Samba server configuration

One 、Samba brief introduction

Samba Can achieve Linux Between systems And Linux and Windows Between systems Of File and print sharing .

1、SMB agreement

SMB The communication protocol can be regarded as a local area network Share files and printers An agreement of .

2、Samba Software

Two background Daemons ------nmbd and smbd.
nmbd monitor 137 and 138UDP port ,smbd monitor 139TCP port .
nmbd and smbd All the configuration information used is saved in /etc/samba/smb.conf In file .

Two 、 To configure Samba service

1、 install 、 start-up Samba service

Check whether the system is installed Samba Dependency packages
rpm -qa|grep samba
（1） Use yum Command to install Samba service
yum clean all // Clear the cache before installing
yum install samba -y
（2） Use rpm Command to query again
rpm -qa|grep samba
Query results ：6 individual
（3） Start and stop Samba service , Set boot up
systemctl start smb
systemctl enable smb
systemctl restart smb
systemctl stop smb
systemctl start smb
Be careful ： After changing the configuration file , Be sure to restart the service , Let the new configuration take effect