MSc 307 (88) (2010 FTPC code) Part 2 smoke and toxicity test

MSC 307(88) (2010 FTPC Code)- Standard name

MSC 307(88)Adoption of the international code for application of fire test procedures

MSC 307(88)2010 International Code for the application of fire test procedures

IMO MSC 307（88）/ IMO FTPC Part 2:：

Smoke And Toxicity Test Smoke toxicity test

ISO 5659-2: Plastic-Smoke generation, Part 2 Determination of optical density by a single chamber test / ISO 5659-2:  plastic - Smoke generation - The optical density is measured with a single combustion chamber

Scope of application ： bulkhead 、 The surface material of the ceiling 、 Flooring materials 、 Deck covering 、 Plastic pipes 、 Cable, etc

Limit of optical smoke density ：

Limit of each component of poison gas ：

carbon monoxide CO：1450ppm

Hydrogen bromide HBr：600ppm

Hydrogen chloride HCl：600ppm

Hydrogen cyanide HCN：140ppm

Hydrogen fluoride HF：600ppm

Sulfur dioxide SO2：120ppm

Nitrogen oxides NOx：350ppm

MSC 307(88) (2010 FTPC Code)Part 2–  Applicability

It is required that a material cannot produce excessive smoke and toxic products or cause toxic hazards when the temperature rises , The material shall comply with the provisions of this part .

MSC 307(88) (2010 FTPC Code) Part 2 – References

ISO 5659-2:2006 plastic - Smoke generation - The second part ： Determine the optical density by single box test

ISO 13943 Fire safety - vocabulary

ISO 19701 Toxicity test of combustion products - use FTIR Gas analysis guide for the analysis of gases and vapors in combustion products

MSC 307(88) (2010 FTPC Code) – Reference standards

ASTM E1317 Test method for flammability of ship surface decoration materials

IMO FTPC Part 2 Smoke toxicity test – Flame retardant test of marine equipment , Fire test

IMO FTPC Flame retardant test of ship materials , Fire test

ASTM F 3059 Code for inspection of FRP gratings for ships

ISO 7840 Fire resistant oil hose for small ships

come from GF2022