DXF reading and writing: Chinese description of dimension style group codes

DIMALT
Controls the display of alternate units in dimensions

DIMALTD
Control the number of decimal places in the conversion unit

DIMALTF
Control conversion unit multiplier

DIMALTTD
Set the decimal places of tolerance values in alternate dimension units

DIMALTTZ
Control the zero elimination of tolerance values

DIMALTU
Set all secondary dimension styles （ Except for angular dimensions ） Conversion unit format

DIMALTZ
Controls the zeroing of alternate unit dimension values

DIMAPOST
Specify for all dimension types （ Except for angular dimensions ） The text prefix or suffix of the measured value of the conversion dimension （ Or both ）

DIMASZ
Control dimension line 、 The size of the leader arrow

DIMATFIT
When there is not enough space in the extension line to place dimension text and arrows at the same time , This system variable will determine how the two are arranged

DIMAUNIT
Format the units of angular dimensions

DIMAZIN
Eliminate zeros for angular dimensions

DIMBLK
Set the arrow block displayed at the end of the dimension line or leader

DIMBLK1
Set the arrow of the first endpoint of the dimension line （ When DIMSAH by “ open ” when ）

DIMBLK2
Set the arrow of the second endpoint of the dimension line （ When DIMSAH by “ open ” when ）

DIMCLRD
Is dimension line 、 Arrows and dimension leaders specify colors

DIMCLRE
Assign color to extension lines

DIMCLRT
Assign color to dimension text . This color can be any valid color number

DIMDEC
Set the number of decimal places displayed in the primary unit of the dimension

DIMDLE
When using a small slash instead of an arrow for annotation , Set the distance of the dimension line beyond the extension line

DIMDLI
Controls the spacing of dimension lines in baseline dimensions

DIMEXE
Specify the distance that the dimension line extends beyond the extension line

DIMEXO
Specify the distance of the extension line from the origin

DIMFRAC
Format scores （ When DIMLUNIT The system variable is set to 4 [ Architecture ] or 5 [ fraction ] when ）

DIMFXL
Set the total length of the extension line from the dimension line to the dimension origin

DIMFXLON
Controls whether extension lines are set to a fixed length

DIMGAP
When the dimension line is divided into two segments so that the dimension text is placed between the two segments , Set the distance around the dimension text

DIMJUST
Control the horizontal position of dimension text

DIMLFAC
Set the scale factor for linear dimension measurements

DIMLIM
Generate dimension limits as default text

DIMLTEX1
Set the linetype of the first extension line

DIMLTEX2
Set the linetype of the second extension line

DIMLTYPE
Set the linetype of the dimension line

DIMLUNIT
Set all dimension types （ Except for angular dimensions ） The unit of

DIMLWD
Specify line weights for dimension lines

DIMLWE
Specify lineweight for extension lines

DIMPOST
Specify a text prefix or suffix for dimension measurements （ Or both ）

DIMRND
Round all dimension distances to the specified value

DIMSAH
Controls the display of dimension line arrow blocks

DIMSD1
Controls whether to suppress the display of the first dimension line

DIMSD2
Controls whether to suppress the display of the second dimension line

DIMSE1
Controls whether to suppress the display of the first extension line

DIMSE2
Controls whether to suppress the display of the second extension line

DIMSOXD
If there is not enough space in the extension line , The arrow is prohibited

DIMTAD
Controls the vertical position of text relative to the dimension line

DIMTDEC
Set the number of decimal places to be displayed in the tolerance value of the dimension primary unit

DIMTFAC
And through DIMTXT The system variable settings are the same , Specifies the scale factor of the text height of the fraction and tolerance values relative to the dimension text height

DIMTFILL
Control the background of dimension text

DIMTFILLCLR
Set the color of the text background in the dimension

DIMTIH
Control all dimension types （ Except for coordinate dimensions ） The position of the dimension text within the extension line

DIMTIX
Draw text between extension lines

DIMTM
Set the minimum dimension text （ Next ） Tolerance limit （ When DIMTOL or DIMLIM When set to on ）

DIMTOFL
Controls whether dimension lines are drawn between extension lines （ Even if the dimension text is placed outside the extension lines ）

DIMTOH
Control the position of dimension text outside the extension line

DIMTOL
Attach the tolerance to the dimension text .

DIMTP
Set the maximum dimension text （ On ） Tolerance limit （ When DIMTOL or DIMLIM When set to on ）

DIMTSZ
Specify linear dimensions 、 The size of the small slash used to replace the arrow in radius dimensions and diameter dimensions

DIMTVP
Controls the vertical position of dimension text above or below the dimension line

DIMTXSTY
Specify the text style of the dimension

DIMTXT
Specify the height of the dimension text （ Unless the current text style has a fixed height ）

DIMTZIN
Control the zero elimination of tolerance values

DIMUPT
Control user positioning text options

DIMZIN
Control the zero elimination of the primary unit value