How does the industrial switch enter the web management interface?

Recently, many customers have come to ask Xiaobian , Why can't I go to the industrial switch web Management interface , Regarding this , Xiaobian has also done some answers . 

1、 Confirm whether the industrial switch is managed by intelligent belt , Industrial switches without management are naturally inaccessible .

2、 Confirmed the model with management , Then it is necessary to determine the management IP Is the address correct , We GAONET Gaonaite's industrial switch management IP The factory default is 10.10.10.1.

If it is manually modified IP Address , Please use the modified IP Log in to the industrial switch . If you forget after manual modification , Then please perform the factory recovery operation , hold IP Return to the default 10.10.10.1, Or connect the serial port to enter the command background of the industrial switch , View management IP Information ( For specific operation, we have sent the operation manual before , You can operate according to the manual ).

3 Confirm Industrial Switch Management IP, Then use Ping command ,ping Management of industrial switches IP, If you can ping through , You can go in under normal circumstances web Interface .

If you can't get in , There may be several reasons ： firstly ,IP Address conflict , Management of industrial switches IP And other devices IP repeated . In this case, temporarily disconnect the industrial switch from other equipment , clear ARP, Reenter . Exclude IP The possibility of conflict , can ping Communication management IP, But I can't get in web management , At this time, please clean up the browser cache , Also clean up ARP, Close the browser after cleaning up the browser cache , Then open the browser , Input management IP.