Notes to subject 2

Catalog

Examination content

Get started

Back into the Treasury

Side parking

Curve driving

Turn at right angles

Ramp stop and start

---

Recent exam subject 2 , I hope the following content is useful to you ~ Come on

Examination content

1. Back into the Treasury
2. Turn at right angles
3. Curve driving
4. Side parking
5. Ramp parking and starting

Each student has two chances in each exam . Students who have not been there twice should 10 You can only make an appointment for the exam in days .

In some areas, subject 2 has added parking card collection and narrow road U-turn projects .

Get started

1. Unbelted ： buckle 100 branch .
2. The gear is not in neutral when starting the engine ： buckle 100 branch .
3. Flameout once ： buckle 10 branch .
4. Remember to release the handbrake and then put into gear when you start the exam , Remember to pull the handbrake when getting off .
5. Press the clutch to the bottom and then shift .

Back into the Treasury

1. Don't drive in the order of the prescribed route ： buckle 100 branch .
2. Body outlet ： buckle 100 branch .
3. The library cannot be poured in ： buckle 100 branch .
4. Before reversing , It's useless to touch the two front wheels with the dotted lines on both sides ： buckle 100 branch .
5. The completion time of the project exceeds 210 second ： buckle 100 branch .
6. Stop halfway over 2 second , Every time 5 branch .

Side parking

1. After the vehicle stops entering the warehouse ： Body outlet , buckle 100 branch .
2. When leaving the warehouse, it is not applicable or the steering light is used incorrectly , buckle 10 branch .
3. The completion time of the project exceeds 90 second , buckle 100 branch .
4. Driving , The car body touches the solid line of the storage location , buckle 10 branch / Time .
5. When driving, the wheel touches the lane edge , buckle 10 branch / Time .
6. Stop halfway over 2 second , buckle 5 branch / Time .

Curve driving ：

1. Stop halfway and hold 100 branch .
2. Thread buckle during driving 100 branch .

Turn at right angles ：

1. The wheel is pressed to the solid line buckle 100 branch .
2. Do not use or use the turn signal incorrectly when turning , Do not turn off the turn signal after turning , buckle 10 branch .
3. Stop halfway over 2s, buckle 5 branch / Time （ In most areas, half-way parking is deducted 100 branch ）.

Ramp stop and start

1. After the vehicle stops , The front bumper of the car is useless and fixed on the pile line , And more than 50cm, buckle 100 branch .
2. After the vehicle stops , The front bumper of the car is useless. It is fixed on the pile line , And not more than 50cm, buckle 10 branch .
3. After the vehicle stops , The starting time exceeds 30 second , buckle 100 branch .
4. When starting, the vehicle slips back more than 30cm, buckle 100 branch .
5. After parking , It's not necessary to pull the parking brake firmly , buckle 10 branch .
6. After the vehicle stops , The vehicle body is more than 50cm, buckle 100 branch .
7. After the vehicle stops , The distance between the vehicle body and the road edge line exceeds 30cm, Not more than 50cm, buckle 10 branch .
8. When starting, behind the vehicle .
9. The sliding distance is greater than 10cm, Less than 30cm, buckle 5 Each time .

Pass the grade , Please go back to the center and print the transcript