Precautions for installation and use of rotary joint

In order to prolong the service life of the rotary joint , Ensure production safety , that , Let's learn and summarize the precautions for the installation and use of the rotary joint !

1 . Before installation of mofuron technology rotary joint, be careful not to mix foreign matters into the sealing surface .

2 . When fitting joints with inspection holes , Make sure that the inspection hole is facing down .

3 . Do not install heavy objects such as valves on the rotary joint .

4 . During thread installation , The thread direction shall be easy to fasten relative to the rotation direction . From the installation direction of the rotary joint , Roller 、 The rotation direction of the roller, etc. is “ Clockwise is left-hand thread , It is a right-hand thread in the counterclockwise direction ”.

5 . Flexible pipe shall be used for connection between rotary joint and piping department . Please avoid using steel pipes to directly install piping , And constrain the joint .

6 . Anti rotation of rotary joint , Only perform anti rotation of the joint , Do not impose other constraints .

7 . At maximum service pressure , Please avoid using the maximum speed .

8 . When used at high temperature , When using ball bearings , It needs to be filled with grease , Over a certain period of time ( Depending on the frequency of use ) when , Please be sure to refuel .

9 . When adding grease , Please remove the plug for filling .

10 . Do not place it for a long time when it is stopped . Otherwise, it may rust , Cause fluid leakage .

11 . When the fluid leaks from the inspection hole , The connector with inspection hole enters the replacement period

12 . In case of failure , Please repair or replace the new product in time . Do not continue operation in case of fluid leakage , Can lead to major accidents .

We hope that our customers can install and use the rotary joint according to the precautions for installation and use , It can prolong the service life of the rotary joint , Improve economic efficiency , Ensure safe production .