Varnish foundation overview 6

Use /etc/init.d/varnish restart Restart the service

[[email protected] varnish]# /etc/init.d/varnish restart 
Stopping Varnish Cache:                                    [  OK  ]
Starting Varnish Cache:                                    [  OK  ]
[[email protected] varnish]#

Copy

Tip: Use... In this case /etc/init.d/varnish reload The configuration cannot be reloaded

At this time, there are more in the system 80 port

[[email protected] varnish]# netstat  -ant  | grep :80
tcp        0      0 0.0.0.0:80                  0.0.0.0:*                   LISTEN      
tcp        1      1 192.168.1.130:34104         103.245.222.133:80          LAST_ACK    
tcp        1      0 192.168.1.130:59686         140.207.194.83:80           CLOSE_WAIT  
tcp        0      0 :::80                       :::*                        LISTEN      
[[email protected] varnish]# 

Copy

Use the browser again to access http://192.168.100.101/ or http://127.0.0.1/ You can get www.boohee.com The content of the home page of

---

Other configuration options can be explained in the comments

Item	Explain
-a	Specify listening IP And port , The default is 0.0.0.0:6081
-f	Designated master VCL The configuration file
-T	Remote management port and address , The default is 127.0.0.1:6082
-p	Setting thread parameters , Maximum and minimum decimal ,timeout value
-u	worker Work status
-g	worker Working group
-S	Managed authentication password file
-s	Storage size

/etc/sysconfig/varnish In profile , Set the parameters above , Reference is made below , You can also comment out the original , Use your own configuration