Ethernet to RS485 serial port counter WiFi module LED light controller ibf165

Product features ：

●  3 Circuit switch input ,2 Circuit switch output

●  DI Each channel can be used as a counter or frequency measurement

●  DO Each channel can be output independently PWM The signal

● Support Modbus TCP Communication protocol

● Built in web features , You can query the level status through the web page

● You can set the output status through the web page

● Wide power supply range ：8 ~ 32VDC

● High reliability , Easy to program , Easy to use

● standard DIN35 Guide rail installation , Convenient for centralized wiring

● Users can set up modules on the web page IP Address and other parameters

● Low cost 、 Small size 、 Modular design

● Dimensions ：79 x 69.5x 25mm

Typical applications ：

● Flowmeter pulse counting or flow measurement

●  LED Light control or motor control

● Intelligent building control 、 Security engineering and other application systems

● Ethernet industrial automation control system

● Industrial field signal isolation and long line transmission

● Equipment operation monitoring and control

● Sensor signal measurement

● Industrial camera condition monitoring and control

● IOT switch signal acquisition

 

Product overview ：

IBF165 The product is a collection module of Internet of things and industrial Ethernet , The transparent data interaction between sensor and network is realized . You can forward sensor data to the network , Or forward data from the network to the sensor .

IBF165 Series products include power conditioning , Switch acquisition 、 Triode output and Wifi Interface communication . Communication mode adopted MODBUS TCP agreement .TCP It's a transport layer based protocol , It's widely used , Connection oriented reliable protocol . Users can set up modules directly on the web page IP Address 、 Subnet mask, etc . It can be used to monitor and control the operation of sensor equipment .

IBF165 The series of products are based on the intelligent monitoring and control system of single chip microcomputer , User set module IP Address 、 Configuration information such as subnet mask is stored in nonvolatile memory EEPROM in .

IBF165 The series products are designed according to industrial standards 、 manufacture , Strong anti-interference ability , High reliability . Operating temperature range - 45℃～+80℃.

 

IBF165 General parameters ：

(typical @ +25℃,Vs by 24VDC)

Input type ：   Switching value input ,3 passageway （DI0~DI2）.

             Low level ： Input   < 1V    High level ： Input   3.5 ~ 30V            

             frequency range 0-20KHz

             Counting range 0-0xFFFFFFFF

Input resistance ：  30KΩ

The output type ：  Open collector output , voltage 0~30V, Maximum load current 30mA,2 passageway （DO0~DO1）.

             PWM frequency 100~1000Hz, Duty cycle 0%~100%

through     News ：   MODBUS TCP Communication protocol

network     page ：   Support web access module , Support web page setting module parameters .

Pick up     mouth ：   WiFi Network interface .

Working power supply ：    +8 ~ 32VDC Wide power supply range , There are anti reverse connection and over-voltage protection circuit inside

Power consumption ：    Less than 1W

working temperature ：    - 45 ~ +80℃         

Working humidity ：   10 ~ 90% ( No condensation )

Storage temperature ：   - 45 ~ +80℃              

Storage humidity ：   10 ~ 95% ( No condensation )                                     

Isolation and withstand voltage ：   Non segregated

Dimensions ：   79 mm  x  69.5mm  x  25mm