Installation and removal of cover for CPU protection on desktop motherboard

Protection on desktop motherboard cpu Installation and removal of the cover

---

• Here, we use Gigabyte B85 Old motherboard ,CPU Models for LGA115X For example .

Why come out such a tutorial to explain , A friend of mine brought it to me 2 A faulty desktop motherboard , They all failed to start up normally after reinstallation , As a result, it was dismantled CPU It was found that all of them were installed CPU Your seat pin is either crooked or broken . This is a serious lesson , If you disassemble the motherboard and keep it as a spare , Be sure to protect the key position of the motherboard .

Generally, the desktop host is installed once , If there is no problem later , Basically, I won't dismantle the machine , Unless you are curious or DIY Magic reform .

Whether it's dismantling or assembling ,CPU Protective covers are installed on the outside , and CPU The radiator is not attached to the outside like that CPU The card seat is stuffed with .( Because I've met , Someone pressed the lid directly onto CPU In the card holder )

There are only wonderful things you can't think of , There is nothing a brain hole can't do .

• CPU Protective cover
  

Disassembly reference

• Put your index finger against your tail , The thumb can be removed by buttoning up from the head end .
  
• Remove the main board after the protective cover is removed
  

It can be installed CPU Then disassemble