Sharing of precautions for the construction of dioxin laboratory in Meizhou

What are the construction contents of Meizhou dioxin laboratory worth paying attention to ？SICOLAB From this article, I will talk about the construction issues

One 、 Dioxin laboratory construction ： test method

1. Analytical methods of chemical instruments

HRGC/HRMS

GC/HRMS

HRGC/LRMS

2. Biological detection methods

RROD Cell culture method

Luciferase method

EIA Enzyme immunoassay

DELFIA Fluorescence immunoassay

Two 、 Two evil British laboratory Building form 、 function

The building area of dioxin analysis laboratory shall be at least 500 m2, The use area is about 350 m2. There should be a changing room in the laboratory 、 Sample storage room 、 Sampling equipment room 、 Balance Room 、 Low concentration sample processing room 、 High concentration sample processing room 、 Instrumental Analysis Laboratory 、 Data analysis room 、 Buffer room 、 Waste storage room and corridor, etc .

3、 ... and 、 Two evil British laboratory Building ： Determine reasonable process flow

Communicate with laboratory operators , Determine a reasonable process flow diagram , This process is required to monitor dioxin 、 Analysis is best for , Protect the safe operation of laboratory personnel .

Four 、 Two evil British laboratory Building ： Determine laboratory equipment and test bench 、 ark

Communicate with laboratory operators , Determine the placement of instruments and equipment in different functional rooms and customize special laboratory furniture .

5、 ... and 、 Identify clean and non clean areas and auxiliary function rooms

Identify clean areas and clean areas , The reasonable cleanliness of each functional area can be determined . At the same time, in the clean area, we should design a comprehensive differential pressure gradient , To prevent aerosol from penetrating between different functional areas , Ensure the safety of the experimental operators . Pay attention to the following points :

1. The design of clean air conditioning conforms to the design specification of clean workshop ;

2. Determine the pressure difference between different functional areas ;

3. Confirm the flow of people 、 Logistics channel , The entrance is required to strictly implement the flow of people 、 Logistics separation : And require the shortest material transmission line .

6、 ... and 、 Two evil British laboratory Building ： Management requirements for laboratory personnel setup

The personnel arrangement of dioxin laboratory shall at least include the general principal 、 Technical director 、 Testers 、 Instrument and equipment management personnel 、 Electromechanical equipment maintenance and management personnel 、 Laboratory safety officer, etc . Responsible for laboratory management respectively 、 Quality supervision 、 On site sampling 、 Before processing 、 Instrumental analysis and laboratory auxiliary system ( ventilation 、 electrical 、 Water supply and drainage 、 Data transmission, etc ) Operation and maintenance 、 Sample and material management , The specific functions are as follows :

1. General manager , Familiar with dioxin analysis techniques , A person with laboratory management experience shall serve as . Be responsible for the overall management of dioxin laboratory .

2. Technical director , Based on the analysis technology and rich experience of environmental media dioxin , Personnel who are familiar with the dioxin analysis and testing workflow shall serve as . Responsible for technical guidance to the business of testers , Review and confirm the test records of testers ; Responsible for quality assurance and quality control during the whole process of dioxin analysis and testing in environmental media , Be responsible for formulating capability verification plan and organizing its implementation .

3. Testers , Samples of dioxin from environmental media 、 Before processing 、 Purification and analysis test technology principle and practical operation training , Familiar with standard operating procedures (SOP) And the personnel who have passed the examination shall serve as .

4. Instrument and equipment administrator , Familiar with the principle of instruments and equipment , Responsible for the preparation of laboratory equipment maintenance plan , Preparation, specification, use and daily maintenance of instrument and equipment operation procedures ; Collect and sort out relevant technical data of instruments and equipment , Do a good job in the registration and recording of instrument and equipment accounts .

5. Electromechanical equipment maintenance and management personnel , Be responsible for the maintenance of HVAC system , Guarantee the laboratory temperature 、 The pressure and humidity meet the requirements .

6. Laboratory safety officer , Be responsible for laboratory safety and sanitation of relevant experimental areas . When the laboratory is abnormal , First, inform the general manager of the situation , And take appropriate external management measures .

SICOLAB Focus on the basic design and construction process of multi field laboratory