Acquisition data transmission mode and online monitoring system of vibrating wire wireless acquisition instrument for engineering instruments

Vibrating wire wireless acquisition instrument

Each time the device starts, the collected sensor data will be stored internally , And send the data at the set time interval , By modifying the “ Data transmission mode ” Parameters , The monitoring data can be output by the data interface or sent through the wireless network . When sending monitoring data , Can be modified by “ Packet protocol ” Parameter to set the style of the sent packet . The relevant parameters are as follows ：

Hebei stable control technology Co., Ltd VS-Box Data transmission mode of vibrating wire wireless acquisition instrument

1. Send data to mobile phone

Hebei stable control technology Co., Ltd VS-Box The data of vibrating wire wireless acquisition instrument is sent to the mobile phone

2. Send data to mailbox

Hebei stable control technology Co., Ltd VS-Box Send the data of vibrating wire wireless acquisition instrument to the mailbox

3. Send data to FTP The server

Parameter configuration （ The following parameters are located at 【 Parameter configuration 】 In the area 【 Automatic mode parameters 】 and 【 GPRS】 In panel ） Data transmission mode ： GPRS FTP

FTP Other relevant parameters may not be configured , Use the parameters we have configured for the device , If you need to use your own FTP The server , Modify the server address according to the actual situation 、 Parameters such as port can be . Click on 【 Save parameters 】 Button , Power up the equipment again , Press the 【 test / send out 】 Key to start a mining process . When you hear the buzzer sending a prompt tone （ Two consecutive short tones ） after , FTP The server will receive the monitoring data . The device shuts down automatically , Start the cycle at the set time interval , The server will receive monitoring data regularly .

Hebei stable control technology Co., Ltd VS-Box Send the data of vibrating wire wireless acquisition instrument to the server

Open the browser , Enter the FTP Server address , The user login dialog box pops up , Enter the user name and password we provided , Click on 【 Sign in 】, You can see all the monitoring data related to your purchased equipment .

4. Send data to TCP The server

Parameter configuration （ The following parameters are located at 【 Parameter configuration 】 In the area 【 Automatic mode parameters 】 and 【 GPRS】 In panel ）

Data transmission mode ： GPRS TCP

Packet protocol ： character string 1.0

TCP Other relevant parameters may not be configured , Use the parameters we have configured for the device , If you need to use your own TCP The server , Modify the server address according to the actual situation 、 Parameters such as port can be .

Hebei stable control technology Co., Ltd VS-Box Details of online monitoring and management system operation of vibrating wire wireless acquisition instrument

An online monitoring and management system developed by end customers is provided for each device , be based on BS framework . Project management can be realized on the browser 、 Data viewing and downloading 、 Curve viewing and other operations . The system interface style is simple 、 Uniform layout 、 Clear logic , Excellent control experience . Three layer monitoring element architecture , Realize multiple projects 、 Multi device 、 Infinite expansion of multiple measuring points , It can meet small 、 Medium sized single （ many ） project management .