2022 latest examination questions and answers of eight members (standard staff) of Shanghai Architecture

The 100% question bank provides Building eight （ Standard Officer ） Examination questions 、 Building eight （ Standard Officer ） The real exam question 、 Building eight （ Standard Officer ） Certificate examination question bank, etc , Provide online questions and brush questions , Online mock exam , Help you pass the exam easily .

 

25. The standard number is GB/T50214-2013 yes （）.

A. Technical specification for composite steel formwork

B. Technical code for application of geosynthetics

C. Technical specification for tube well

D. Code for construction of residential decoration

answer ：A

analysis ： The standard number is GB/T50214-2013 It is the technical specification of composite steel formwork .

26. according to 《 Technical code for safety of temporary electricity on construction site 》JGJ46-2005, When there are overhead lines around the project under construction , When the voltage level of the external power line is 1~10kV when , Projects under construction （ Including scaffold ） The minimum safe operation distance between the periphery of the and the sideline of the overhead line is （）.

A.10m

B.5m

C.6m

D.4m

answer ：C

analysis ： according to 《 Technical code for safety of temporary electricity on construction site 》JGJ46-2005, When there are overhead lines around the project under construction , When the voltage level of the external power line is 1~10kV when , Projects under construction （ Including scaffold ） The minimum safe operation distance between the periphery of the and the sideline of the overhead line is 6m.

27. according to 《 Code for acceptance of construction quality of concrete structures 》GB50204-2015, During reinforcement installation , Grade of stressed reinforcement 、（） And the quantity must meet the design requirements .

A. Location

B. weight

C. Number of roots

D. specifications

answer ：D

analysis ： according to 《 Code for acceptance of construction quality of concrete structures 》GB50204-2015, During reinforcement installation , Grade of stressed reinforcement 、 The specification and quantity must meet the design requirements .

 

28. according to 《 Construction elevator installation 、 Use 、 Safety technical regulations for disassembly 》JGJ215-2010, Do not use （） As the control switch for stopping operation .

A. Leakage protector

B. Travel limit switch

C. sensor

D. Luffing limiter

answer ：B

analysis ： according to 《 Construction elevator installation 、 Use 、 Safety technical regulations for disassembly 》JGJ215-2010, It is forbidden to use the travel limit switch as the control switch for stopping operation .

29. according to 《 Unified standard for construction quality acceptance of construction engineering 》GB50300-2013, After repair or reinforcement, it still cannot meet （） Or divisional works and unit works of important functions , Acceptance is strictly prohibited .

A. Size

B. elevation

C. Security

D. weight

answer ：C

analysis ： according to 《 Unified standard for construction quality acceptance of construction engineering 》GB50300-2013, Divisional works and unit works that cannot meet the safety or important use functions after repair or reinforcement , Acceptance is strictly prohibited .

30. according to 《 Safety technical code for fastener type steel pipe scaffold in building construction 》JGJ130-2011, When the scaffold pole foundation is not at the same height , Must be （） Extend two spans and fix with the vertical pole , The height difference should not be greater than 1m.

A. Add fasteners

B. In addition, add longitudinal sweeping rod

C. The lower longitudinal sweeping rod goes up

D. The vertical sweeping rod at the top is lower

answer ：D

analysis ： according to 《 Safety technical code for fastener type steel pipe scaffold in building construction 》JGJ130-2011, When the scaffold pole foundation is not at the same height , The longitudinal sweeping pole at the top must be extended to the bottom for two spans and fixed with the vertical pole , The height difference should not be greater than 1m.

31.《 Safety technical code for fastener type steel pipe scaffold in building construction 》 comprehensive 、 This paper systematically puts forward the fastener type full hall scaffold 、 Full of support frames （）.

A. Safety

B. System

C. Construction method

D. Construction skills

answer ：A

analysis ：《 Safety technical code for fastener type steel pipe scaffold in building construction 》 comprehensive 、 This paper systematically puts forward the fastener type full hall scaffold 、 The safety of the full support frame .

32. according to 《 Code for construction and quality acceptance of Urban Road Engineering 》CJJ1-2008, Earthwork subgrade construction , When cooperating with personnel to work within the range of machinery , mechanical （）.

A. Should leave

B. Work at the same time with cooperating personnel

C. It has to be shut down

D. The operation must be stopped

answer ：D

analysis ： according to 《 Code for construction and quality acceptance of Urban Road Engineering 》CJJ1-2008, Earthwork subgrade construction , When cooperating with personnel to work within the range of machinery , The machine must stop working .