Zabbix4.0 uses SNMP agent to monitor vcenter6.5

The company uses vSphere6.5, Use vSphere 6.5 Conduct management ,vSphere What is deployed is vcsa(vCenter Server Appliance), Is essentially a Linux virtual machine .

In the use of vsphere client, At the time of landing , It can only be found for vcenter To configure SNMP trap, take snmp The alarm information is sent to the designated host , I won't support it get operation , therefore zabbix It can't be well monitored .

vcenter On the configuration snmp agent

If configured  vCenter Server Appliance SNMP Proxy for polling , Then it can listen and respond from SNMP Manage client system requests , Such as  GET、GETNEXT  and  GETBULK  request .

Use root Identity entry vcenter Command line

Turn on snmp agent

snmp.enable

Copy

Set up snmp port

snmp.set --port 161

Copy

To configure snmp Community

nmp.set --communities public

Copy

And then again zabbix The server Upper use snmpwalk command , See if you can get OID

snmpwalk -v 1 -c public 172.31.207.20

The result indicates that the configuration is successful

zabbix On the configuration

zabbix There are ready-made templates on the official website https://share.zabbix.com/virtualization/vmware/snmp-check-vcenter-vcsa-6-5

Import to use

Then configure in the host , As usual snmp Host monitoring mode configuration , Just apply the template

What we should pay attention to here is , It needs to be configured in the macro {$SNMP_PORT}, Otherwise, the template monitoring items will not work

Wait for a while , It will take effect automatically

The next step is to configure the appropriate triggers and graphics to complete vcenter Monitoring of .