED_WriteCommand(uint8_t Command)
{
OLED_I2C_Start();
OLED_I2C_SendByte(0x78); // Slave address
OLED_I2C_SendByte(0x00); // Write orders
OLED_I2C_SendByte(Command);
OLED_I2C_Stop();
}
/**
* @brief OLED Writing data
* @param Data The data to be written
* @retval nothing
*/
void OLED_WriteData(uint8_t Data)
{
OLED_I2C_Start();
OLED_I2C_SendByte(0x78); // Slave address
OLED_I2C_SendByte(0x40); // Writing data
OLED_I2C_SendByte(Data);
OLED_I2C_Stop();
}
/**
* @brief OLED Set cursor position
* @param Y Take the upper left corner as the origin , Coordinates in the downward direction , Range :0~7
* @param X Take the upper left corner as the origin , Coordinates in the right direction , Range :0~127
* @retval nothing
*/
void OLED_SetCursor(uint8_t Y, uint8_t X)
{
OLED_WriteCommand(0xB0 | Y); // Set up Y Location
OLED_WriteCommand(0x10 | ((X & 0xF0) >> 4)); // Set up X The position is low 4 position
OLED_WriteCommand(0x00 | (X & 0x0F)); // Set up X High position 4 position
}
/**
* @brief OLED Clear the screen
* @param nothing
* @retval nothing
*/
void OLED_Clear(void)
{
uint8_t i, j;
for (j = 0; j < 8; j++)
{
OLED_SetCursor(j, 0);
for(i = 0; i < 128; i++)
{
OLED_WriteData(0x00);
}
}
}
/**
* @brief OLED Display a character
* @param Line Row position , Range :1~4
* @param Column Column position , Range :1~16
* @param Char One character to display , Range :ASCII Visible characters
* @retval nothing
*/
void OLED_ShowChar(uint8_t Line, uint8_t Column, char Char)
{
uint8_t i;
OLED_SetCursor((Line - 1) * 2, (Column - 1) * 8); // Set the cursor position in the upper half
for (i = 0; i < 8; i++)
{
OLED_WriteData(OLED_F8x16[Char - ' '][i]); // Show the top half
}
OLED_SetCursor((Line - 1) * 2 + 1, (Column - 1) * 8); // Set the cursor position in the lower half
for (i = 0; i < 8; i++)
{
OLED_WriteData(OLED_F8x16[Char - ' '][i + 8]); // Show the bottom half
}
}
/**
* @brief OLED display string
* @param Line Start line position , Range :1~4
* @param Column Start column position , Range :1~16
* @param String String to display , Range :ASCII Visible characters
* @retval nothing
*/
void OLED_ShowString(uint8_t Line, uint8_t Column, char *String)
{
uint8_t i;
for (i = 0; String[i] != '\0'; i++)
{
OLED_ShowChar(Line, Column + i, String[i]);
}
}
/**
* @brief OLED The power function
* @retval The return value is equal to X Of Y Power
*/
uint32_t OLED_Pow(uint32_t X, uint32_t Y)
{
uint32_t Result = 1;
while (Y--)
{
Result *= X;
}
return Result;
}
/**
* @brief OLED Show numbers ( Decimal system , Positive numbers )
* @param Line Start line position , Range :1~4
* @param Column Start column position , Range :1~16
* @param Number Number to display , Range :0~4294967295
* @param Length The length of the number to display , Range :1~10
* @retval nothing
*/
void OLED_ShowNum(uint8_t Line, uint8_t Column, uint32_t Number, uint8_t Length)
{
uint8_t i;
for (i = 0; i < Length; i++)
{
OLED_ShowChar(Line, Column + i, Number / OLED_Pow(10, Length - i - 1) % 10 + '0');
}
}
/**
* @brief OLED Show numbers ( Decimal system , Signed number )
* @param Line Start line position , Range :1~4
* @param Column Start column position , Range :1~16
* @param Number Number to display , Range :-2147483648~2147483647
* @param Length The length of the number to display , Range :1~10
* @retval nothing
*/
void OLED_ShowSignedNum(uint8_t Line, uint8_t Column, int32_t Number, uint8_t Length)
{
uint8_t i;
uint32_t Number1;
if (Number >= 0)
{
OLED_ShowChar(Line, Column, '+');
Number1 = Number;
}
else
{
OLED_ShowChar(Line, Column, '-');
Number1 = -Number;
}
for (i = 0; i < Length; i++)
{
OLED_ShowChar(Line, Column + i + 1, Number1 / OLED_Pow(10, Length - i - 1) % 10 + '0');
}
}
/**
* @brief OLED Show numbers ( Hexadecimal , Positive numbers )
* @param Line Start line position , Range :1~4
* @param Column Start column position , Range :1~16
* @param Number Number to display , Range :0~0xFFFFFFFF
* @param Length The length of the number to display , Range :1~8
* @retval nothing
*/
void OLED_ShowHexNum(uint8_t Line, uint8_t Column, uint32_t Number, uint8_t Length)
{
uint8_t i, SingleNumber;
for (i = 0; i < Length; i++)
{
SingleNumber = Number / OLED_Pow(16, Length - i - 1) % 16;
if (SingleNumber < 10)
{
OLED_ShowChar(Line, Column + i, SingleNumber + '0');
}
else
{
OLED_ShowChar(Line, Column + i, SingleNumber - 10 + 'A');
}
}
}
/**
* @brief OLED Show numbers ( Binary system , Positive numbers )
* @param Line Start line position , Range :1~4
* @param Column Start column position , Range :1~16
* @param Number Number to display , Range :0~1111 1111 1111 1111
* @param Length The length of the number to display , Range :1~16
* @retval nothing
*/
void OLED_ShowBinNum(uint8_t Line, uint8_t Column, uint32_t Number, uint8_t Length)
{
uint8_t i;
for (i = 0; i < Length; i++)
{
OLED_ShowChar(Line, Column + i, Number / OLED_Pow(2, Length - i - 1) % 2 + '0');
}
}
/**
* @brief OLED initialization
* @param nothing
* @retval nothing
*/
void OLED_Init(void)
{
uint32_t i, j;
for (i = 0; i < 1000; i++) // Power on delay
{
for (j = 0; j < 1000; j++);
}
OLED_I2C_Init(); // Port initialization
OLED_WriteCommand(0xAE); // Turn off display
OLED_WriteCommand(0xD5); // Set the display clock division ratio / Oscillator frequency
OLED_WriteCommand(0x80);
OLED_WriteCommand(0xA8); // Set the multiplexing rate
OLED_WriteCommand(0x3F);
OLED_WriteCommand(0xD3); // Set the display offset
OLED_WriteCommand(0x00);
OLED_WriteCommand(0x40); // Set display start line
OLED_WriteCommand(0xA1); // Set the left and right directions ,0xA1 normal 0xA0 Reverse left and right
OLED_WriteCommand(0xC8); // Set the up and down direction ,0xC8 normal 0xC0 Up and down reversed
OLED_WriteCommand(0xDA); // Set up COM Pin hardware configuration
OLED_WriteCommand(0x12);
OLED_WriteCommand(0x81); // Set the contrast control
OLED_WriteCommand(0xCF);
OLED_WriteCommand(0xD9); // Set precharge cycle
OLED_WriteCommand(0xF1);
OLED_WriteCommand(0xDB); // Set up VCOMH Deselect level
OLED_WriteCommand(0x30);
OLED_WriteCommand(0xA4); // Set the entire display on / close
OLED_WriteCommand(0xA6); // Settings are normal / Reverse display
OLED_WriteCommand(0x8D); // Set the charging pump
OLED_WriteCommand(0x14);
OLED_WriteCommand(0xAF); // Turn on the display
OLED_Clear(); //OLED Clear the screen
}
OLED_Font.h modular
#ifndef __OLED_FONT_H
#define __OLED_FONT_H
/*OLED Font library , wide 8 Pixels , high 16 Pixels */
const uint8_t OLED_F8x16[][16]=
{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 0
0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//! 1
0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//" 2
0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,
0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//# 3
0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,
0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$ 4
0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,
0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//% 5
0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,
0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//& 6
0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//' 7
0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,
0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//( 8
0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,
0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//) 9
0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,
0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//* 10
0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,
0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+ 11
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//, 12
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//- 13
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//. 14
0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,
0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/// 15
0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,
0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0 16
0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,
0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1 17
0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,
0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2 18
0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,
0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3 19
0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,
0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4 20
0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,
0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5 21
0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,
0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6 22
0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,
0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7 23
0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,
0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8 24
0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,
0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9 25
0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,
0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//: 26
0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,
0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//; 27
0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,
0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//< 28
0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,
0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//= 29
0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,
0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//> 30
0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,
0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//? 31
0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,
0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@ 32
0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,
0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A 33
0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,
0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B 34
0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,
0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C 35
0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,
0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D 36
0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,
0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E 37
0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,
0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F 38
0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,
0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G 39
0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,
0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H 40
0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,
0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I 41
0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,
0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J 42
0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,
0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K 43
0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,
0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L 44
0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,
0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M 45
0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,
0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N 46
0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,
0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O 47
0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,
0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P 48
0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,
0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q 49
0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,
0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R 50
0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,
0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S 51
0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,
0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T 52
0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,
0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U 53
0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,
0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V 54
0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,
0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W 55
0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,
0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X 56
0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,
0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y 57
0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,
0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z 58
0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,
0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[ 59
0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\ 60
0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,
0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//] 61
0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 62
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_ 63
0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//` 64
0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,
0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a 65
0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,
0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b 66
0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,
0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c 67
0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,
0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d 68
0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,
0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e 69
0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,
0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f 70
0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,
0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g 71
0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,
0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h 72
0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,
0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i 73
0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,
0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j 74
0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,
0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k 75
0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,
0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l 76
0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,
0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m 77
0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,
0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n 78
0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,
0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o 79
0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,
0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p 80
0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,
0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q 81
0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,
0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r 82
0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,
0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s 83
0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,
0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t 84
0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,
0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u 85
0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,
0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v 86
0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,
0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w 87
0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,
0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x 88
0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,
0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y 89
0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,
0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z 90
0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,
0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{ 91
0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//| 92
0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,
0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//} 93
0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94
};
#endif
Phenomenogram

边栏推荐
- Processes and threads
- Process and concept of process
- Phy6252 is an ultra-low power Bluetooth wireless communication chip for the Internet of things
- [beauty of software engineering - column notes] 29 | automated testing: how to kill bugs in the cradle?
- Privacy is more secure in the era of digital RMB
- Ue4/ue5 C disk enlargement processing
- BiSeNet v2
- Crawl notes
- [beauty of software engineering - column notes] 30 | make good use of source code management tools to make your collaboration more efficient
- Dynamic thresholds buffer management in a shared buffer packet switch paper summary
猜你喜欢

Some thoughts on growing into an architect

Stm8s003 domestic substitute for dp32g003 32-bit microcontroller chip

Simplefoc+platformio stepping on the path of the pit
![[beauty of software engineering - column notes] 22 | how to do a good job in technology selection for the project?](/img/1a/72bfb3fef59c54188a823ead3a5390.png)
[beauty of software engineering - column notes] 22 | how to do a good job in technology selection for the project?
![[robomaster] control RM motor from scratch (2) -can communication principle and electric regulation communication protocol](/img/7c/ba52c7bc11d165892d7390ad8ce298.png)
[robomaster] control RM motor from scratch (2) -can communication principle and electric regulation communication protocol

Unicode私人使用区域(Private Use Areas)
![[beauty of software engineering - column notes]](/img/b9/43db3fdfe1d9f08035668a66da37e2.png)
[beauty of software engineering - column notes] "one question and one answer" issue 3 | 18 common software development problem-solving strategies

BiSeNet v2

Simple calculator wechat applet project source code

SQL 面试碰到的一个问题
随机推荐
(Video + graphic) machine learning introduction series - Chapter 5 machine learning practice
[beauty of software engineering - column notes] 26 | continuous delivery: how to release new versions to the production environment at any time?
Exercise: store department information
Alibaba political commissar system - Chapter III, Alibaba political commissar and cultural docking
Tcp/ip five layer reference model and corresponding typical devices and IPv6
An Optimal Buffer Management Scheme with Dynamic Thresholds论文总结
华为无线设备配置利用WDS技术部署WLAN业务
Unicode私人使用区域(Private Use Areas)
How to connect VMware virtual machine to external network under physical machine win10 system
Phy6252 is an ultra-low power Bluetooth wireless communication chip for the Internet of things
Qt/pyqt window type and window flag
Compare three clock circuit schemes of single chip microcomputer
【学术相关】为什么很多国内学者的AI的论文复现不了?
Unity beginner 1 - character movement control (2D)
Detailed explanation of the find command (the most common operation of operation and maintenance at the end of the article)
Dynamic thresholds buffer management in a shared buffer packet switch paper summary
Convert source package to RPM package
[beauty of software engineering - column notes] 27 | what is the core competitiveness of software engineers? (top)
Taiyuan bus route crawling
Unity multiplayer online framework mirror learning record (I)