【sdx62】QCMAP_CLI手动拨号操作说明

adb登录

adb root 
adb shell

启动QCMAP_CLI

/ # QCMAP_CLI
diag:successfully connected to socket 3

Please select an option to test from the items listed below.

1.  MobileAP Configuration
2.  LAN Configuration
3.  NAT/ALG/VPN Configuration
4.  WLAN Configuration
5.  Firewall Configuration
6.  Backhaul Configuration
7.  Tethering Configuration
8.  Media Service Configuration
9.  Generic Software Bridge Configuration
10. V2X Service Configuration
11. Modem Throughput Estimation Configuration
Option >
qcmap_cli_main.cpp 803:qcmap_msgr_qmi_qcmap_ind: user_handle 2 msg_id 65535 ind_buf_len 8.
QCMAP_Server status update on MDM: UP

输入1-->2--->1 

是能MobileAP Enable succeeds.

1

1.  Display Current Config
2.  Enable/Disable mobileap
3.  Get MobileAP status
4.  Get Connected Device info
5.  Enable/Disable/Reset Packet Stats
6.  Get Packet Stats Status
7.  Restore Factory Default Settings(** Will Reboot Device )
8.  Teardown/Disable and Exit
9.  Set Data Path Optimization Flag
10. Get Data Path Optimization Flag
11. Set Device Mode
12. Get Device Mode
13. Set Client Configuration
14. Set N79 config
15. Get N79 config
16. Register for indications with indication mask
17. Set Feature Mode
18. Get Feature Mode
19. Reset Feature Mode
20. Set Client Preference (Profile handle, Subs_Id, etc)
21. Get Client Preference (Profile handle, Subs_Id, etc)
22. Unregister for indications with indication mask
2
   Please input MobileAP State(1-Enable/0-Disable) : 1

qcmap_cli_main.cpp 803:qcmap_msgr_qmi_qcmap_ind: user_handle 2 msg_id 254 ind_buf_len 14.

qcmap_cli_main.cpp 1952:Subs_id for MODEM_SERVICE_STATUS_IND: 1

qcmap_cli_main.cpp 1958:Received MODEM_SERVICE_STATUS_IND: UP

MobileAP Enable succeeds.

输入6--->2---->1---->1---->3

3表示使用IPv4 IPv6同时拨号

Please select an option to test from the items listed below.

1.  MobileAP Configuration
2.  LAN Configuration
3.  NAT/ALG/VPN Configuration
4.  WLAN Configuration
5.  Firewall Configuration
6.  Backhaul Configuration
7.  Tethering Configuration
8.  Media Service Configuration
9.  Generic Software Bridge Configuration
10. V2X Service Configuration
11. Modem Throughput Estimation Configuration
Option >
qcmap_cli_main.cpp 803:qcmap_msgr_qmi_qcmap_ind: user_handle 2 msg_id 241 ind_buf_len 7.
Received MODEM_STATUS_IND: UP
6
1. Backhaul Common
2. Backhaul WWAN
2
1.  Connect/Disconnect Backhaul
2.  Get WWAN status
3.  Get WWAN Statistics
4.  Reset WWAN Statistics
5.  Set Webserver WWAN access flag
6.  Get Webserver WWAN access flag
7.  Set WWAN Profile
8.  Get WWAN Profile
9.  Set Prefix Delegation Config
10. Get Prefix Delegation Config
11. Get Prefix Delegation Status
12. Enable/Disable TinyProxy
13. Get TinyProxy Status
14. Set IP Passthrough Config
15. Get IP Passthrough Config
16. Get IP Passthrough State
17. Set Autoconnect Config
18. Get Autoconnect Config
19. Set Roaming
20. Get Roaming
21. Enable/Disable DDNS
22. Set DDNS Config
23. Get DDNS Config
24. Switch WWAN Profile
25. Create WWAN Profile
26. Update WWAN Profile
27. Delete WWAN Profile
28. Add/Delete PDN to VLAN Mapping
29. Get All PDN to VLAN Mappings
30. Set PMIP mode
31. Get PMIP mode
32. Get WWAN Roaming status
33. Get Current Profile Handle
34. Eth over GRE Tunnel Config
35. Set IP Passthrough S/W Path Filter
36. Get IP Passthrough S/W Path Filter
37. Set DHCPv6 DNS proxy config
38. Get DHCPv6 DNS proxy state
1
   Please input Backhaul State(1-Connect/0-Disconnect) : 1

   Please input Call Type (1-IPV4; 2-IPV6; 3-IPV4V6) : 3

ConnectBackHaul succeeds.
Please select an option to test from the items listed below.

1.  MobileAP Configuration
2.  LAN Configuration
3.  NAT/ALG/VPN Configuration
4.  WLAN Configuration
5.  Firewall Configuration
6.  Backhaul Configuration
7.  Tethering Configuration
8.  Media Service Configuration
9.  Generic Software Bridge Configuration
10. V2X Service Configuration
11. Modem Throughput Estimation Configuration
Option >
qcmap_cli_main.cpp 803:qcmap_msgr_qmi_qcmap_ind: user_handle 2 msg_id 198 ind_buf_len 18.

qcmap_cli_main.cpp 1642:qcmap_msgr_qmi_qcmap_ind: IPV4 WWAN Backhaul connected...
qcmap_cli_main.cpp 803:qcmap_msgr_qmi_qcmap_ind: user_handle 2 msg_id 34 ind_buf_len 107.

qcmap_cli_main.cpp 886:qcmap_msgr_qmi_qcmap_ind: PDN=1 (Subs_Id=0) IPV4 WWAN Connected
   Interface Name                 : rmnet_data1
   Public IPv4 Address            : 10.0.91.239
   Primary DNS IPv4 Address       : 120.80.80.80
   Seccondary DNS IPv4 Address    : 221.5.88.88
   Public IPv6 Address            : ::
   Gateway IPv6 Address           : ::
   Primary DNS IPv6 Address       : ::
   Seccondary DNS IPv6 Address    : ::


qcmap_cli_main.cpp 803:qcmap_msgr_qmi_qcmap_ind: user_handle 2 msg_id 36 ind_buf_len 107.

qcmap_cli_main.cpp 1040:qcmap_msgr_qmi_qcmap_ind: PDN=1 (Subs_Id=0) IPv4 WWAN Connected...
qcmap_cli_main.cpp 803:qcmap_msgr_qmi_qcmap_ind: user_handle 2 msg_id 198 ind_buf_len 18.

qcmap_cli_main.cpp 1642:qcmap_msgr_qmi_qcmap_ind: IPV6 WWAN Backhaul connected...
qcmap_cli_main.cpp 803:qcmap_msgr_qmi_qcmap_ind: user_handle 2 msg_id 34 ind_buf_len 107.

qcmap_cli_main.cpp 907:qcmap_msgr_qmi_qcmap_ind: PDN=1 (Subs_Id=0)  IPV6 WWAN Connected
   Interface Name                 : rmnet_data1
   Public IPv4 Address            : 0.0.0.0
   Primary DNS IPv4 Address       : 0.0.0.0
   Seccondary DNS IPv4 Address    : 0.0.0.0
   Public IPv6 Address            : 2408:8459:3030:7ee5:b50e:eb35:b38a:e573
   Gateway IPv6 Address           : 2408:8888:0:8888::8
   Primary DNS IPv6 Address       : 2408:8888:0:8888::8
   Seccondary DNS IPv6 Address    : 2408:8899:0:8899::8


qcmap_cli_main.cpp 803:qcmap_msgr_qmi_qcmap_ind: user_handle 2 msg_id 36 ind_buf_len 107.

qcmap_cli_main.cpp 1073:qcmap_msgr_qmi_qcmap_ind: PDN=1 (Subs_Id=0) IPV6 WWAN Connected...

注意

     拨号成功会显示获取的IP地址