Water quality integration for Home Assistant with data provided by Budapest FVM

Related tags

Hardwarehome-assistantbudapesthomeassistanthungaryhomeassistant-sensorhomeassistant-integrationhomeassistant-custom-component
Overview

hacs_badge

Buy me a coffee

Water Quality FVM (Budapest, HU) custom integration for Home Assistant

This custom component integrates water quality information provided by Budapest Water Company (FVM - Fővárosi Vízművek).

The state of the sensor will be the number of monitored items above their threshold. Thresholds are defined on the FVM vízminőség, vízkeménység page (see below).

Water hardness value is listed with other monitored elements, while the human readable water hardness string is listed as a standalone attribute.

Installation

The easiest way to install it is through HACS (Home Assistant Community Store), search for Water Quality FVM in the Integrations.

Configuration:

Define sensor with the following configuration parameters:

Name Optional Default Description
name Y water_quality_fvm name of the sensor
region Y Budapest - I. kerület region string (see below)

Region should match the location specified at FVM vízminőség, keménység.

Example of water quality information:

Water quality attributes

Example

platform: water_quality_fvm
region: 'Budapest - XXII. kerület'

Thanks

Thanks to all the people who have contributed!

contributors

You might also like...
Sleep As Android integration for Home Assistant
Sleep As Android integration for Home Assistant

Sleep As Android custom integration This integration will allow you to get events from your SleepAsAndroid application in a form of the sensor states

Igor 84 Dec 30, 2022
Skykettle ha - Redmond SkyKettle integration for Home Assistant
Skykettle ha - Redmond SkyKettle integration for Home Assistant

Redmond SkyKettle integration for Home Assistant This integration allows to cont

Alexey 'Cluster' Avdyukhin 48 Jan 6, 2023
Ha-rpi gpio - Home Assistant Raspberry Pi GPIO Integration

Home Assistant Raspberry Pi GPIO custom integration This is a spin-off from the

Shay Levy 98 Dec 24, 2022
Resmed_myair_sensors - This is a Home Assistant custom component to pull daily CPAP data from ResMed's myAir service using an undocumented API

resmed_myair This component will set up the following platforms. Platform Description sensor Show info from the myAir API. Installation Using the tool

Preston Tamkin 17 Dec 29, 2022
Historic weather - Home Assistant custom component for accessing historic weather data

Historic Weather for Home Assistant (CC) 2022 by Andreas Frisch [email protected].

Andreas Frisch 1 Jan 10, 2022
Volkswagen ID component for Home Assistant

Volkswagen ID component for Home Assistant This folder contains both a generic Python 3 library for the Volkswagen ID API and a component for Home Ass

null 55 Jan 7, 2023
Sensor of Temperature Feels Like for Home Assistant.

Please ⭐ this repo if you find it useful Sensor of Temperature Feels Like for Home Assistant Installation Install from HACS (recommended) Have HACS in

Andrey 60 Dec 25, 2022
Интеграция Home Assistant с ЛК
Интеграция Home Assistant с ЛК "Интер РАО"

ЕЛК ЖКХ «Интер РАО» для Home Assistant Предоставление информации о текущем состоянии ваших аккаунтов в ЕЛК ЖКХ. Введение @ TODO @ Установка Посредство

Alexander Ryazanov 27 Nov 5, 2022
Provide Unifi device info via api to Home Assistant that will give ap sensors
Provide Unifi device info via api to Home Assistant that will give ap sensors

Unifi AP Device info Provide Unifi device info via api to Home Assistant that will give ap sensors

null 12 Jan 7, 2023
Comments
  • How to add all values to HA?

    How to add all values to HA?

    Hi! First of all thank you for this custom component. I have set it up in my HA and it extracts the data for my region (Budaörs). How can I add all these sensor values easily to my HA? If I add the sensor to an entity or sensor card it shows only one value.

    Can you post a template which extracts all the values nicely in a card? Eventually can I have the values color sensitive depending on their status: below/above or inside/outside limits?

    Thank you for your support.

    opened by KixMan28 8
  • Sensor disappeared

    Sensor disappeared

    Hello amaximus,

    just realized that the sensor of the water quality is gone missing. Maybe because the site https://www.vizmuvek.hu/hu/fovarosi-vizmuvek/lakossagi-ugyfelek/altalanos_informaciok/vizminoseg_vizkemenyseg has a 404 Error? Could you look into that if you have the time?

    Thank you!!!

    bug 
    opened by zbeez 4
Owner
Atticus Maximus
[email protected]
Atticus Maximus
GitHub Repository
Shotgrid Toolkit Engine for Gaffer

Shotgun toolkit engine for Gaffer Contact : Diego Garcia Huerta Overview Implementation of a shotgun engine for Gaffer. It supports the classic bootst

Diego Garcia Huerta 12 May 21, 2022
Historic weather - Home Assistant custom component for accessing historic weather data

Historic Weather for Home Assistant (CC) 2022 by Andreas Frisch [email protected]

Andreas Frisch 1 Jan 10, 2022
Christmasvillage-rpi - Raspberry Pi relay controller for ChristmasVillage.io

ChristmasVillage.io Relay Controller Links ChristmasVillage.io - Live Stream & Controls Youtube Instagram About This repository controls the light rel

Grant Windes 2 Feb 15, 2022
CircuitPython Driver for Adafruit 24LC32 I2C EEPROM Breakout 32Kbit / 4 KB

Introduction CircuitPython driver for Adafruit 24LC32 I2C EEPROM Breakout Dependencies This driver depends on: Adafruit CircuitPython Bus Device Regis

foamyguy 0 Dec 20, 2021
Hook and simulate global mouse events in pure Python

mouse Take full control of your mouse with this small Python library. Hook global events, register hotkeys, simulate mouse movement and clicks, and mu

BoppreH 722 Dec 31, 2022
Alternative firmware for ESP8266 with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Full documentation at

Alternative firmware for ESP8266/ESP32 based devices with easy configuration using webUI, OTA updates, automation using timers or rules, expandability

Theo Arends 59 Dec 26, 2022
Vvim - Keyboardless Vim interactions

This is done via a hardware glove that the user wears. The glove detects the finger's positions and translates them into key presses. It's currently a work in progress.

Boyd Kane 8 Nov 17, 2022
Extremely simple PyBadge examples to demonstrate different aspects of CircuitPython using PyBadge hardware.

BeginnerPyBadge I purchased a PyBadge recently. I'm new to hardware. I was surprised how hard it was to find easy examples demonstrating how different

Rubini LaForest 2 Oct 21, 2021
Home Assistant custom integration for e-distribución

e-Distribución is an energy distribution company that covers most of South Spain area. If you live in this area, you probably are able to register into their website to get some information about you

VMG 17 Sep 07, 2022
Home-Assistant MQTT bridge for Panasonic Comfort Cloud

Panasonic Comfort Cloud MQTT Bridge Home-Assistant MQTT bridge for Panasonic Comfort Cloud. Note: Currently this brige is a one evening prototype proj

Santtu Järvi 2 Jan 04, 2023
Transform a Raspberry Pi into a network diagnostic machine.

EtherView Last updated jan 30, 2022. Welcome to the EtherView project! This is a project to transform a RaspberryPi into a portable network diagnostic

1 Jan 30, 2022
A script and GUI for controlling stepper motors from an arduino

A script and GUI for controlling stepper motors from an arduino (nema 23 in my case but should work for others in general)

Pip 2 Aug 01, 2022
A ch341dll Wrap is for using in Python 32bits windows to access I2C SPI and MDIO (by GPIO), and Demo with display PC sreen on OLED by i2c or SPI .

ch341dll_wrap_typcal_app A ch341dll Wrap is for using in Python 32bits windows to access I2C SPI and MDIO (by GPIO). In addition, I provided 3 Demo. I

13 Jan 02, 2023
emhass: Energy Management for Home Assistant

emhass EMHASS: Energy Management for Home Assistant Context This module was conceived as an energy management optimization tool for residential electr

David 70 Dec 24, 2022
A Raspberry Pi Pico plant sensor hub coded in Micropython

plantsensor A Raspberry Pi Pico plant sensor hub coded in Micropython I used: 1x Raspberry Pi Pico - microcontroller 1x Waveshare Pico OLED 1.3 - scre

78 Sep 20, 2022
Python script for printing to the Hanshow price-tag

This repository contains Python code for talking to the ATC_TLSR_Paper open-source firmware for the Hanshow e-paper pricetag. Installation # Clone the

12 Oct 06, 2022
A module for cross-platform control of the mouse and keyboard in python that is simple to install and use.

PyUserInput PyUserInput is a group project so we've moved the project over to a group organization: https://github.com/PyUserInput/PyUserInput . That

Paul Barton 1k Dec 27, 2022
A simple Python script for toggling Philips Hue Lights by clapping

LightsClap A simple Python script for toggling Philips Hue Lights by clapping Usage pip3 install -r requirements.txt python3 main.py and press the Ent

Flux Industries 2 Nov 16, 2021
Pihole-eink-display - A simple Python script to display PiHole statistics on an eInk Display

Pihole-eink-display - A simple Python script to display PiHole statistics on an eInk Display

Mark McIntyre 64 Oct 11, 2022
Small Robot, with LIDAR and DepthCamera. Using ROS for Maping and Navigation

🤖 RoboCop 🤖 Small Robot, with LIDAR and DepthCamera. Using ROS for Maping and Navigation Made by Clemente Donoso, 📍 Chile 🇨🇱 RoboCop Lateral Fron

Clemente Donoso Krauss 2 Jan 04, 2022