Pfc232-sop8/14/16 should be wide-ranging and can be tape programmed with burning program

PFC232-SOP8/14/16 Should be a first-class agent Original *** It can be programmed with burning

System features
1.	2KW MTP Program space for two FPP Unit uses （ Programmable design 1000 Time ）
2.	128 Bytes Data space for two FPP Unit uses
3.	One 16 Bit timer
4.	Two 8 Band PWM Function timer
5.	Three 11 position PWM generator
6.	Provide a comparator
7.	Provide an operational amplifier （OPA）
8.	Provide 1T 8×8 Hardware multiplier
9.	14 individual IO Pin , There are optional pull ups / Pull down resistance
10.	Every IO All pins have system wake-up function
11.	For each setting of wake-up function IO, There are two selectable wake-up speeds ： Normal wake-up and fast wake-up
12.	Inside Bandgap Circuit provision 1.2V Reference voltage
13.	12 channel 12 position ADC, One of the channels comes from the inside bandgap Reference voltage or 0.25*VDD
14.	Provide ADC Refer to the high voltage option ： External input , Inside VDD,bandgap（1.2V）,4V,3V,2V
15.	Clock mode ： External crystal oscillator 、 Internal high frequency oscillator 、 Internal low frequency oscillator
16.	The built-in VDD/2 Bias voltage generator , Can support 5×9 Lattice LCD screen
17.	8 paragraph LVR Reset setting , from 1.8V To 4.5V
18.	4 External interrupt input pins

CPU characteristic
1.	Working mode ： Two FPPATM Processing unit operation mode or single processing unit operation mode
2.	89 Efficient instructions
3.	Most instructions are single cycle (1T) Instructions
4.	Programmable stack pointer and stack depth
5.	Data access supports both direct and indirect addressing modes , The data memory can be used as the data pointer of indirect addressing mode (index pointer)
6.	Register address space 、 Data storage space 、MTP Program space is independent of each other