Lenovo Savior r7000+ add ssd+ copy and partition the information of the original D disk to the new SSD

1. background

1. ** demand :** Newly bought Samsung 980SSD,500GB, retrofitting SSD( Associate with the Savior R7000 Up to 3 block SSD, retrofitting SSD( That is to hold 2 block SSD) Do not install after HDD This is caused by its card slot design ; Deliverer R7000 M.2 Interface SSD Can be added )

2. ** Native hardware :** Associate with the Savior R7000 Memory 16GB Original Samsung SSD(500GB)

3. Native system :windows11 Family Chinese (21H2)

attach SSD After installation , Three star magician Actual inspection diagram :

Original SSD Parameters :

[ Failed to transfer the external chain picture , The origin station may have anti-theft chain mechanism , It is suggested to save the pictures and upload them directly (img-irYnCdx4-1643258530164)( Data analysis -MATLAB.assets/image-20220127114143660.png)]

To be installed SSD Measured parameters :

[ Failed to transfer the external chain picture , The origin station may have anti-theft chain mechanism , It is suggested to save the pictures and upload them directly (img-9JmD2R5y-1643258530165)( Data analysis -MATLAB.assets/image-20220127114215067.png)]

2. Replacement process

reference Deliverer bibibili Official video

Disassembly picture reference :

[ Failed to transfer the external chain picture , The origin station may have anti-theft chain mechanism , It is suggested to save the pictures and upload them directly (img-F7pNnVSA-1643258530166)( Data analysis -MATLAB.assets/QQ picture 20220127115101.jpg)]

Pictured left M.2 SSD2 It's about , It can hold two pieces M.2 SSD;

On the right side M.2 SSD2 It's about , An original piece is installed M.2 SSD

( You can also see on the way , Add SSD after , This card slot cannot be installed HDD Of )

Attention during disassembly :

1. This time, three sets of screws will be removed : Demolition D shell : above 7 star ( Long screw ), below 4 star ( Short screw ) Demolition HDD: Four pieces
2. The general process is Make sure to shut down , Loosen the power wiring –> Demolition D shell ( That is, the protective shell on the back of the computer , After dismantling, you can see the above figure ) --> Demolition HDD Four screws around , uninstall Hard disk shield --> retrofitting SSD --> Remove from HDD Of the four screws obtained , Choose one , To secure SSD --> Install the remaining three screws back to the original position --> Plug the power connection tightly --> retrofitting D cover ( The screws will not be installed for the time being )–> Turn it on --> If it can start normally , Add screws
3. Be careful :D shell Tighter , You can use a paddle when disassembling , Try harder , don 't worry , Resistance to manufacture
4. Fix SSD, Just borrow one of those four , You don't need to buy it alone

3. Operation after installation

1. After installation , Because it has not been initialized , You can't see the hard drive ,WIN+S Shortcut key , Find to enter : Computer management , Click store –> Disk management , Find the corresponding hardware , Initialization , The corresponding hard disk drive cannot be seen until the drive letter is assigned

2. At this point, my partition structure :

disk 0: Original SSD, It is divided into C disc ,D disc

disk 1: retrofitting SSD, disk 1 It has just been initialized , It is still assigned a drive letter , Therefore, unallocated

[ Failed to transfer the external chain picture , The origin station may have anti-theft chain mechanism , It is suggested to save the pictures and upload them directly (img-7oNVNY5R-1643258530167)( Data analysis -MATLAB.assets/QQ picture 20220127122109.png)]

3. My purpose :

I want a big one C disc , therefore want D Copy disk information to unallocated disks ( To copy , Must be disk 1 Assign drive letters , I assigned E)

Need to complete :

1. For disk 1 Assign drive letters E
2. download DiskGenius, Use " Copy partition " function , Original division :D Target area :E ( Be careful :" Copy partition " The function will empty the target partition ,E There was nothing on the plate , So no problem )
3. Delete D disc ,E Reassign the drive letter to D

Achieve results : , Due to shortcuts , Documents, etc. , All are located according to the drive letter , To distinguish between different hard disks , So old and new D disc , There is no difference in the application view ,

So the original D Applications on disk , Registry information , Documents, etc. , Will redirect to the new D disc , perfect , The application does not need to be reinstalled

result :

[ Failed to transfer the external chain picture , The origin station may have anti-theft chain mechanism , It is suggested to save the pictures and upload them directly (img-aCULb1Cw-1643258530167)( Data analysis -MATLAB.assets/image-20220127122141664.png)]