FortiGate firewall quick initialization administrator password

1. Prepare the serial port cable and Secure-CRT Software , The following figure shows the picture of the serial port cable ：USB Interface to RJ45( Crystal head )

2. open Secure-CRT Software , Set the corresponding connection parameters , As follows
console You can right-click My Computer icon , Choose management options , Check our corresponding... In the device manager COM How much is the mouth , My computer here is COM3

port ：COM3
Baud rate ：9600
Data bits ：8
Parity check ：None
Stop bit ：1
Flow control ： Not checked

3. Power up the firewall , adopt Secure-CRT Software we can see the input information of the serial port line . When we are prompted to enter the account password , We will be having 30 Login completed within seconds .
account number ：maintainer
password ：bcpbFG080D3915000357（ This means bcpb+ Equipment serial number ）

4. Pictured above , We can see the prompt after entering the account and password Welcome！ It means that we have successfully logged in , Now we need to change the original admin Modify the account number
config system admin
edit admin
set password admin123   （ There will be admin The password of the account is changed to admin123）
end

5. After the modification is completed, we can log in to the device with a new password for related configuration .