EN 1873 assembly accessories for roofing - plastic single roof lamps - CE certification

Single roof lamp CE authentication （ EU compulsory certification ）－ brief introduction

In the EU market “CE” The mark is a compulsory certification mark , To show that the product complies with the EU 《 New methods of technical coordination and Standardization 》 The basic requirements of the directive . This is a mandatory requirement of EU law on products .

Paste on a single roof lamp product CE The logo can not only prove that its products comply with the building products directive （CPR 305/2011/EU） And related standards （ Harmonized European standards EN 1873） Prescribed safety , Environmental protection , Health and consumer protection . And it can reasonably avoid technical barriers to trade , Sell freely in the European market and open up other international markets .

notes ： EU building regulations CPR（Construction Product Regulation） 305/2011/EU Fully replace the EU construction products directive CPD(Construction Product Directive) 106/89/EEC, And from 2013 year 7 month 1 Enforcement from

EN 1873 Assembly accessories for roofing . The standard name of a single roof lamp is ：

EN 1873-2005 Prefabricated accessories for roofing - Individual roof lights of plastics - Product specification and test methods

EN 1873-2005 Assembly accessories for roofing . Plastic single roof lamp . Product specifications and test methods

Want to get a single roof lamp product CE Certification requires compliance with the product directive ： Building product regulations CPR(Construction Product Regulation) 305/2011/EU, as well as , Harmonized European standards ：EN 1873

EN 1873 Single roof lamp CE The product range involved in the certification ：

This European standard specifies that plastic materials ( Such as GF-UP, PC,PMMA, PVC) Requirements for roof lamps made of , Include or exclude by GF-UP, PVC, steel , Brackets made of aluminum or wood , For installation on the roof . These roof lights are designed to be illuminated by daylight , And ventilate the indoor space through open devices .

This standard is applicable to rectangular or circular ground plane ( See the picture 1 Sum graph 2), Opening span ( Width ) Or the diameter is not greater than 2.5 m, The opening length shall not be greater than 3.0 m Roof lamp of , The inclination angle of the ceiling lamp shall not exceed 25°. This document does not include roof lights that have an impact on the load-bearing or stiffness of the roof .

This European standard applies to ceiling lamps without brackets , And the ceiling lamp with all ceiling lamp assemblies with brackets provided by one manufacturer , These components are purchased at one time .

Smoke exhaust and thermal ventilation in case of fire and possible additional functions of roof access are not within the scope of this standard .

This European standard does not cover construction 、 Calculation related to design requirements and installation technology .

notes : Safety of individual roof lights 、 application 、 See the attachment for use and maintenance instructions A.

Single roof lamp CE authentication － The certification process ：

1、 Determine the type of product to be certified , Application for submission

2、 Determine the European product directive , Individual roof lights need to comply with the new EU building products regulations CPR 305/2011/EU

3、 Determination of harmonized European standards , Individual roof lights need to comply with harmonized standards EN 1873

4、 according to CPR Directives and harmonized standards EN 1873 Test and evaluate , EU notified certification bodies according to the certification system 3 Conduct test certification

5、 Obtain test reports and certificates issued by EU notified bodies

6、 Issue product performance statement (Declaration of Performance)

7、 The product package is pasted with the code of the notified body CE sign

8、 Sell freely in the European market

come from JJ2022