Thoughts on the construction of Meizhou cell room

Construction content of Meizhou cell room , Divide from the functional area of the Laboratory ,SICOLAB Xiaobian will take you to talk about the details of cell laboratory construction

One 、 Requirements for the construction of cell laboratory

The basic requirements

1. The total construction area should not be less than 1000m2.

2. The usable area of the clean area should not be less than 500m2.

3. The clear height of the clean room should be 2.5- 2.8m Between .

Two 、 Construction of cell laboratory : Functional area division SICOLAB

1. The washing room

It depends on the workload , Generally, the area is controlled at 30-50m2. A dedicated washing sink is set at one side of the laboratory , Used to clean glassware . The central test bench shall also be equipped with 2 A sink , Used for cleaning small glassware . If the workload is heavy , You can buy a bottle washing machine . Get ready 1-2 A washing liquid tank , It is specially used for washing glassware that requires high cleanliness . In addition, it shall be equipped with a water rack 、 Drying box 、 Cabinet 、 Ultrasonic cleaner, etc . The ground shall be moisture resistant and well drained .

2. Medium preparation room

area 60 Square meters or so , The main instruments and equipment equipped are : The refrigerator 、 balance 、 The microwave oven 、pH meter 、 Culture medium dispenser 、 Medicine cabinet 、 Instrument cabinet 、 Air extraction pump 、 Electric furnace 、 Culture bottles of various specifications 、 Petri dishes 、 Pipette 、 Beaker 、 Measuring cylinder 、 Volumetric flask 、 Storage bottle, etc . Refrigerator in volume 180 -200L It is advisable to , Used to store the mother liquor of culture medium 、 Hormones, vitamins and other valuable drugs 、 colour film 、 And the preservation of plant materials . The balance shall have different sensitivities .

3. Disinfection room

Equipped with test bench 、 Autoclave 、 Exhaust fire extinguishing equipment 、 Bacteria filtration equipment 、 Dry heat disinfection cabinet 、 Electric furnace, etc . The selection of sterilization pot shall be based on different requirements . Small medical portable autoclaves can be used in general laboratories , Larger laboratories can choose vertical sterilization pots that automatically control pressure and temperature . Large horizontal sterilization pots can be used in productive laboratories .

4. Sterile operation room

The sterile operation room is mainly used for the inoculation of experimental materials , So it is also called vaccination room . It usually consists of two rooms inside and outside , The outer room is a buffer room , For preparatory work , It can also prevent pollution . The door of the buffer room should be staggered with the door of the inoculation room , Don't open both doors at the same time , To ensure that the sterile room will not bring in miscellaneous bacteria due to the opening of the door and the entry and exit of people .

5. Culture room

In order to control the temperature, illumination time and intensity of the culture room , No windows in the room of the training room , But a ventilation window should be left , And install exhaust fan . Indoor temperature is controlled by air conditioner , The light is controlled by fluorescent lamps . The ceiling and interior walls are easily decorated with plastic steel plates , The ground is laid with terrazzo or ceramic tiles , There are usually two rooms , One is light culture room , One is dark culture room . There should be a preparation room or corridor outside the training room .