Thermistor PT100, NTC to 0-10v/4-20ma converter

summary :
     The thermal resistance temperature transmitter products developed by Beifu technology are mainly used for Ni1000, NTC 10K, NTC 20K, Pt100,Pt1000,Pt10, Cu50,Cu100, Thermocouple J/ K/ T/ E/ R/ S/ B Isolation and transmission of sensor signals such as type ( The sensor needs to be equipped by the user ), It is mainly used to measure various temperature signals in industry . The transmitter has linearization and long line compensation functions , The data is processed by single chip microcomputer algorithm , It ensures the accurate correspondence between the output signal and the temperature , When measuring thermocouples , Built in thermostat , It can be used for cold end compensation . When leaving the factory, it shall be corrected according to the national standard graduation table , Completely achieve 0.1 Level accuracy requirements . It can also be customized according to the graduation table provided by the user , Meet the measurement needs of customers . Input 、 The output is completely isolated from the auxiliary power supply （ Three isolation ）, Can bear 2500VDC Isolation and withstand voltage of .

Product adoption DIN35 International standard guide rail installation method , Small volume 、 High precision , Stable performance 、 High cost performance , It can be widely used in petroleum 、 chemical 、 Electric power 、 Instrumentation and industrial control industries .
    IBF16 Series temperature signal isolation amplifier is very convenient to use , Just connect the wire , The isolation and transmission of temperature signal can be realized . For specific selection, please refer to the table of product selection , You can also consult the customer service staff of Beifu technology .

 

The main features :
>> transport 　　 Enter into ：Ni1000, NTC 10K, NTC 20K,

Pt100, Pt1000,Pt10,Cu50,Cu100,

Thermocouple J/ K/ T/ E/ R/ S/ B Type and so on

( The measured temperature range can be customized )

( You can also customize nonlinear voltage and current signals )
>> The output signal ：4~20mA,0~5V,0-10V Wait for the standard signal

You can also choose 12V Of PWM Signal output
>> Auxiliary power supply ：5V、9V、12V、15V or 24V DC single power supply
>> Industrial grade temperature range : - 45 ~ + 85 ℃
>> Accuracy class ：0.1 level (FSR%, Relative to temperature )
>> Including linear algorithm processing and long-term compensation function
>> Isolation and withstand voltage ：2500VDC(1mA,60S), Input / Output / Power Supply Three isolation
>> Installation mode ：DIN35 Guide rail installation
>> Dimensions ：79x69.5x25mm   

 

 

 

Input ：Ni1000   Temperature range ：-20~100℃  Supply voltage ：24V   Output ：4-20mA
model ： IBF16-Ni-T1-P1-A4

Model selection examples 2：
Input ：Pt1000 Temperature range ：0~200℃   Supply voltage ：12V   Output ：0-10V
model ： IBF16-Z5-T4-P2-V2

 

General parameters ：

fine    degree   ------- 0.1% （ Relative to temperature ）

transport    Enter into   ------- Ni1000, NTC 10K, NTC 20K, Default two-line input

Pt100, Pt1000,Pt10,Cu50,Cu100,  Default three line input

Thermocouple J/ K/ T/ E/ R/ S/ B type   Two line input

                  When ordering, you need to select a temperature range to correspond to the output .

transport    Out   ------- Standard voltage or current signal . It can also be customized by users . You can also choose 12V Of PWM Signal output .

response time ------- ≤100mS

Auxiliary power supply ------- DC5V、9V、12V、15V、24V

work     rate ------- < 1W

Temperature drift ------- 50ppm/℃（ Typical values ）

Load capacity ------- The output voltage ：≥ 2 kΩ

Current output ：≤ 450Ω

Partition     leave ------- Signal input / Output / Output / Auxiliary power supply   Three isolation

Isolation voltage ------- 2500VDC,1 minute , Leakage current 1mA

Impulse withstand voltage ------- 3KV, 1.2/50us( Peak value )

working temperature ------- -40 ~ +85℃

Storage temperature ------- -40 ~ +85℃   

Working humidity ------- 10 ~ 90% ( No condensation )

Storage humidity ------- 10 ~ 95% ( No condensation )