[operation tutorial] how to correctly use the Hikvision demo tool to configure the channel to go online?

EasyCVR The platform has strong expansibility 、 Deployment is light 、 Flexible video capabilities , The mainstream standard protocols that can be supported are GB28181、RTSP/Onvif、RTMP etc. , And the manufacturer's private agreement and SDK Access , Including Haikang Ehome、 The sea, SDK、 Dahua SDK etc. , Can be distributed externally RTSP、RTMP、FLV、HLS、WebRTC Video streams of the same format .

Some users use Haikang's DS-A80624S Storage server access device , adopt HIKSDK The protocol connects the device to EasyCVR Platform time , The number of channels found is 0. We passed Haikang during the investigation demo Tools enter the equipment , The view discovery channel is displayed as ×, It is speculated that the user may operate incorrectly, resulting in the above problems . Today we share with you how to correctly use Haikang's demo The tool configures the channel and brings it online .

1） stay demo Select... At the top of the interface “ To configure ” modular , Select... On the right side of the interface “IP Access configuration ” ;

2） stay IP Equipment access management interface , Select the current collection type as “ Equipment fetching ” ;

3） In the list box , Select a channel such as IPCamera07, stay “ Add channel information ” Box IP Such as 10***、 user name 、 password 、 port 8000、 Channel number such as 9 Information, etc. ;

4） Click add in turn -> preservation -> Refresh , You can see that the channel status is changed from “ Unavailable ” Turn into “ On-line ”, This indicates that the channel was added successfully , This can also be done at EasyCVR View the channel information on the page .

notes ： In the list box , Select the online channel , It can be modified and deleted . Each time you add a channel 、 modify 、 After deleting the operation , Click save and refresh .

5） Add a screenshot of the operation as follows ：

As shown in the figure , Click on “ Refresh ”, Can get IPC Encoder information , You can select a group number 0~15 Display , Group display 64 individual , A total of 16x64=1024 An encoder , That is, the encoder name on the interface must be 1~1024 The pure number between can be in demo It shows that , Added IPC The following is displayed in the equipment tree view ：

When the configuration is complete , Can be in demo You can see that the device is online , stay EasyCVR In the platform , adopt HIKSDK Access Agreement , At this time, the channel is normally online .

EasyCVR The video fusion cloud service platform has rich and flexible video capabilities , Video transcoding can be realized 、 Play 、 videotape 、 Look back 、 Cloud storage 、 Cascade and other capabilities , It is widely used in offline scenes , Such as smart construction site 、 Smart campus 、 Smart community 、 Intelligent buildings, etc .

With AI The wide application of intelligent analysis technology , We also actively research and develop the integration of relevant technologies and video services . Recently, we released based on AI Of intelligent analysis technology EasyCVR platform + edge AI Intelligent supervision solution for safe production of hardware , The functions that can be realized include helmet detection 、 Protective clothing testing 、 Pyrotechnic detection 、 Indoor channel blockage detection 、 Sleep and leave detection, etc .