Nport serial server configuration website (whether the serial server is from network port to serial port)

Hello everyone , I meet you again , I'm your friend, Quan Jun .

NPort Serial server has points “ Drive mode ” And “socket Pattern ”

If your program communicates through serial port , So please select NPort Of “ Drive mode ”, That is to add virtual serial port to the host , The specific installation configuration is ( Here we use windows For example )：

1、 adopt NPort Search Utility Find... On the Internet NPort, Please send the host IP And NPort IP In the same segment ,NPort Default IP：192.168.127.254

2、 Choose the corresponding NPort double-click ;

3、 Get into web Configuration interface , stay “Operating Mode” Next , Select the corresponding port as Real COM Mode

4、 choice “Real COM Mode” After the model , Use “NPort Windows Driver Manager” Port mapping

5、 Click on “Add” The corresponding Nport The port of is mapped to the host , And set the port number

6、 Click on “Apply” preservation , sign out

For specific configuration and testing, please refer to NPort Drive mode

stay “socket Pattern ” Under the installation configuration ( With windows,NPort The model is TCP server For example )

1、2 Two step sum Real COM Mode equally , Step 3 please choose TCP server(client perhaps UDP Equal mode , Please specify according to your host application interface )

stay TCP server There is no need to map ports in mode

Then we set Local TCP Port, If we do not set up , The system will press the default first serial port 4001, Second serial port 4002, The third serial port 4003…. To carry out TCP Port settings

For specific configuration and testing, please refer to NPort socket Pattern

Publisher ： Full stack programmer stack length , Reprint please indicate the source ：https://javaforall.cn/128512.html Link to the original text ：https://javaforall.cn