How about the actual use effect of common source oscilloscope

In many research enterprises or some colleges , Various display devices are often used , For example, oscillographic display devices are used for a long time . At present, this kind of equipment is of course the common source oscilloscope . Using this kind of oscilloscope can display all kinds of data very well , And it can also support users to set up by themselves. This kind of device has a long service life , Then after using this device , Indeed, the displayed results are more accurate , Then use it at a lower cost . Here is a brief introduction to this kind of oscilloscope .

Common source oscilloscope is a very popular kind of oscilloscope at present , This device can support a larger bandwidth when displaying , Like 350 Megahertz , also 200 Megahertz and 70 Megahertz can be displayed in words . Then the measuring device can also support analog channels for display and can support two to 4 Analog channels , If it is to be displayed on the analog channel , Then it can be equipped with a special probe , With the probe , Then go to the analog channel to detect these frequencies, and you can display them according to the spectrum of the original frequency , There is no bandwidth limitation . This equipment will also be equipped with special probes , Of course, if users feel that this probe can't satisfy themselves , You can also buy other broadband probes by yourself . Then this device can be very sensitive to capture a variety of waveforms when measuring , Now the waveform that can be processed can be as high as 40 Varied , Then the frequency that can be captured can be as high as 50 More than 10000 kinds .

When a common source oscilloscope is actually used, there is not only such a device itself, but also this display device can be connected to other systems , For example, you can connect memory and hard disk , It can also be connected to the computer host and so on , After connecting these systems, these waveforms can be diagnosed or controlled by separately installed system software , Especially when displaying simulated waveforms, this simulation model can be combined with software , Then record or store the simulation model , Then you can further analyze and judge these waveforms on the computer . If it is a digital frequency or digital waveform , You can store directly on this device , You can also export this device for further analysis .