当前位置：网站首页>Programming Examples Using IBV Verbs
Programming Examples Using IBV Verbs
2022-06-10 01:58:00 【raindayinrain】
This chapter provides code examples using the IBV Verbs
7.1.Synopsis for RDMA_RC Example Using IBV Verbs
The following is a synopsis of the functions in the programming example, in the order that they are called.
7.1.1 Main
Parse command line. The user may set the TCP port, device name, and device port for the test. If set, these values will override default values in config. The last parameter is the server name. If the server name is set, this designates a server to connect to and therefore puts the program into client mode. Otherwise the program is in server mode.
Call print_config.
Call resources_init.
Call resources_create.
Call connect_qp.
If in server mode, do a call post_send with IBV_WR_SEND operation.
Call poll_completion. Note that the server side expects a completion from the SEND request and the client side expects a RECEIVE completion.
If in client mode, show the message we received via the RECEIVE operation, otherwise, if we are in server mode, load the buffer with a new message.
Sync client<->server.
At this point the server goes directly to the next sync. All RDMA operations are done strictly by the client.
***Client only ***
Call post_send with IBV_WR_RDMA_READ to perform a RDMA read of server’s buffer.
Call poll_completion.
Show server’s message.
Setup send buffer with new message.
Call post_send with IBV_WR_RDMA_WRITE to perform a RDMA write of server’s buffer.
Call poll_completion.
*** End client only operations ***
Sync client<->server.
If server mode, show buffer, proving RDMA write worked.
Call resources_destroy.
Free device name string.
Done.
7.1.2 print_config
Print out configuration information.
7.1.3 resources_init
Clears resources struct.
7.1.4 resources_create
Call sock_connect to connect a TCP socket to the peer.
Get the list of devices, locate the one we want, and open it.
Free the device list.
Get the port information.
Create a PD.
Create a CQ.
Allocate a buffer, initialize it, register it.
Create a QP.
7.1.5 sock_connect
If client, resolve DNS address of server and initiate a connection to it.
If server, listen for incoming connection on indicated port.
7.1.6 connect_qp
Call modify_qp_to_init.
Call post_receive.
Call sock_sync_data to exchange information between server and client.
Call modify_qp_to_rtr.
Call modify_qp_to_rts.
Call sock_sync_data to synchronize client<->server
7.1.7 modify_qp_to_init
Transition QP to INIT state
7.1.8 post_receive
Prepare a scatter/gather entry for the receive buffer.
Prepare an RR.
Post the RR.
7.1.9 sock_sync_data
Using the TCP socket created with sock_connect, synchronize the given set of data between client and the server. Since this function is blocking, it is also called with dummy data to synchronize the timing of the client and server.
7.1.10 modify_qp_to_rtr
Transition QP to RTR state.
7.1.11 modify_qp_to_rts
Transition QP to RTS state.
7.1.12 post_send
Prepare a scatter/gather entry for data to be sent (or received in RDMA read case).
Create an SR. Note that IBV_SEND_SIGNALED is redundant.
If this is an RDMA operation, set the address and key.
Post the SR.
7.1.13 poll_completion
Poll CQ until an entry is found or MAX_POLL_CQ_TIMEOUT milliseconds are reached.
7.1.14 resources_destroy
Release/free/deallocate all items in resource struct.
7.2 Code for Send, Receive, RDMA Read, RDMA Write
/*
* BUILD COMMAND:
* gcc -Wall -I/usr/local/ofed/include -O2 -o RDMA_RC_example -L/usr/local/ofed/lib64 \
* -L/usr/local/ofed/lib -libverbs RDMA_RC_example.c
*
*/
/******************************************************************************
*
* RDMA Aware Networks Programming Example
*
* This code demonstrates how to perform the following operations using the * VPI Verbs API:
*
* Send
* Receive
* RDMA Read
* RDMA Write
*
*****************************************************************************/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <stdint.h>
#include <inttypes.h>
#include <endian.h>
#include <byteswap.h>
#include <getopt.h>
#include <sys/time.h>
#include <arpa/inet.h>
#include <infiniband/verbs.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netdb.h>
/* poll CQ timeout in millisec (2 seconds) */
#define MAX_POLL_CQ_TIMEOUT 2000
#define MSG "SEND operation "
#define RDMAMSGR "RDMA read operation "
#define RDMAMSGW "RDMA write operation"
#define MSG_SIZE (strlen(MSG) + 1)
#if __BYTE_ORDER == __LITTLE_ENDIAN
static inline uint64_t htonll(uint64_t x) { return bswap_64(x); }
static inline uint64_t ntohll(uint64_t x) { return bswap_64(x); }
#elif __BYTE_ORDER == __BIG_ENDIAN
static inline uint64_t htonll(uint64_t x) { return x; }
static inline uint64_t ntohll(uint64_t x) { return x; }
#else
#error __BYTE_ORDER is neither __LITTLE_ENDIAN nor __BIG_ENDIAN
#endif
/* structure of test parameters */
struct config_t
{
const char *dev_name; /* IB device name */
char *server_name; /* server host name */
u_int32_t tcp_port; /* server TCP port */
int ib_port; /* local IB port to work with */
int gid_idx; /* gid index to use */
};
/* structure to exchange data which is needed to connect the QPs */
struct cm_con_data_t
{
uint64_t addr; /* Buffer address */
uint32_t rkey; /* Remote key */
uint32_t qp_num; /* QP number */
uint16_t lid; /* LID of the IB port */
uint8_t gid[16]; /* gid */
} __attribute__ ((packed));
/* structure of system resources */
struct resources
{
struct ibv_device_attr
device_attr;
/* Device attributes */
struct ibv_port_attr port_attr; /* IB port attributes */
struct cm_con_data_t remote_props; /* values to connect to remote side */
struct ibv_context *ib_ctx; /* device handle */
struct ibv_pd *pd; /* PD handle */
struct ibv_cq *cq; /* CQ handle */
struct ibv_qp *qp; /* QP handle */
struct ibv_mr *mr; /* MR handle for buf */
char *buf; /* memory buffer pointer, used for RDMA and send ops */
int sock; /* TCP socket file descriptor */
};
struct config_t config =
{
NULL, /* dev_name */
NULL, /* server_name */
19875, /* tcp_port */
1, /* ib_port */
-1 /* gid_idx */
};
/******************************************************************************
Socket operations
For simplicity, the example program uses TCP sockets to exchange control
information. If a TCP/IP stack/connection is not available, connection manager
(CM) may be used to pass this information. Use of CM is beyond the scope of
this example
******************************************************************************/
/******************************************************************************
* Function: sock_connect
*
* Input
* servername URL of server to connect to (NULL for server mode)
* port port of service
*
* Output
* none
*
* Returns
* socket (fd) on success, negative error code on failure
*
* Description
* Connect a socket. If servername is specified a client connection will be
* initiated to the indicated server and port. Otherwise listen on the
* indicated port for an incoming connection.
*
******************************************************************************/
static int sock_connect(const char *servername, int port)
{
struct addrinfo *resolved_addr = NULL;
struct addrinfo *iterator;
char service[6];
int sockfd = -1;
int listenfd = 0;
int tmp;
struct addrinfo hints =
{
.ai_flags = AI_PASSIVE,
.ai_family = AF_INET,
.ai_socktype = SOCK_STREAM
};
if (sprintf(service, "%d", port) < 0)
goto sock_connect_exit;
/* Resolve DNS address, use sockfd as temp storage */
sockfd = getaddrinfo(servername, service, &hints, &resolved_addr);
if (sockfd < 0)
{
fprintf(stderr, "%s for %s:%d\n", gai_strerror(sockfd), servername, port);
goto sock_connect_exit;
}
/* Search through results and find the one we want */
for (iterator = resolved_addr; iterator ; iterator = iterator->ai_next)
{
sockfd = socket(iterator->ai_family, iterator->ai_socktype, iterator->ai_protocol);
if (sockfd >= 0)
{
if (servername)
/* Client mode. Initiate connection to remote */
if((tmp=connect(sockfd, iterator->ai_addr, iterator->ai_addrlen)))
{
fprintf(stdout, "failed connect \n");
close(sockfd);
sockfd = -1;
}
else
{
/* Server mode. Set up listening socket an accept a connection */
listenfd = sockfd;
sockfd = -1;
if(bind(listenfd, iterator->ai_addr, iterator->ai_addrlen))
goto sock_connect_exit;
listen(listenfd, 1);
sockfd = accept(listenfd, NULL, 0);
}
}
}
sock_connect_exit:
if(listenfd)
close(listenfd);
if(resolved_addr)
freeaddrinfo(resolved_addr);
if (sockfd < 0)
{
if(servername)
fprintf(stderr, "Couldn't connect to %s:%d\n", servername, port);
else
{
perror("server accept");
fprintf(stderr, "accept() failed\n");
}
}
return sockfd;
}
/******************************************************************************
* Function: sock_sync_data
*
* Input
* sock socket to transfer data on
* xfer_size size of data to transfer
* local_data pointer to data to be sent to remote
*
* Output
* remote_data pointer to buffer to receive remote data
*
* Returns
* 0 on success, negative error code on failure
*
* Description
* Sync data across a socket. The indicated local data will be sent to the
* remote. It will then wait for the remote to send its data back. It is
* assumed that the two sides are in sync and call this function in the proper
* order. Chaos will ensue if they are not. :)
*
* Also note this is a blocking function and will wait for the full data to be
* received from the remote.
*
******************************************************************************/
int sock_sync_data(int sock, int xfer_size, char *local_data, char *remote_data)
{
int rc;
int read_bytes = 0;
int total_read_bytes = 0;
rc = write(sock, local_data, xfer_size);
if(rc < xfer_size)
fprintf(stderr, "Failed writing data during sock_sync_data\n");
else
rc = 0;
while(!rc && total_read_bytes < xfer_size)
{
read_bytes = read(sock, remote_data, xfer_size);
if(read_bytes > 0)
total_read_bytes += read_bytes;
else
rc = read_bytes;
}
return rc;
}
/******************************************************************************
End of socket operations
******************************************************************************/
/* poll_completion */
/******************************************************************************
* Function: poll_completion
*
* Input
* res pointer to resources structure
*
* Output
* none
*
* Returns
* 0 on success, 1 on failure
*
* Description
* Poll the completion queue for a single event. This function will continue to
* poll the queue until MAX_POLL_CQ_TIMEOUT milliseconds have passed.
*
******************************************************************************/
static int poll_completion(struct resources *res)
{
struct ibv_wc wc;
unsigned long start_time_msec;
unsigned long cur_time_msec;
struct timeval cur_time;
int poll_result;
int rc = 0;
/* poll the completion for a while before giving up of doing it .. */
gettimeofday(&cur_time, NULL);
start_time_msec = (cur_time.tv_sec * 1000) + (cur_time.tv_usec / 1000);
do
{
poll_result = ibv_poll_cq(res->cq, 1, &wc);
gettimeofday(&cur_time, NULL);
cur_time_msec = (cur_time.tv_sec * 1000) + (cur_time.tv_usec / 1000);
} while ((poll_result == 0) && ((cur_time_msec - start_time_msec) < MAX_POLL_CQ_TIMEOUT));
if(poll_result < 0)
{
/* poll CQ failed */
fprintf(stderr, "poll CQ failed\n");
rc = 1;
}
else if (poll_result == 0)
{
/* the CQ is empty */
fprintf(stderr, "completion wasn't found in the CQ after timeout\n");
rc = 1;
}
else
{
/* CQE found */
fprintf(stdout, "completion was found in CQ with status 0x%x\n", wc.status);
/* check the completion status (here we don't care about the completion opcode */
if (wc.status != IBV_WC_SUCCESS)
{
fprintf(stderr, "got bad completion with status: 0x%x, vendor syndrome: 0x%x\n", wc.status,
wc.vendor_err);
rc = 1;
}
}
return rc;
}
/******************************************************************************
* Function: post_send
*
* Input
* res pointer to resources structure
* opcode IBV_WR_SEND, IBV_WR_RDMA_READ or IBV_WR_RDMA_WRITE
*
* Output
* none
*
* Returns
* 0 on success, error code on failure
*
* Description
* This function will create and post a send work request
******************************************************************************/
static int post_send(struct resources *res, int opcode)
{
struct ibv_send_wr sr;
struct ibv_sge sge;
struct ibv_send_wr *bad_wr = NULL;
int rc;
/* prepare the scatter/gather entry */
memset(&sge, 0, sizeof(sge));
sge.addr = (uintptr_t)res->buf;
sge.length = MSG_SIZE;
sge.lkey = res->mr->lkey;
/* prepare the send work request */
memset(&sr, 0, sizeof(sr));
sr.next = NULL;
sr.wr_id = 0;
sr.sg_list = &sge;
sr.num_sge = 1;
sr.opcode = opcode;
sr.send_flags = IBV_SEND_SIGNALED;
if(opcode != IBV_WR_SEND)
{
sr.wr.rdma.remote_addr = res->remote_props.addr;
sr.wr.rdma.rkey = res->remote_props.rkey;
}
/* there is a Receive Request in the responder side, so we won't get any into RNR flow */
rc = ibv_post_send(res->qp, &sr, &bad_wr);
if (rc)
fprintf(stderr, "failed to post SR\n");
else
{
switch(opcode)
{
case IBV_WR_SEND:
fprintf(stdout, "Send Request was posted\n");
break;
case IBV_WR_RDMA_READ:
fprintf(stdout, "RDMA Read Request was posted\n");
break;
case IBV_WR_RDMA_WRITE:
fprintf(stdout, "RDMA Write Request was posted\n");
break;
default:
fprintf(stdout, "Unknown Request was posted\n");
break;
}
}
return rc;
}
/******************************************************************************
* Function: post_receive
*
* Input
* res pointer to resources structure
*
* Output
* none
*
* Returns
* 0 on success, error code on failure
*
* Description
*
******************************************************************************/
static int post_receive(struct resources *res)
{
struct ibv_recv_wr rr;
struct ibv_sge sge;
struct ibv_recv_wr *bad_wr;
int rc;
/* prepare the scatter/gather entry */
memset(&sge, 0, sizeof(sge));
sge.addr = (uintptr_t)res->buf;
sge.length = MSG_SIZE;
sge.lkey = res->mr->lkey;
/* prepare the receive work request */
memset(&rr, 0, sizeof(rr));
rr.next = NULL;
rr.wr_id = 0;
rr.sg_list = &sge;
rr.num_sge = 1;
/* post the Receive Request to the RQ */
rc = ibv_post_recv(res->qp, &rr, &bad_wr);
if (rc)
fprintf(stderr, "failed to post RR\n");
else
fprintf(stdout, "Receive Request was posted\n");
return rc;
}
/******************************************************************************
* Function: resources_init
*
* Input
* res pointer to resources structure
*
* Output
* res is initialized
*
* Returns
* none
*
* Description
* res is initialized to default values
******************************************************************************/
static void resources_init(struct resources *res)
{
memset(res, 0, sizeof *res);
res->sock = -1;
}
/******************************************************************************
* Function: resources_create
*
* Input
* res pointer to resources structure to be filled in
*
* Output
* res filled in with resources
*
* Returns
* 0 on success, 1 on failure
*
* Description
*
* This function creates and allocates all necessary system resources. These
* are stored in res.
*****************************************************************************/
static int resources_create(struct resources *res)
{
struct ibv_device **dev_list = NULL;
struct ibv_qp_init_attr qp_init_attr;
struct ibv_device *ib_dev = NULL;
size_t size;
int i;
int mr_flags = 0;
int cq_size = 0;
int num_devices;
int rc = 0;
/* if client side */
if (config.server_name)
{
res->sock = sock_connect(config.server_name, config.tcp_port);
if (res->sock < 0)
{
fprintf(stderr, "failed to establish TCP connection to server %s, port %d\n",
config.server_name, config.tcp_port);
rc = -1;
goto resources_create_exit;
}
}
else
{
fprintf(stdout, "waiting on port %d for TCP connection\n", config.tcp_port);
res->sock = sock_connect(NULL, config.tcp_port);
if (res->sock < 0)
{
fprintf(stderr, "failed to establish TCP connection with client on port %d\n", config.tcp_port);
rc = -1;
goto resources_create_exit;
}
}
fprintf(stdout, "TCP connection was established\n");
fprintf(stdout, "searching for IB devices in host\n");
/* get device names in the system */
dev_list = ibv_get_device_list(&num_devices);
if (!dev_list)
{
fprintf(stderr, "failed to get IB devices list\n");
rc = 1;
goto resources_create_exit;
}
/* if there isn't any IB device in host */
if (!num_devices)
{
fprintf(stderr, "found %d device(s)\n", num_devices);
rc = 1;
goto resources_create_exit;
}
fprintf(stdout, "found %d device(s)\n", num_devices);
/* search for the specific device we want to work with */
for (i = 0; i < num_devices; i ++)
{
if(!config.dev_name)
{
config.dev_name = strdup(ibv_get_device_name(dev_list[i]));
fprintf(stdout, "device not specified, using first one found: %s\n",
config.dev_name);
}
if (!strcmp(ibv_get_device_name(dev_list[i]), config.dev_name))
{
ib_dev = dev_list[i];
break;
}
}
/* if the device wasn't found in host */
if (!ib_dev)
{
fprintf(stderr, "IB device %s wasn't found\n", config.dev_name);
rc = 1;
goto resources_create_exit;
}
/* get device handle */
res->ib_ctx = ibv_open_device(ib_dev);
if (!res->ib_ctx)
{
fprintf(stderr, "failed to open device %s\n", config.dev_name);
rc = 1;
goto resources_create_exit;
}
/* We are now done with device list, free it */
ibv_free_device_list(dev_list);
dev_list = NULL;
ib_dev = NULL;
/* query port properties */
if (ibv_query_port(res->ib_ctx, config.ib_port, &res->port_attr))
{
fprintf(stderr, "ibv_query_port on port %u failed\n", config.ib_port);
rc = 1;
goto resources_create_exit;
}
/* allocate Protection Domain */
res->pd = ibv_alloc_pd(res->ib_ctx);
if (!res->pd)
{
fprintf(stderr, "ibv_alloc_pd failed\n");
rc = 1;
goto resources_create_exit;
}
/* each side will send only one WR, so Completion Queue with 1 entry is enough */
cq_size = 1;
res->cq = ibv_create_cq(res->ib_ctx, cq_size, NULL, NULL, 0);
if (!res->cq)
{
fprintf(stderr, "failed to create CQ with %u entries\n", cq_size);
rc = 1;
goto resources_create_exit;
}
/* allocate the memory buffer that will hold the data */
size = MSG_SIZE;
res->buf = (char *) malloc(size);
if (!res->buf )
{
fprintf(stderr, "failed to malloc %Zu bytes to memory buffer\n", size);
rc = 1;
goto resources_create_exit;
}
memset(res->buf, 0 , size);
/* only in the server side put the message in the memory buffer */
if (!config.server_name)
{
strcpy(res->buf, MSG);
fprintf(stdout, "going to send the message: '%s'\n", res->buf);
}
else
memset(res->buf, 0, size);
/* register the memory buffer */
mr_flags = IBV_ACCESS_LOCAL_WRITE | IBV_ACCESS_REMOTE_READ | IBV_ACCESS_REMOTE_WRITE ;
res->mr = ibv_reg_mr(res->pd, res->buf, size, mr_flags);
if (!res->mr)
{
fprintf(stderr, "ibv_reg_mr failed with mr_flags=0x%x\n", mr_flags);
rc = 1;
goto resources_create_exit;
}
fprintf(stdout, "MR was registered with addr=%p, lkey=0x%x, rkey=0x%x, flags=0x%x\n",
res->buf, res->mr->lkey, res->mr->rkey, mr_flags);
/* create the Queue Pair */
memset(&qp_init_attr, 0, sizeof(qp_init_attr));
qp_init_attr.qp_type = IBV_QPT_RC;
qp_init_attr.sq_sig_all = 1;
qp_init_attr.send_cq = res->cq;
qp_init_attr.recv_cq = res->cq;
qp_init_attr.cap.max_send_wr = 1;
qp_init_attr.cap.max_recv_wr = 1;
qp_init_attr.cap.max_send_sge = 1;
qp_init_attr.cap.max_recv_sge = 1;
res->qp = ibv_create_qp(res->pd, &qp_init_attr);
if (!res->qp)
{
fprintf(stderr, "failed to create QP\n");
rc = 1;
goto resources_create_exit;
}
fprintf(stdout, "QP was created, QP number=0x%x\n", res->qp->qp_num);
resources_create_exit:
if(rc)
{
/* Error encountered, cleanup */
if(res->qp)
{
ibv_destroy_qp(res->qp);
res->qp = NULL;
}
if(res->mr)
{
ibv_dereg_mr(res->mr);
res->mr = NULL;
}
if(res->buf)
{
free(res->buf);
res->buf = NULL;
}
if(res->cq)
{
ibv_destroy_cq(res->cq);
res->cq = NULL;
}
if(res->pd)
{
ibv_dealloc_pd(res->pd);
res->pd = NULL;
}
if(res->ib_ctx)
{
ibv_close_device(res->ib_ctx);
res->ib_ctx = NULL;
}
if(dev_list)
{
ibv_free_device_list(dev_list);
dev_list = NULL;
}
if (res->sock >= 0)
{
if (close(res->sock))
fprintf(stderr, "failed to close socket\n");
res->sock = -1;
}
}
return rc;
}
/******************************************************************************
* Function: modify_qp_to_init
*
* Input
* qp QP to transition
*
* Output
* none
*
* Returns
* 0 on success, ibv_modify_qp failure code on failure
*
* Description
* Transition a QP from the RESET to INIT state
******************************************************************************/
static int modify_qp_to_init(struct ibv_qp *qp)
{
struct ibv_qp_attr attr;
int flags;
int rc;
memset(&attr, 0, sizeof(attr));
attr.qp_state = IBV_QPS_INIT;
attr.port_num = config.ib_port;
attr.pkey_index = 0;
attr.qp_access_flags = IBV_ACCESS_LOCAL_WRITE | IBV_ACCESS_REMOTE_READ | IBV_ACCESS_REMOTE_WRITE;
flags = IBV_QP_STATE | IBV_QP_PKEY_INDEX | IBV_QP_PORT | IBV_QP_ACCESS_FLAGS;
rc = ibv_modify_qp(qp, &attr, flags);
if (rc)
fprintf(stderr, "failed to modify QP state to INIT\n");
return rc;
}
/******************************************************************************
* Function: modify_qp_to_rtr
*
* Input
* qp QP to transition
* remote_qpn remote QP number
* dlid destination LID
* dgid destination GID (mandatory for RoCEE)
*
* Output
* none
*
* Returns
* 0 on success, ibv_modify_qp failure code on failure
*
* Description
* Transition a QP from the INIT to RTR state, using the specified QP number
******************************************************************************/
static int modify_qp_to_rtr(struct ibv_qp *qp, uint32_t remote_qpn, uint16_t dlid, uint8_t *dgid)
{
struct ibv_qp_attr attr;
int flags;
int rc;
memset(&attr, 0, sizeof(attr));
attr.qp_state = IBV_QPS_RTR;
attr.path_mtu = IBV_MTU_256;
attr.dest_qp_num = remote_qpn;
attr.rq_psn = 0;
attr.max_dest_rd_atomic = 1;
attr.min_rnr_timer = 0x12;
attr.ah_attr.is_global = 0;
attr.ah_attr.dlid = dlid;
attr.ah_attr.sl = 0;
attr.ah_attr.src_path_bits = 0;
attr.ah_attr.port_num = config.ib_port;
if (config.gid_idx >= 0)
{
attr.ah_attr.is_global = 1;
attr.ah_attr.port_num = 1;
memcpy(&attr.ah_attr.grh.dgid, dgid, 16);
attr.ah_attr.grh.flow_label = 0;
attr.ah_attr.grh.hop_limit = 1;
attr.ah_attr.grh.sgid_index = config.gid_idx;
attr.ah_attr.grh.traffic_class = 0;
}
flags = IBV_QP_STATE | IBV_QP_AV | IBV_QP_PATH_MTU | IBV_QP_DEST_QPN |
IBV_QP_RQ_PSN | IBV_QP_MAX_DEST_RD_ATOMIC | IBV_QP_MIN_RNR_TIMER;
rc = ibv_modify_qp(qp, &attr, flags);
if (rc)
fprintf(stderr, "failed to modify QP state to RTR\n");
return rc;
}
/******************************************************************************
* Function: modify_qp_to_rts
*
* Input
* qp QP to transition
*
* Output
* none
*
* Returns
* 0 on success, ibv_modify_qp failure code on failure
*
* Description
* Transition a QP from the RTR to RTS state
******************************************************************************/
static int modify_qp_to_rts(struct ibv_qp *qp)
{
struct ibv_qp_attr attr;
int flags;
int rc;
memset(&attr, 0, sizeof(attr));
attr.qp_state = IBV_QPS_RTS;
attr.timeout = 0x12;
attr.retry_cnt = 6;
attr.rnr_retry = 0;
attr.sq_psn = 0;
attr.max_rd_atomic = 1;
flags = IBV_QP_STATE | IBV_QP_TIMEOUT | IBV_QP_RETRY_CNT |
IBV_QP_RNR_RETRY | IBV_QP_SQ_PSN | IBV_QP_MAX_QP_RD_ATOMIC
rc = ibv_modify_qp(qp, &attr, flags);
if (rc)
fprintf(stderr, "failed to modify QP state to RTS\n");
return rc;
}
/******************************************************************************
* Function: connect_qp
*
* Input
* res pointer to resources structure
*
* Output
* none
*
* Returns
* 0 on success, error code on failure
*
* Description
* Connect the QP. Transition the server side to RTR, sender side to RTS
******************************************************************************/
static int connect_qp(struct resources *res)
{
struct cm_con_data_t local_con_data;
struct cm_con_data_t remote_con_data;
struct cm_con_data_t tmp_con_data;
int rc = 0;
char temp_char;
union ibv_gid my_gid;
if (config.gid_idx >= 0)
{
rc = ibv_query_gid(res->ib_ctx, config.ib_port, config.gid_idx, &my_gid);
if (rc)
{
fprintf(stderr, "could not get gid for port %d, index %d\n", config.ib_port,
config.gid_idx);
return rc;
}
}
else
memset(&my_gid, 0, sizeof my_gid);
/* exchange using TCP sockets info required to connect QPs */
local_con_data.addr = htonll((uintptr_t)res->buf);
local_con_data.rkey = htonl(res->mr->rkey);
local_con_data.qp_num = htonl(res->qp->qp_num);
local_con_data.lid = htons(res->port_attr.lid);
memcpy(local_con_data.gid, &my_gid, 16);
fprintf(stdout, "\nLocal LID = 0x%x\n", res->port_attr.lid);
if (sock_sync_data(res->sock, sizeof(struct cm_con_data_t), (char *) &local_con_data,
(char *) &tmp_con_data) < 0)
{
fprintf(stderr, "failed to exchange connection data between sides\n");
rc = 1;
goto connect_qp_exit;
}
remote_con_data.addr = ntohll(tmp_con_data.addr);
remote_con_data.rkey = ntohl(tmp_con_data.rkey);
remote_con_data.qp_num = ntohl(tmp_con_data.qp_num);
remote_con_data.lid = ntohs(tmp_con_data.lid);
memcpy(remote_con_data.gid, tmp_con_data.gid, 16);
/* save the remote side attributes, we will need it for the post SR */
res->remote_props = remote_con_data;
fprintf(stdout, "Remote address = 0x%"PRIx64"\n", remote_con_data.addr);
fprintf(stdout, "Remote rkey = 0x%x\n", remote_con_data.rkey);
fprintf(stdout, "Remote QP number = 0x%x\n", remote_con_data.qp_num);
fprintf(stdout, "Remote LID = 0x%x\n", remote_con_data.lid);
if (config.gid_idx >= 0)
{
uint8_t *p = remote_con_data.gid;
fprintf(stdout, "Remote GID =
%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7], p[8], p[9], p[10], p[11],
p[12], p[13], p[14], p[15]);
}
/* modify the QP to init */
rc = modify_qp_to_init(res->qp);
if (rc)
{
fprintf(stderr, "change QP state to INIT failed\n");
goto connect_qp_exit;
}
/* let the client post RR to be prepared for incoming messages */
if (config.server_name)
{
rc = post_receive(res);
if (rc)
{
fprintf(stderr, "failed to post RR\n");
goto connect_qp_exit;
}
}
/* modify the QP to RTR */
rc = modify_qp_to_rtr(res->qp, remote_con_data.qp_num, remote_con_data.lid,
remote_con_data.gid);
if (rc)
{
fprintf(stderr, "failed to modify QP state to RTR\n");
goto connect_qp_exit;
}
rc = modify_qp_to_rts(res->qp);
if (rc)
{
fprintf(stderr, "failed to modify QP state to RTR\n");
goto connect_qp_exit;
}
fprintf(stdout, "QP state was change to RTS\n");
/* sync to make sure that both sides are in states that they can connect to prevent packet loose */
if (sock_sync_data(res->sock, 1, "Q", &temp_char)) /* just send a dummy char back and forth */
{
fprintf(stderr, "sync error after QPs are were moved to RTS\n");
rc = 1;
}
connect_qp_exit:
return rc;
}
/******************************************************************************
* Function: resources_destroy
*
* Input
* res pointer to resources structure
*
* Output
* none
*
* Returns
* 0 on success, 1 on failure
*
* Description
* Cleanup and deallocate all resources used
******************************************************************************/
static int resources_destroy(struct resources *res)
{
int rc = 0;
if (res->qp)
if (ibv_destroy_qp(res->qp))
{
fprintf(stderr, "failed to destroy QP\n");
rc = 1;
}
if (res->mr)
if (ibv_dereg_mr(res->mr))
{
fprintf(stderr, "failed to deregister MR\n");
rc = 1;
}
if (res->buf)
free(res->buf);
if (res->cq)
if (ibv_destroy_cq(res->cq))
{
fprintf(stderr, "failed to destroy CQ\n");
rc = 1;
}
if (res->pd)
if (ibv_dealloc_pd(res->pd))
{
fprintf(stderr, "failed to deallocate PD\n");
rc = 1;
}
if (res->ib_ctx)
if (ibv_close_device(res->ib_ctx))
{
fprintf(stderr, "failed to close device context\n");
rc = 1;
}
if (res->sock >= 0)
if (close(res->sock))
{
fprintf(stderr, "failed to close socket\n");
rc = 1;
}
return rc;
}
/******************************************************************************
* Function: print_config
*
* Input
* none
*
* Output
* none
*
* Returns
* none
*
* Description
* Print out config information
******************************************************************************/
static void print_config(void)
{
fprintf(stdout, " ------------------------------------------------\n");
fprintf(stdout, " Device name : \"%s\"\n", config.dev_name);
fprintf(stdout, " IB port : %u\n", config.ib_port);
if (config.server_name)
fprintf(stdout, " IP : %s\n", config.server_name);
fprintf(stdout, " TCP port : %u\n", config.tcp_port);
if (config.gid_idx >= 0)
fprintf(stdout, " GID index : %u\n", config.gid_idx);
fprintf(stdout, " ------------------------------------------------\n\n");
}
/******************************************************************************
* Function: usage
*
* Input
* argv0 command line arguments
*
* Output
* none
*
* Returns
* none
*
* Description
* print a description of command line syntax
******************************************************************************/
static void usage(const char *argv0)
{
fprintf(stdout, "Usage:\n");
fprintf(stdout, " %s start a server and wait for connection\n", argv0);
fprintf(stdout, " %s <host> connect to server at <host>\n", argv0);
fprintf(stdout, "\n");
fprintf(stdout, "Options:\n");
fprintf(stdout, " -p, --port <port> listen on/connect to port <port> (default 18515)\n");
fprintf(stdout, " -d, --ib-dev <dev> use IB device <dev> (default first device found)\n");
fprintf(stdout, " -i, --ib-port <port> use port <port> of IB device (default 1)\n");
fprintf(stdout, " -g, --gid_idx <git index> gid index to be used in GRH (default not used)\n");
}
/******************************************************************************
* Function: main
*
* Input
* argc number of items in argv
* argv command line parameters
*
* Output
* none
*
* Returns
* 0 on success, 1 on failure
*
* Description
* Main program code
******************************************************************************/
int main(int argc, char *argv[])
{
struct resources res;
int rc = 1;
char temp_char;
/* parse the command line parameters */
while (1)
{
int c;
static struct option long_options[] =
{name = "port", has_arg = 1, val = 'p' },
{name = "ib-dev", has_arg = 1, val = 'd' },
{name = "ib-port", has_arg = 1, val = 'i' },
{name = "gid-idx", has_arg = 1, val = 'g' },
{name = NULL, has_arg = 0, val = '\0'}};
c = getopt_long(argc, argv, "p:d:i:g:", long_options, NULL);
if (c == -1)
break;
switch (c)
{
case 'p':
config.tcp_port = strtoul(optarg, NULL, 0);
break;
case 'd':
config.dev_name = strdup(optarg);
break;
case 'i':
config.ib_port = strtoul(optarg, NULL, 0);
if (config.ib_port < 0)
{
usage(argv[0]);
return 1;
}
break;
case 'g':
config.gid_idx = strtoul(optarg, NULL, 0);
if (config.gid_idx < 0)
{
usage(argv[0]);
return 1;
}
break;
default:
usage(argv[0]);
return 1;
}
}
/* parse the last parameter (if exists) as the server name */
if (optind == argc - 1)
config.server_name = argv[optind];
else if (optind < argc)
{
usage(argv[0]);
return 1;
}
/* print the used parameters for info*/
print_config();
/* init all of the resources, so cleanup will be easy */
resources_init(&res);
/* create resources before using them */
if (resources_create(&res))
{
fprintf(stderr, "failed to create resources\n");
goto main_exit;
}
/* connect the QPs */
if (connect_qp(&res))
{
fprintf(stderr, "failed to connect QPs\n");
goto main_exit;
}
/* let the server post the sr */
if (!config.server_name)
if (post_send(&res, IBV_WR_SEND))
{
fprintf(stderr, "failed to post sr\n");
goto main_exit;
}
/* in both sides we expect to get a completion */
if (poll_completion(&res))
{
fprintf(stderr, "poll completion failed\n");
goto main_exit;
}
/* after polling the completion we have the message in the client buffer too */
if (config.server_name)
fprintf(stdout, "Message is: '%s'\n", res.buf);
else
{
/* setup server buffer with read message */
strcpy(res.buf, RDMAMSGR);
}
/* Sync so we are sure server side has data ready before client tries to read it */
if (sock_sync_data(res.sock, 1, "R", &temp_char)) /* just send a dummy char back and forth */
{
fprintf(stderr, "sync error before RDMA ops\n");
rc = 1;
goto main_exit;
}
/* Now the client performs an RDMA read and then write on server.
Note that the server has no idea these events have occured */
if (config.server_name)
{
/* First we read contens of server's buffer */
if (post_send(&res, IBV_WR_RDMA_READ))
{
fprintf(stderr, "failed to post SR 2\n");
rc = 1;
goto main_exit;
}
if (poll_completion(&res))
{
fprintf(stderr, "poll completion failed 2\n");
rc = 1;
goto main_exit;
}
fprintf(stdout, "Contents of server's buffer: '%s'\n", res.buf);
/* Now we replace what's in the server's buffer */
strcpy(res.buf, RDMAMSGW);
fprintf(stdout, "Now replacing it with: '%s'\n", res.buf);
if (post_send(&res, IBV_WR_RDMA_WRITE))
{
fprintf(stderr, "failed to post SR 3\n");
rc = 1;
goto main_exit;
}
if (poll_completion(&res))
{
fprintf(stderr, "poll completion failed 3\n");
rc = 1;
goto main_exit;
}
}
/* Sync so server will know that client is done mucking with its memory */
if (sock_sync_data(res.sock, 1, "W", &temp_char)) /* just send a dummy char back and forth */
{
fprintf(stderr, "sync error after RDMA ops\n");
rc = 1;
goto main_exit;
}
if(!config.server_name)
fprintf(stdout, "Contents of server buffer: '%s'\n", res.buf);
rc = 0;
main_exit:
if (resources_destroy(&res))
{
fprintf(stderr, "failed to destroy resources\n");
rc = 1;
}
if(config.dev_name)
free((char *) config.dev_name);
fprintf(stdout, "\ntest result is %d\n", rc);
return rc;
}边栏推荐
- iNFTnews | 元宇宙进行时：那些跑步入场的互联网大厂在如何谋篇布局？
- Operation of simulated examination platform of recurrent training question bank for operation of refrigeration and air conditioning equipment in 2022
- Smart Cloud Light Gateway Service pour améliorer l'efficacité de la gestion de la production
- Sword finger offer 10- ii Frog jumping on steps
- 虚幻引擎UE4.26源码剖析之环境配置与初编译
- My eclipse connection database
- [neural network] (22) convmixer code reproduction, network analysis, complete tensorflow code attached
- Unity Netcode for GameObject 1.0.0 学习笔记（一）—— Hello World Demo
- 【LeetCode】128. Longest continuous sequence
- [leetcode] sword finger offer II 016 Longest substring without duplicate characters
猜你喜欢
Using GPU accelerated training model in keras; Install CUDA; cudnn； cudnn_ cnn_ infer64_ 8.dll is not in path; device_ lib. list_ local_ Devices has no GPU; hang up
Graduated in 985, failed to start a business at the age of 35, returned at the age of 36, and was laid off at the age of 40. What should middle-aged couples do if they are unemployed?
【FPGA】day15-串口协议uart回环工程
Phantom engine plug-in - Maya LIVELINK - install and use
Nodejs reported an internal error typeerror: cannot read property 'destroy' of undefined
MySQL 多表查询
【图像分类案例】(10) Vision Transformer 动物图像三分类，附Pytorch完整代码
![[program life]](/img/90/347b53a5725beec9107c49f8add148.png)
[program life] "stage summary" - at a loss
My eclipse connection database
2022 Shanghai safety officer C certificate examination simulation 100 questions and simulation examination
随机推荐
软件工程期末复习
【WIN】浏览器打不开网页出现DNS_PROBE_FINISHED_NO_INTERNET
Internet of things engineering design and Implementation
Where is safe and reliable for Hangzhou futures to open an account?
Operation of simulated examination platform of recurrent training question bank for operation of refrigeration and air conditioning equipment in 2022
When the MySQL service is started during initialization, it shows that net is neither an internal or external command nor a runnable program. How to solve this problem? This is the same as net Exe mis
【LeetCode】105. Constructing binary trees from preorder and inorder traversal sequences
JS鼠标经过改变字体颜色，离开恢复
重塑 IT 领导职业生涯的六种方法
zmq通信
51单片机学习记录（六）IIC，ADC部分
起薪1800，三年来手头只积攒一万块，裸辞奔赴一线城市月薪达3万
投资新手买收益率多少的理财产品合适？
With all due respect: programmers spend most of their time not writing code, but...
你不会还在用Xshell吧？这款开源的终端工具才是yyds！
Which of DV and ov SSL certificates is suitable for purchase on the company's website
Linux安装MySQL脚本
VirtualBox virtual machine network card settings
2022年制冷与空调设备运行操作复训题库模拟考试平台操作
生产线往越南转移未必是好选择，三星手机已受累并计划回归韩国