Deis v1, the CoreOS and Docker PaaS: Your PaaS. Your Rules.

Last update: Jan 04, 2023

Overview

	This repository (`deis/deis`) is no longer developed or maintained. The Deis v1 PaaS based on CoreOS Container Linux and Fleet has been replaced by Deis Workflow which is based on Kubernetes.

Deis v1 PaaS

Deis (pronounced DAY-iss) is an open source PaaS that makes it easy to deploy and manage applications on your own servers. Deis builds upon Docker and CoreOS to provide a lightweight PaaS with a Heroku-inspired workflow.

New to Deis? Learn more about Deis Concepts, Architecture and how to Deploy an Application.

Installing Deis v1

Deis is a set of Docker containers that can be deployed anywhere including public cloud, private cloud, bare metal or your workstation. Decide where you'd like to deploy Deis, then follow the provider-specific documentation for provisioning.

Trying out Deis? Please follow the documentation on getting set up with Vagrant. Upgrading from a previous Deis release? See Upgrading Deis for additional information.

Troubleshooting

See the Troubleshooting Deis documentation for assistance with common issues.

Contributing

Interested in contributing to Deis? Check out our Open Roadmap and Planning Process or jump right into hacking on Deis and testing your Deis cluster.

License

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Comments

deis router requests hang after about an hour

Slightly different from a recently reported error.

After about an hour, all connections to Deis' router hang in v1.5.0. Once I restart each router, everything goes back to working fine...

$ curl -v http://172.17.100.29/health-check
* About to connect() to 172.17.100.29 port 80 (#0)
*   Trying 172.17.100.29...
* Adding handle: conn: 0x7fa212000000
* Adding handle: send: 0
* Adding handle: recv: 0
* Curl_addHandleToPipeline: length: 1
* - Conn 0 (0x7fa212000000) send_pipe: 1, recv_pipe: 0
* Connected to 172.17.100.29 (172.17.100.29) port 80 (#0)
> GET /health-check HTTP/1.1
> User-Agent: curl/7.30.0
> Host: 172.17.100.29
> Accept: */*
>
^C (more than 30s hang, so interrupted)

$ deisctl restart [email protected] && deisctl restart [email protected] && deisctl restart [email protected]
- [email protected]: inactive/dead
- [email protected]: active/running
- [email protected]: inactive/dead
- [email protected]: active/running
- [email protected]: inactive/dead
- [email protected]: active/running

$ curl -v http://172.17.100.29/health-check
* About to connect() to 172.17.100.29 port 80 (#0)
*   Trying 172.17.100.29...
* Adding handle: conn: 0x7ff96480aa00
* Adding handle: send: 0
* Adding handle: recv: 0
* Curl_addHandleToPipeline: length: 1
* - Conn 0 (0x7ff96480aa00) send_pipe: 1, recv_pipe: 0
* Connected to 172.17.100.29 (172.17.100.29) port 80 (#0)
> GET /health-check HTTP/1.1
> User-Agent: curl/7.30.0
> Host: 172.17.100.29
> Accept: */*
>
< HTTP/1.1 200 OK
* Server nginx/1.7.10 is not blacklisted
< Server: nginx/1.7.10
< Date: Fri, 10 Apr 2015 01:46:58 GMT
< Content-Type: text/plain
< Content-Length: 0
< Connection: keep-alive
<
* Connection #0 to host 172.17.100.29 left intact

Nothing out of the ordinary in the global journalctl, or the router logs.

Going to try and revert the routers to v1.4.1 and see if it is a CoreOS issue or a v1.5.0 issue.

router

opened by azurewraith 109

Make store component optional by allowing external database, registry, and log collector
Related to #2252 and #2295.

It seems to me like the store and Ceph add a lot of complexity to the Deis cluster. The store component is obviously useful, maybe necessary for applications that require everything to be self-contained in the cluster. However, for someone like me with little Devops experience, it would be nice to have the option to offload some of this complexity to other services that require little or no management on my part.

For example, from an AWS perspective I could ideally replace the database component with RDS, remove the logger component and have the logspouts post logs to a service like Loggly or Papertrail, and have the the registry use S3 as storage. If I'm correct, then no components would rely on the store and deis-store-daemon, deis-store-gateway, deis-store-metdata, and deis-store-monitor could all be removed from the cluster.

Some benefits that I could see from my perspective:

No need for Ceph experience to debug issues with the store. (I took down a node in the cluster without fully removing it from Ceph, and managed to leave my cluster in an unrecoverable state.)

Nodes are stateless - which make it much easier to scale down the cluster. No need to go through the process of tearing-down Ceph - just shut down the server.

Core components use less of the cluster's resources.

This could potentially make upgrading the Deis platform easier as well, but I'm not sure.

I just wanted to throw out this idea to see what the potential downsides are for this strategy, and what the Deis team's opinion is on supporting something like this.
all-components open-roadmap
opened by mgartner 94
/home/git/project.git/hooks/pre-receive: No such file or directory
Uh. I tried to push a new version to Deis. Mid-push my computer shut down, and when I returned I could not push again because a push was in progress.

I read in the issue tracker that you could a) delete the lock file or b) restart the builder. I didn't find any lockfile, so I restarted the builder.

Now it seems like nothing works.

I get this error when pushing

onbjerg at AIR in ~/Projects/wallz on develop $ git push deis develop:master /usr/local/bin/gitreceive: line 33: /home/git/wallz.git/hooks/pre-receive: No such file or directory fatal: Could not read from remote repository. Please make sure you have the correct access rights and the repository exists.```
bug builder production-team
opened by onbjerg 64
Use Real CoreOS on DigitalOcean
Note: this won't work. DigitalOceans CoreOS is too new for current deis version...

Howto Test Provisioning:

edit contrib/coreos/user-data as usual to include your new discovery URL

gem install docl

cd contrib/digitalocean

Create a personal Access Token on DO (https://cloud.digitalocean.com/settings/applications)

Copy the token a new file to do-access-token (in contrib/digitalocean)

exectue ./provision-do-cluster.sh lon1 230790 2GB Replace the middle value with your SSH ID The first value is identifier for the region (valid values are sfo1 lon1 ny3). Last value is the size identifier in the form of NGB (eg 8GB which used to be the default)

Wait & look for the IP on the DO website in your droplet list

ssh core@$PUBLICIP

This show show welcome to DEIS $ `fleetctl list-machines Should list the 3 machines provided (or more if you modified DEIS_NUM_INSTANCES)

TDOO:

[x] Update Documentation

[x] Update DEIS itself so it works with this newer version of CoreOS

[x] Squash commits

[x] Show progress for creating the Droplets

[x] Handle errors in creating the droplets

[x] Decide if we want users to install 2 depencencies (barge DO Library, and tugboat command line), or convert everything to barge (meaning scripts for all possible actions need to be written).

Earlier TODO

[ ] Start using the Beta channel as soon as possible. Apparantly we rely on the alpha channel for all other providers as well, so this todo is discarded now
opened by nathansamson 58
feat(platform): support placement options for each plane and router mesh

Addresses #3023

Documentation to follow if the approach is satisfactory.

This updates units (and code that generates units) such that Deis platform components belonging to the control plane can be scheduled only where machine metadata includes controlPlane=true. Similarly, data plane components (including applications) can be scheduled only where machine metadata includes dataPlane=true and router mesh components can be scheduled only whrere machine metadata includes routerMesh=true.

user-data.example is modified such that machines configured from that cloud-config are eligible to host both planes and the router mesh. This permits small clusters composed entirely of general purpose nodes to be constructed as easily as ever before and permits the platform to be installed to such a cluster without complication, but it additionally creates the the ability for advanced operators using custom cloud-config to easily partition the nodes of a larger cluster by role without needing to modify/customize unit files. This is especially useful for anyone wishing to implement CoreOS' own recommended large / production-worthy cluster architecture documented here:

https://coreos.com/docs/cluster-management/setup/cluster-architectures/#production-cluster-with-central-services

~~BREAKING CHANGE: Requires that all machines hosting Deis components be assigned one or more of controlPlane=true, dataPlane=true, or routerMesh=true via cloud-config. This represents a breaking change for anyone upgrading an existing clutser.~~
requires-manual-testing deisctl contrib and provisioning Code LGTM1 Code LGTM2

opened by krancour 57

store-volume fails after update to v0.15.0

Following the upgrade instructions didn't work for me on 3-node vagrant.

$ git checkout v0.14.1
$ make -C deisctl/ build
$ deisctl --version
0.14.1
$ deisctl refresh-units
$ deisctl config platform set domain=local3.deisapp.com
$ deisctl install platform
$ deisctl start platform
$ deisctl uninstall platform
$ git checkout v0.15.0
$ make -C deisctl/ build
$ deisctl --version
0.15.0
$ deisctl refresh-units
$ deisctl config platform set version=v0.15.0
$ deisctl install platform
$ deisctl start platform
● ▴ ■
■ ● ▴ Starting Deis...
▴ ■ ●

Storage subsystem...
deis-store-monitor.service: activating/start-pre                                 
deis-store-monitor.service: active/running                                 
deis-store-daemon.service: activating/start-pre                                 
deis-store-daemon.service: active/running                                 
deis-store-metadata.service: activating/start-pre                                 
deis-store-metadata.service: active/running                                 
deis-store-volume.service: activating/start-pre                                 
deis-store-gateway.service: activating/start-pre                                 
deis-store-gateway.service: active/running                                 
deis-store-volume.service: activating/auto-restart                                 
deis-store-volume.service: activating/start-pre                                 
deis-store-volume.service: activating/auto-restart                                 
deis-store-volume.service: activating/start-pre                                 
deis-store-volume.service: activating/auto-restart                                 
deis-store-volume.service: activating/start-pre                                 
deis-store-volume.service: activating/auto-restart                                 
deis-store-volume.service: activating/start-pre 
...

bug

opened by mboersma 52

feat(controller): Adding LDAP/AD auth support

This is the Pull Request for the Proposal that we discussed at #3135 using the PoC in the gist.

I didn't write any test because I imagine that it's not good have specific tests for auth with ldap, so my opinion is that if the actual auth tests pass its good enough.

If sounds good I will make a doc with the README content and create another PR.
enhancement controller

opened by phspagiari 51

getting an error during scaling for 2nd app

getting the below from 'docker logs controller':

2014-07-24 15:50:58 [98] [DEBUG] POST /api/apps/engine/scale
ERROR Internal Server Error: /api/apps/engine/scale
Traceback (most recent call last):
  File "/usr/local/lib/python2.7/dist-packages/django/core/handlers/base.py", line 112, in get_response
    response = wrapped_callback(request, *callback_args, **callback_kwargs)
  File "/usr/local/lib/python2.7/dist-packages/rest_framework/viewsets.py", line 78, in view
    return self.dispatch(request, *args, **kwargs)
  File "/usr/local/lib/python2.7/dist-packages/django/views/decorators/csrf.py", line 57, in wrapped_view
    return view_func(*args, **kwargs)
  File "/usr/local/lib/python2.7/dist-packages/rest_framework/views.py", line 400, in dispatch
    response = self.handle_exception(exc)
  File "/usr/local/lib/python2.7/dist-packages/rest_framework/views.py", line 397, in dispatch
    response = handler(request, *args, **kwargs)
  File "/app/api/views.py", line 290, in scale
    app.scale()
  File "/app/api/models.py", line 211, in scale
    group(*subtasks).apply_async().join()
  File "/usr/local/lib/python2.7/dist-packages/celery/canvas.py", line 486, in apply_async
    add_to_parent=add_to_parent)
  File "/usr/local/lib/python2.7/dist-packages/celery/app/task.py", line 420, in __call__
    return self.run(*args, **kwargs)
  File "/usr/local/lib/python2.7/dist-packages/celery/app/builtins.py", line 165, in run
    add_to_parent=False) for stask in taskit]
  File "/usr/local/lib/python2.7/dist-packages/celery/canvas.py", line 241, in apply_async
    return _apply(args, kwargs, **options)
  File "/usr/local/lib/python2.7/dist-packages/celery/app/task.py", line 555, in apply_async
    **dict(self._get_exec_options(), **options)
  File "/usr/local/lib/python2.7/dist-packages/celery/app/base.py", line 351, in send_task
    reply_to=reply_to or self.oid, **options
  File "/usr/local/lib/python2.7/dist-packages/celery/app/amqp.py", line 305, in publish_task
    **kwargs
  File "/usr/local/lib/python2.7/dist-packages/kombu/messaging.py", line 168, in publish
    routing_key, mandatory, immediate, exchange, declare)
  File "/usr/local/lib/python2.7/dist-packages/kombu/connection.py", line 457, in _ensured
    interval_max)
  File "/usr/local/lib/python2.7/dist-packages/kombu/connection.py", line 369, in ensure_connection
    interval_start, interval_step, interval_max, callback)
  File "/usr/local/lib/python2.7/dist-packages/kombu/utils/__init__.py", line 243, in retry_over_time
    return fun(*args, **kwargs)
  File "/usr/local/lib/python2.7/dist-packages/kombu/connection.py", line 237, in connect
    return self.connection
  File "/usr/local/lib/python2.7/dist-packages/kombu/connection.py", line 741, in connection
    self._connection = self._establish_connection()
  File "/usr/local/lib/python2.7/dist-packages/kombu/connection.py", line 696, in _establish_connection
    conn = self.transport.establish_connection()
  File "/usr/local/lib/python2.7/dist-packages/kombu/transport/virtual/__init__.py", line 809, in establish_connection
    self._avail_channels.append(self.create_channel(self))
  File "/usr/local/lib/python2.7/dist-packages/kombu/transport/virtual/__init__.py", line 791, in create_channel
    channel = self.Channel(connection)
  File "/usr/local/lib/python2.7/dist-packages/kombu/transport/redis.py", line 440, in __init__
    self.client.info()
  File "/usr/local/lib/python2.7/dist-packages/redis/client.py", line 547, in info
    return self.execute_command('INFO')
  File "/usr/local/lib/python2.7/dist-packages/redis/client.py", line 464, in execute_command
    connection.send_command(*args)
  File "/usr/local/lib/python2.7/dist-packages/redis/connection.py", line 334, in send_command
    self.send_packed_command(self.pack_command(*args))
  File "/usr/local/lib/python2.7/dist-packages/redis/connection.py", line 316, in send_packed_command
    self.connect()
  File "/usr/local/lib/python2.7/dist-packages/redis/connection.py", line 253, in connect
    raise ConnectionError(self._error_message(e))
ConnectionError: Error 111 connecting 172.31.47.113:6379. Connection refused.
2014-07-24 15:51:37 [98] [DEBUG] POST /api/apps/engine/scale
ERROR Internal Server Error: /api/apps/engine/scale
Traceback (most recent call last):
  File "/usr/local/lib/python2.7/dist-packages/django/core/handlers/base.py", line 112, in get_response
    response = wrapped_callback(request, *callback_args, **callback_kwargs)
  File "/usr/local/lib/python2.7/dist-packages/rest_framework/viewsets.py", line 78, in view
    return self.dispatch(request, *args, **kwargs)
  File "/usr/local/lib/python2.7/dist-packages/django/views/decorators/csrf.py", line 57, in wrapped_view
    return view_func(*args, **kwargs)
  File "/usr/local/lib/python2.7/dist-packages/rest_framework/views.py", line 400, in dispatch
    response = self.handle_exception(exc)
  File "/usr/local/lib/python2.7/dist-packages/rest_framework/views.py", line 397, in dispatch
    response = handler(request, *args, **kwargs)
  File "/app/api/views.py", line 290, in scale
    app.scale()
  File "/app/api/models.py", line 211, in scale
    group(*subtasks).apply_async().join()
  File "/usr/local/lib/python2.7/dist-packages/celery/canvas.py", line 486, in apply_async
    add_to_parent=add_to_parent)
  File "/usr/local/lib/python2.7/dist-packages/celery/app/task.py", line 420, in __call__
    return self.run(*args, **kwargs)
  File "/usr/local/lib/python2.7/dist-packages/celery/app/builtins.py", line 165, in run
    add_to_parent=False) for stask in taskit]
  File "/usr/local/lib/python2.7/dist-packages/celery/canvas.py", line 241, in apply_async
    return _apply(args, kwargs, **options)
  File "/usr/local/lib/python2.7/dist-packages/celery/app/task.py", line 555, in apply_async
    **dict(self._get_exec_options(), **options)
  File "/usr/local/lib/python2.7/dist-packages/celery/app/base.py", line 351, in send_task
    reply_to=reply_to or self.oid, **options
  File "/usr/local/lib/python2.7/dist-packages/celery/app/amqp.py", line 305, in publish_task
    **kwargs
  File "/usr/local/lib/python2.7/dist-packages/kombu/messaging.py", line 168, in publish
    routing_key, mandatory, immediate, exchange, declare)
  File "/usr/local/lib/python2.7/dist-packages/kombu/connection.py", line 457, in _ensured
    interval_max)
  File "/usr/local/lib/python2.7/dist-packages/kombu/connection.py", line 369, in ensure_connection
    interval_start, interval_step, interval_max, callback)
  File "/usr/local/lib/python2.7/dist-packages/kombu/utils/__init__.py", line 243, in retry_over_time
    return fun(*args, **kwargs)
  File "/usr/local/lib/python2.7/dist-packages/kombu/connection.py", line 237, in connect
    return self.connection
  File "/usr/local/lib/python2.7/dist-packages/kombu/connection.py", line 741, in connection
    self._connection = self._establish_connection()
  File "/usr/local/lib/python2.7/dist-packages/kombu/connection.py", line 696, in _establish_connection
    conn = self.transport.establish_connection()
  File "/usr/local/lib/python2.7/dist-packages/kombu/transport/virtual/__init__.py", line 809, in establish_connection
    self._avail_channels.append(self.create_channel(self))
  File "/usr/local/lib/python2.7/dist-packages/kombu/transport/virtual/__init__.py", line 791, in create_channel
    channel = self.Channel(connection)
  File "/usr/local/lib/python2.7/dist-packages/kombu/transport/redis.py", line 440, in __init__
    self.client.info()
  File "/usr/local/lib/python2.7/dist-packages/redis/client.py", line 547, in info
    return self.execute_command('INFO')
  File "/usr/local/lib/python2.7/dist-packages/redis/client.py", line 464, in execute_command
    connection.send_command(*args)
  File "/usr/local/lib/python2.7/dist-packages/redis/connection.py", line 334, in send_command
    self.send_packed_command(self.pack_command(*args))
  File "/usr/local/lib/python2.7/dist-packages/redis/connection.py", line 316, in send_packed_command
    self.connect()
  File "/usr/local/lib/python2.7/dist-packages/redis/connection.py", line 253, in connect
    raise ConnectionError(self._error_message(e))
ConnectionError: Error 111 connecting 172.31.47.113:6379. Connection refused.

opened by developerinlondon 50

chore(logger): refactor-- also includes new features
Fixes #4000; replaces #4435

TL;DR: A complete rewrite of deis-logger aimed at easier extensibility and maintenance. Some bug fixes and new features are included as well, as are many new unit tests.

Motivations

#4000 called for the implementation of an in-memory ring buffer as an alternative to file-based log storage (which doesn't work out so well for those running stateless / without Ceph).

The possibility that in-memory storage is used as an alternative to file-based storage means deis-controller can no longer mount a volume in common with deis-logger to get logs. deis-logger needed to evolve to serve logs to deis-controller over HTTP.

deis-logger was not originally written to read logs; only to write them.

The implementation offered by the community in #4083 was welcome, but fell short in a few keys areas:

Introduced the concept of a "handler" for storing and reading logs, but clashed with deis-logger's existing notion of what a "handler" is. (Overloaded term.)

Introduced some undesired complexity-- e.g. deis-controller only read logs from deis-logger over HTTP if the in-memory storage option was in use. (deis-controller shouldn't have to know how logs are being stored and shouldn't have to adjust its behavior based on that. Logs could/should always be retrieved from the deis-logger over HTTP.)

Only checked the "handler" type to use at startup; couldn't dynamically reconfigure itself.

Didn't adequately address failure cases.

Despite those few problems, #4083 actually worked great! Big shout out to @rvadim and @aj-may for their efforts on this. Unfortunately, since the implementation was layered on top of existing code that was in rough shape to begin with, this didn't bode well for future maintenance and extension. deis-logger as it stood prior to this PR:

Was based on a library that hasn't been updated in three years.

Had lots of dead, untested, and hard-to-follow code.

Existing support for writing logs to files and draining logs was a hack to begin with.

Only supported UDP-based drains. (TCP needed for use with TLS-- future feature.)

Issues such as #4280 are also considerations that informed the approach.

Weighing the myriad concerns, a scorched earth re-design seemed the way to go.

Design

Here's a brief overview of the design. (I'll see about adding a use case diagram tomorrow to help make this easier for reviewers.)

Logger

main.go handles startup including flag parsing. It supports all the same flags as the old implementation for complete backwards compatibility. It initializes and starts four components:

A syslogish.Server: reads and writes logs. For writing, it implements a loop that receives logs (1 per packet) over UDP. A non-blocking write immediately puts these into an internal queue. This is exactly the same as before. Another loop ranges over the queue and processes log messages. It delegates their storage to an underlying storage.Adapter (file-based or in-memory) and delegates draining to an underlying drain.LogDrain (UDP-based or TCP-based :new:; SSL not supported yet). For reading, reads are also delegated to the underlying storage.Adapter. A key improvement is that storage write failures (rare) and failures to dial the drain (could happen if Papertrail went down, for instance) are handled silently. This sounds bad, but it helps avoid a logging death spiral that happens when the logger can't handle its own error messages. (All other failures that won't start the death spiral are logged, of course.)

A weblog.Server: handles HTTP GET and DELETE requests. Delegates all actual work to the syslogish.Server.

A Configurer: uses a ticker and watches etcd for changes to /deis/logs/storageAdapterType and /deis/logs/drain. When changes are detected, it uses factories that take the values of those keys to construct appropriate storage.Adapter and drain.LogDrain instances, respectively. These are then injected into the syslogish.Server.

A Publisher: uses a ticker and periodically writes the logger's host and port to etcd using the /deis/logs/host and /deis/logs/port, respectively.

Apart from these four primary components, there are also two implementations each of storage.Adapter and drain.LogDrain. These are unit tested rather thoroughly. (Which is the reason this PR is a net addition of lines to the code base.)

One other notable improvement is that complex cleanup logic has been removed. It is not needed AFAICT.

The Fleet unit for deis-logger no longer Requires deis-store-volume, but merely Wants it. This allows it to start up in the absence of Ceph.

Controller

The modifications to deis-controller are more modest. confd is used to look up the deis-logger host now. Combining that with a hard-coded port 8088 permits discovery of the deis-logger component's new weblog.Server. The RESTful interface it exposes allows the controller to read and destroy logs. Failure cases are all accounted for and tests have been added to simulate the failure scenarios and assert that they are handled properly.

The Fleet unit for deis-controller no longer expresses a dependency on deis-store-volume, nor does it mount the volumes from that container on the deis-controller container. (Let's hear it for decoupling.)

deisctl

deisctl has been modified to now install deis-logger with the stateless platform (previously omitted) and to also start that component during stateless platform start or restart.
logger Code LGTM1 Code LGTM2
opened by krancour 49
Design Doc: HTTP Healthcheck on Deploy
refs the new proposal in #4019. All input/feedback on the doc is welcome. refs #3813

Please note that this document is being maintained at https://gist.github.com/bacongobbler/d2f0ef2311d1e3e28997 to keep a living history of any changes made.

During a typical deployment of an application release, the controller performs a status check from Fleet after it has been deployed to ensure that it is running. However, Fleet is a glorified systemd wrapper, which means that it only checks systemd if the process is running (in this case, docker run). If a container's web process takes some time to boot, this may cause a false positive status check from the user's perspective. This proposal introduces a new concept into Deis known as a health check, which will make the controller check Deis' Publisher component for real-time stats on the app to ensure the container is running before recycling the old release.

Goals

The main goals of this proposal is to

ensure a zero-downtime deployment between deployments of new releases

allow the user to configure the URL path, the health check delay, and the health check request timeout value.

Code Changes

In order for this change to occur, there needs to be a way for users to configure both the expected health check URL as well as the initial delay and timeout value of the request. Since the Config object currently exists and the health checks are considered part of an application's configuration, the code changes in the controller is fairly minimal:

deis config:set HEALTHCHECK_URL=/ will configure a health check URL for the application

the expected status code from the health check is a 200 OK. This is non-configurable.

deis config:set HEALTHCHECK_PORT=5432 will configure a health check port for the application (default: 5000)

deis config:set HEALTHCHECK_INITIAL_DELAY=10 will tell Deis' Publisher to wait 10 seconds before performing a health check (default: 0)

deis config:set HEALTHCHECK_TIMEOUT=10 will tell Deis' Publisher that the request may take up to 10 seconds before the app is considered "down" (default: 5).

These keys will be exposed to Etcd at /Deis/config/appname/health check_URL=/ so deis's Publisher can retrieve these values to perform its job.

Once HEALTHCHECK_URL is set, the controller will do the typical application release workflow. However, once the controller is notified by Fleet that the new version of the application is "up", the controller will wait a minimum of x+y seconds, where x is equal to the value of HEALTHCHECK_INITIAL_DELAY, and y is equal to the value of HEALTHCHECK_TIMEOUT. By default this is 5 seconds. Once the waiting is over, the controller will then perform an API request against the Publisher to inspect the container's health (more on that below).

On the Publisher's side, before it publishes a container to Etcd, it will check Etcd for these keys. If health check_URL is set, then it will perform the health check. It will also expose an API which the controller can now ping. The API will be very simple:

Example request:

GET /up

Example Response:

[ "foo_v2.web.1", "foo_v2.web.3", "bar_v3.cmd.1" ]

This response is a list of all containers which Publisher has exposed to Etcd and are considered "up". It will be the responsibility of the controller to parse this response to check if the containers deployed are up based on the container ID. If the health check passes, the rest of the deployment workflow will then continue, recycling old containers and returning a successful response to the client. If only a few are down (few being anything less than all of the new containers), a warning will be raised, but the operation will be considered "passed". However, if health check failed, the controller will respond with an appropriate error and roll back to the old version of the application.

Issues to Note

With this approach, We have some legacy code in the Publisher which will only publish the latest version of the container at any given time (see #2413 for a history lesson). This was put in place to prevent two existing versions of the same app to be published to the router. We'll have to be extra careful not to break this functionality, but we also have to make sure that we're still publishing the older version of the controller to the load balancer (Deis-router) before the new container passes the health check. For example, if the user has set an initial delay that is higher than the TTL of the Etcd keys, this could cause the old version of the containers to come down, causing downtime. This can be mitigated with proper unit tests within Publisher to ensure that an older version of the container is still getting published at this time.

Testing

In order for this proposal to work, we need to ensure a zero-downtime deployment, as well as proper errors to be returned when an application fails to respond in time or with an incorrect status code. Since the controller has a great suite for unit tests, most of the workflow for the client will be covered by unit tests to ensure that the proper errors are propagated when certain cases occur. However, the zero-downtime approach will be covered by a combination of unit tests in Deis-Publisher as well as some comprehensive integration tests. How this will be accomplished is by invoking a goroutine that will continuously ping the app URL. If a 404 response shows up (due to #3774), then the deployment failed as a zero-downtime deployment.
controller
opened by bacongobbler 48
`deis pull` as alternative to `git push` workflow
The new deis pull command is an alternative to the git push workflow that allows promotion of existing Docker images, bit-for-bit, into a Deis application. It pulls the image from your repository and merges it with existing config to create a new release.

Overview of Changes

Refactored logic for creating new releases

Client now uses the git remote for backwards-compat, falling back to the name of the current directory as the app name (this is necessary for git-less deis pull process)

Controller uses a registry-to-registry transfer hack to speed up deis pull by 33%, which can be seen and reviewed at https://github.com/deis/docker-registry/compare/repository-import

How to Test

Test backwards-compat for existing applications

Install a Fresh Cluster from Master

Create a Deis cluster on the master branch

Register a user with deis register

Create a cluster with deis clusters:create

Add keys with deis keys:add

Create an Application

Create an application from a git repository (e.g. example-ruby-sinatra)

Deploy the application using git push

Commit a minor change (git commit --allow-empty) and git push a new v3

Use curl or deis open to test that the app is up

Perform an in-place Upgrade

Uninstall Deis with make uninstall (should retain database data and application units)

Checkout deis-build

Install upgraded Deis with make build run

Use deis login to re-establish a session with the controller

Check Backwards Compatibility

Change directory back into your application

Use deis info and deis open to check the health of the application

Make a minor change (git commit --allow-empty) and use git push deis master to deploy it

Use deis open to confirm it works

Use deis rollback v2 to roll back to an image created on the old code

Use deis open to confirm it works

Create a new application and use git push deis master to ensure the initial build works

Test New Functionality

Create a new directory to hold an application definition: mkdir /tmp/example-go && cd /tmp/example-go

Use deis create to create "example-go"

Use deis pull gabrtv/example-go to deploy from the public Docker Index

Use deis open to confirm the app is working

Use deis config:set POWERED_BY=blah to confirm config layers are set correctly

Use deis rollback v2 to confirm rollback works

Use deis pull registry.bacongobbler.com/helloworld to deploy from an in-house Docker index

Use deis open to confirm the app is working

Use deis run env to verify that the changes to the run command works

requires-manual-testing
opened by gabrtv 44

Releases(v1.13.4)

v1.13.4(Jan 19, 2017)
Note: support for Deis v1 LTS ends on February 13, 2017. Please see Deis Workflow for the next-generation PaaS.

v1.13.3 -> v1.13.4

Fixes

c63ade6 Godeps,deisctl: serialize a unit test and fix a package import

7fd534c models: prune old containers before deploy

49b008c contrib/azure: update template to current API and images

d5d51cd client: do not add top level command to cmdArgs

4ade016 perms: user-only settings file permissions

2381530 database/build.sh: refer to stable pv package location

Documentation

68fb9b4 layout: Update notice with URL for published v2 docs

Maintenance

9b83d00 buildpacks: update several buildpacks

b5a1c38 community: add latest community meeting

e5f349d community: september 2016 community meeting

3ce03a4 router: upgrade nginx to 1.10.1 stable

014ba61 buildpacks: update heroku-buildpack-go to v46

Source code(tar.gz)
Source code(zip)
deis-1.13.4-SHA256SUMS(392 bytes)
deis-cli-1.13.4-darwin-amd64.run(2.32 MB)
deis-cli-1.13.4-linux-amd64.run(1.69 MB)
deisctl-1.13.4-darwin-amd64.run(3.23 MB)
deisctl-1.13.4-linux-amd64.run(2.33 MB)
v1.13.3(Aug 22, 2016)
v1.13.2 -> v1.13.3

Features

d369fd7 contrib: Add script to restart all apps.

ef80d81 client: Sort listings

968c48c router: Add server_tokens option

Fixes

d143b4b logspout: Ignore events with short ID

Documentation

6da7204 dockerfiles: Make Bash requirement explicit in the documentation

Maintenance

e30db13 buildpacks: update go, scala, and php buildpacks

fc1518a (all): update base to alpine:3.4

fd35c66 planning: add July and August, up next, September

3ef983f (all): bump CoreOS to 1068.8.0

167a44a buildpacks: update go, php, nodejs, python, and scala buildpacks

8342efc roadmap: clarify Deis v1 roadmap status

Source code(tar.gz)
Source code(zip)
deis-1.13.3-SHA256SUMS(392 bytes)
deis-cli-1.13.3-darwin-amd64.run(2.32 MB)
deis-cli-1.13.3-linux-amd64.run(1.76 MB)
deisctl-1.13.3-darwin-amd64.run(3.23 MB)
deisctl-1.13.3-linux-amd64.run(2.54 MB)
v1.13.2(Jun 17, 2016)
v1.13.1 -> v1.13.2

Fixes

5888a46 deisctl: replace -c with --cpu-shares

bd827ce Makefile: remove old "go vet" install command

Documentation

62f1696 upgrading: clarify AWS-specific instructions

Maintenance

b795d8d planning: update for june/july community meetings

6ca0414 buildpacks: update heroku-buildpack-scala to v70

1d89269 buildpacks: update heroku-buildpack-php to v105

750e5e9 buildpacks: update heroku-buildpack-go to v41

db9542a Revert (all): bump CoreOS to 1010.5.0

c89e903 (all): bump CoreOS to 1010.5.0

885d7ef buildpacks: update heroku-buildpack-python to v80

955dcea planning: updates for May planning

Source code(tar.gz)
Source code(zip)
v1.13.1(May 6, 2016)
v1.13.0 -> v1.13.1

Fixes

2a4b9ff controller: only load latest config

Maintenance

eb32fb2 buildpacks: update heroku-buildpack-ruby to v146

297f885 buildpacks: update heroku-buildpack-php to v102

b53d38c buildpacks: update heroku-buildpack-nodejs to v90

cfff045 tests: update test-etcd to v2.2.3

8257291 buildpacks: update heroku-buildpack-go to v34

c8957fc (all): bump CoreOS to 899.17.0

705f736 roadmap: update for May planning meeting

fc65359 (all): bump CoreOS to 899.15.0

Source code(tar.gz)
Source code(zip)
deis-1.13.1-SHA256SUMS(392 bytes)
deis-cli-1.13.1-darwin-amd64.run(2.55 MB)
deis-cli-1.13.1-linux-amd64.run(1.76 MB)
deisctl-1.13.1-darwin-amd64.run(3.63 MB)
deisctl-1.13.1-linux-amd64.run(2.54 MB)
v1.13.0(Apr 6, 2016)
Deis v1.13.0 is the final feature release for Deis. It is a Long Term Support (LTS) release, which means we will continue to patch bugs and accept pull requests, however any new features should be applied to Deis Workflow, the successor to Deis.

Deis v1.13.0 bumps CoreOS to 899.13.0, updates the system's containers to Alpine 3.3, removes the scheduler technology previews, bumps the Heroku buildpacks to the latest stable versions, adds a healthcheck url /healthz to the controller, and allows logspout to re-discover the logger when it jumps to another control plane node.

If you are coming from an earlier version of Deis, please read the "Upgrading Deis" documentation for details.

What is Deis?

Deis is an open source PaaS that makes it easy to deploy and manage applications on your own servers. Deis builds upon Docker and CoreOS to provide a lightweight PaaS with a Heroku-inspired workflow.

v1.13.0 Summary

New Features

deis-client responds to deis version, deis -v, deis --version and deis help version

deis-controller now has a health check view at /healthz

There are graceful shutdown scripts for Ceph and Ceph-less nodes. See more here

deis-controller returns a 409 when cancelling a user account that has applications

Improvements

deis-router now makes vhost_traffic_status_zone configurable

deis-logspout now continuously re-discovers the logger's connection information, should it be re-scheduled onto another host

deis-controller prevents overlapping config:set operations

deis-client only deletes ~/.deis/client.json if you're cancelling your own account

deis-controller fixed a bug where single quotes could not be used in an environment variable

deis-builder can be used from within a proxied environment

deis-database exits if it is unable to check for existing backups in Ceph

Linode's provisioning script now allows for cluster expansion

Under the Hood

deis-controller removed all the scheduler technology previews, including Kubernetes, Swarm and Mesos

If you want to test Deis on Kubernetes, please try out the Deis Workflow Beta!

CoreOS was updated to 899.13.0

deis-controller bumped docker-py to 1.7.2

Most components upgraded their Docker base image to Alpine 3.3

All Heroku buildpacks were updated to their current release versions

For more details, please see CHANGELOG.md.

Community Shout-Outs

We want to thank the following Deis community members for creating GitHub issues, providing support to others, and working on various Deis branches:

@ainux4mrvce: Quartz.net

@arkkanoid: Limit max containers per node, deis scale omits environment tags, Set SSL on Application, application migration to another node, Deis builder container removed

@arschles: [Meta] Object Storage Configuration for RC1

@CloudSide: docs(contrib): add link to deis-phppgadmin

@davidcelis: App process died at one point, no longer logs to deis logs

@dhilipsiva: Minor doc updates for GCE

@GautierT: Unable to register to the controller after a successful install

@glenwong: Problem bringing up stateless platform

@iangcarroll: Are repositories meant to be frequently lost?

@jamescw: How to view deis users and/or reset passwords, Use the cluster url as an app url

@jillson: tar command fails inside docker for Java buildpack

@jwaldrip: Broken Deploys, Router does not get updated config of builder on machine change, You cannot attach to a stopped container, start it first

@monaka: CLI doesn't report error on pushing image.

@mooyah: deisctl: Add more keys for access, Deis git push fails

@mrardon: Using heroku-buildpack-php provides no nginx/apache/php logs

@n1rvana: Dockerfile based apps not working for me, Best way to support multiple versions of the same app. (eg: DEV, QA, PROD), Unable to install deis to newly configured Azure cluster

@naphatkrit: git push builder error, nginx 502 on apps that take too long to return HTTP responses, fix(vagrant): fix Vagrantfile to handle spaces

@obmarg: Applications with many web workers frequently fail healthchecks, Config in etcd not rolled back on healthcheck failure., Healthcheck failure on deploy not reported.

@olalonde: Feature request: support for deploying directly from a git remote, Health checks persist after successful deployment, Question: does Deis drain HTTP connections before stopping containers?, [controller] When deleting a user, its apps are deleted from the database but keep running

@omykuji: Deploy an existing app when upgrading

@rosstimson: Support ssh keys larger than 4096 on Workflow (v2)

@rstacruz: Instructions for using graceful-etcd-shutdown, Stateless without logging?, Question: is stateless Deis still supported on v2?, deis-builder "key does not exist" errors, Low disk space, How do we enable graceful-etcd-shutdown?, Docs: document ceph mon remove in removing hosts, Docs: running without ceph issue with store set gateway, docs(Add/Remove hosts): fix wrong filepath to user-data.example

@spinus: persistant storage 2

@thypon: digitalocean deploy: can't reach volume quorum

@udragon: Running DEIS in a standalone network

@zhaohanweng: router-nginx-status currently is public accessible if enabled

The Deis community continues to grow, and Deis wouldn't be here without you! If we slighted your contribution to this release, please let us know so we can update.

How can you help?

Star our GitHub repository

Help spread the word about @opendeis on Twitter

Join the conversation in the Slack channel

Voice your opinion on the Deis Roadmap by attending the monthly Release Planning Meeting

Pick an easy-fix or help wanted issue and start contributing!

Learn about other ways to get involved on our website.
Source code(tar.gz)
Source code(zip)
deis-1.13.0-SHA256SUMS(392 bytes)
deis-cli-1.13.0-darwin-amd64.run(2.30 MB)
deis-cli-1.13.0-linux-amd64.run(1.75 MB)
deisctl-1.13.0-darwin-amd64.run(3.38 MB)
deisctl-1.13.0-linux-amd64.run(2.54 MB)
v1.12.3(Feb 11, 2016)
Deis v1.12.3 updates CoreOS to 835.12.0 to fix an OpenSSL vulnerability.

v1.12.2 -> v1.12.3

Maintenance

7356d26 (all): bump CoreOS to 835.12.0

Source code(tar.gz)
Source code(zip)
deis-1.12.3-SHA256SUMS(392 bytes)
deis-cli-1.12.3-darwin-amd64.run(2.30 MB)
deis-cli-1.12.3-linux-amd64.run(1.75 MB)
deisctl-1.12.3-darwin-amd64.run(3.38 MB)
deisctl-1.12.3-linux-amd64.run(2.54 MB)
v1.12.2(Dec 1, 2015)
Deis v1.12.2 fixes HTTPS support for deis-database's wal-e in stateless mode, ensures that flannel starts before docker, prevents deis-builder from possibly not recognizing a git repo after restarting, and includes other minor improvements.

v1.12.1 -> v1.12.2

Fixes

0738c13 database: supports HTTPs as S3 endpoint

3498099 router: fix router common prefix app publishing

27eab71 contrib: Add drop-in to make docker require flannel

42d00af deisctl: don't panic when config key/value is malformed

7410fb7 builder: Fix problem with missed git repos after builder restart

Documentation

a19caaf managing_deis: change swift3 link.

82732b4 hacking: add docs to show how to use the docker-machine env

Maintenance

0f96abe contrib/coreos: remove debug-etcd service

e1e3927 MAINTAINERS: don't enumerate maintainers

Source code(tar.gz)
Source code(zip)
deis-1.12.2-SHA256SUMS(393 bytes)
deis-cli-1.12.2-darwin-amd64.run(2.30 MB)
deis-cli-1.12.2-linux-amd64.run(1.75 MB)
deisctl-1.12.2-darwin-amd64.run(3.38 MB)
deisctl-1.12.2-linux-amd64.run(2.54 MB)
v1.12.1(Nov 10, 2015)
Deis v1.12.1 fixes problems with the create_bucket script on S3 storage, ensures that flanneld starts on boot, mounts a separate data directory for etcd2 on AWS, and updates CoreOS stable to 766.5.0.

v1.12.0 -> v1.12.1

Fixes

293d657 registry: fix create_bucket s3 compatability

b07db69 user-data: always start flannel on boot

d9ef023 contrib: re-introduce data dir mapping for etcd

070d081 create_bucket: check for existence of None

Maintenance

3eb277a (all): bump CoreOS to 766.5.0

Source code(tar.gz)
Source code(zip)
deis-1.12.1-SHA256SUMS(392 bytes)
deis-cli-1.12.1-darwin-amd64.run(2.30 MB)
deis-cli-1.12.1-linux-amd64.run(1.75 MB)
deisctl-1.12.1-darwin-amd64.run(3.38 MB)
deisctl-1.12.1-linux-amd64.run(2.54 MB)
v1.12.0(Nov 4, 2015)
The Deis project is happy to announce v1.12.0, featuring changes to deis-builder and deis-controller to ensure future compatibility with Docker. deis pull finally works with current Docker images, and the new deisctl list-machines command helps you survey your Deis cluster.

NOTE: Docker Hub will disable access for docker versions 1.5 and earlier on December 7, 2015. Releases of Deis prior to v1.12.0 relied on docker 1.5.0 and will experience problems after that date. As a result, all users are encouraged to provision a new v1.12.0 cluster which does not rely on a specific docker version.

Join the fun: new contributors to Deis can get free DigitalOcean credits!

If you are coming from an earlier version of Deis, please read the "Upgrading Deis" documentation for details.

What is Deis?

Deis is an open source PaaS that makes it easy to deploy and manage applications on your own servers. Deis builds upon Docker and CoreOS to provide a lightweight PaaS with a Heroku-inspired workflow.

1.12.0 Summary

New Features

deis-controller uses the host's Docker engine for app config, no longer requiring Docker 1.5.0

deis pull now works with images built by Docker 1.6.2 and later

deisctl list-machines shows details of the nodes in your cluster

deis-logger has new drains that are more performant and resilient

deis-builder makes $SOURCE_VERSION available to buildpacks for Heroku compatibility

deis-controller disables swap usage when a memory limit is set

deis-registry logs more information during its startup process

Improvements

deis pull can use a Procfile provided on the command line

deis-builder will continue to update etcd after transient errors

deis-builder updated its Docker-in-Docker wrapper to work with upcoming versions

DigitalOcean provisioning workflow is smoother and simpler when using rigger

Provisioning on Azure, GCE, and Linode handles discovery URL replacement better

AWS AutoScaling Groups won't be replaced thanks to CloudFormation template changes

Azure provisioning uses premium storage for etcd reliability

Linode provisioning benefits from network and DHCP configuration tweaks

Documentation has been updated to mention stateless graceful upgrade, Deis release criteria, and dev pre-requisites

deis-database and deis-registry don't require "ListAllMyBuckets" permissions for S3 storage

deis-builder increased its timeout to fetch third-party buildpacks

Under the Hood

deis-builder uses Docker 1.8.3 internally for future compatibility

Deis CI systems use Docker 1.8.3 for building and testing

Heroku-compatible buildpacks were updated to current release versions

deisctl revised its fleet API code to v0.10.2

Ceph was updated to Hammer v0.94.5

Azure and Vagrant source their CoreOS version from one location: utils.sh

Most components updated their Docker base image to alpine:3.2

deis-router updated nginx to 1.9.6, including HTTP/2 support

For more details, please see CHANGELOG.md.

Community Shout-Outs

We want to thank the following Deis community members for creating GitHub issues, providing support to others, and working on various Deis branches:

@aespinosa: stale discovery URL when adding hosts

@arkkanoid: Deis omits tag environment when a limit is set, Error pulling image deis/slugbuilder

@clayzermk1: panic while getting logs for an app

@CloudSide: Could not find some docker images (tag: v1.11.1)

@crigor: New nodes should be members, not proxies, on the etcd cluster

@croemmich: fix(contrib/linode): fix discovery url issues in deployment scripts, fix(contrib/linode): fix issues with DHCP on Linode

@dmcnaught: Running without Ceph: deis-registry create_bucket looks for keys that aren't set:

@dustinrc: feat(contrib): vagrantfile sources utils.sh

@foxycoder: Deis controller flipping

@gahissy: deis/contrib/gce/gce-user-data generates an invalid cloud-config

@geeksoul-me: Logger is not draining logs in 1.11.1, Coreos user-data file uses public ip for fleet, firewall script brings fleet down

@gred7: Issue with stateless setup, how long [email protected]: activating/start-post should take?, getting application logs out of containers, disable adding of users

@helloravi: Cluster Provisioning question(~azure)

@jacobo: Increase timeout for fetching buildpacks

@jannispl: custom-firewall.sh: jump to firewall is appended rather than prepended

@jeff-lee: Improving ability to work with multiple deis clusters, Cross zone load balancing disabled, Units failing to start with overlay errors v1.11.0

@jgmize: Non-zero-downtime deploys with healthcheck enabled, ref(aws): prevent replacement of ASG in CF update, add flocks to additional services

@Joshua-Anderson: Ceph Build GPG Verification Error, feat(deisctl): bump fleet api to v0.10.2, fix(client): read procfile from PWD when pulling, fix(client): add newline for usage message

@karthequian: Common spelling error fixes

@kenaniah: deis client breaks when enforceHTTPS is enabled

@landonclark: Integrate letsencrypt into the app provisioning / installation process

@leshik: DO provider isn't working with latest terraform

@LoicMahieu: docs(upgrading-deis): graceful upgrade in stateless mode

@myyk: Feature request - HTTP/2 support, docs(contributing): update where build instructions are, docs(contributing): add optional pre-reqs, Cleanup dead config

@nathansamson: Disk cleaning does not remove all old images..., Investigate floating IPs for DigitalOcean, missing install instructions for deis client for windows, ceph warns about clock skew on DO, contrib/util/firewall.sh breaks cluster

@ngauthier: Panic on deis create following tutorial, fix(client): catch and propagate client errors

@olalonde: HTTP 413 (entity too large) error after setting bodySize to "10000M", feat(client) support pipes with deis config:push and deis:config pull, Proxying some apps through mashape/kong API gateway, bug(client/controller): deis logs replaces " with ", feat(builder): make SOURCE_VERSION env variable

@pdaniel-frk: problems running deis installer azure

@philippwiendl: app container failed to start

@pmclanahan: Deis should send host header with health checks.

@ritazh: Bug (contrib/azure) - unable to add new discovery URL to azure-user-data, fix(contrib/azure)-replace discovery url

@robeferre: Deis is losing a node every time., Cant start the platform in 1.11.1, Cannot perform, deis info, deis create

@rvaralda: Deis Registry miss /deis/store/gateway key while use S3 as storage, ref(registry/database): change the create_bucket script to avoid allow 'ListAllMyBuckets' on S3 Policy

@rvm2015: etcd2 setup fails on 2 of 3 nodes, expand installation docs on DNS setup, expand installation docs on public/private ip space, bare-metal docs, move the hostname 'known issue' above the installation, deisctl install platform hangs on deis-router/router mesh

@sbuss: Encrypt the router<->container link, bug(client): New deis go client does not read Procfiles from current directory during deis pull

@shingara: add pre/post deploy hook

@stuszynski: Admin can't see application certificates added by another admin.

@synaptics: Urgent help! deis-controller not starting, seems caught in a loop, HELP! deis-store-daemon high memory utilisation

@taxido: deis builder doesn't start because of deis registry gunicorn worker restart Error: 100: Key not found (/deis/registry/masterLock)

@thiver: heroku buildpack fails, but commits gets accepted

@vinilios: custom-firewall.sh with k8s scheduler issues

The Deis community continues to grow, and Deis wouldn't be here without you! If we slighted your contribution to this release, please let us know so we can update.

How can you help?

Star our GitHub repository

Help spread the word about @opendeis on Twitter

Join the conversation in the #deis channel on Freenode

Voice your opinion on the Deis Roadmap by attending the monthly Release Planning Meeting

Pick an easy-fix or help wanted issue and start contributing!

Learn about other ways to get involved on our website.
Source code(tar.gz)
Source code(zip)
deis-1.12.0-SHA256SUMS(392 bytes)
deis-cli-1.12.0-darwin-amd64.run(2.30 MB)
deis-cli-1.12.0-linux-amd64.run(1.75 MB)
deisctl-1.12.0-darwin-amd64.run(3.38 MB)
deisctl-1.12.0-linux-amd64.run(2.54 MB)
v1.11.2(Oct 21, 2015)
Deis v1.11.2 further works around a bug in simultaneous docker pull by serializing all relevant commands in systemd units. This patch release also reverts the fleet service to $private_ipv4, allowing the DigitalOcean firewall script to work again for new cluster provisioning.

v1.11.1 -> v1.11.2

Fixes

abe3fa0 fix(user-data): use $private_ipv4 for fleet

c55d9c8 fix(*) add flocks to additional services

6dc0da4 fix(*) add flocks to -data pulls for db & builder

Source code(tar.gz)
Source code(zip)
deis-1.11.2-SHA256SUMS(392 bytes)
deis-cli-1.11.2-darwin-amd64.run(2.30 MB)
deis-cli-1.11.2-linux-amd64.run(1.75 MB)
deisctl-1.11.2-darwin-amd64.run(3.38 MB)
deisctl-1.11.2-linux-amd64.run(2.54 MB)
v1.11.1(Oct 11, 2015)
Deis v1.11.1 works around a bug in simultaneous docker pull by serializing the startup of global units with layers in common.

v1.11.0 -> v1.11.1

Fixes

7c02cd6 fix(*): use flock to serialize certain pulls

Source code(tar.gz)
Source code(zip)
deis-1.11.1-SHA256SUMS(392 bytes)
deis-cli-1.11.1-darwin-amd64.run(2.30 MB)
deis-cli-1.11.1-linux-amd64.run(1.75 MB)
deisctl-1.11.1-darwin-amd64.run(3.38 MB)
deisctl-1.11.1-linux-amd64.run(2.54 MB)
v1.11.0(Oct 6, 2015)
The Deis project is proud to announce v1.11.0, featuring a rewritten deis-logger component with settings that allow in-memory storage and TCP forwarding. Stateless Deis clusters now include deis-logger and support the deis logs command.

Join the fun: new contributors to Deis can get free DigitalOcean credits!

If you are coming from an earlier version of Deis, please read the "Upgrading Deis" documentation for details.

What is Deis?

Deis is an open source PaaS that makes it easy to deploy and manage applications on your own servers. Deis builds upon Docker and CoreOS to provide a lightweight PaaS with a Heroku-inspired workflow.

1.11.0 Summary

New Features

deis-logger is rewritten for stability and extensibility

deis-registry allows IAM role authentication for S3

deis apps:transfer lets a user hand off ownership of an app to another user

deis-builder checks out submodules in custom buildpacks as needed

deis-router on AWS has improved Kubernetes-aware ELB healthchecks

deis-router can enforce whitelisting of IP addresses for apps or for deis-controller

New AWS clusters prevent CloudFormation from replacing instances on AMI changes

$DEISCTL_TUNNEL is automatically discovered on vagrant provisioning

deis-controller can write app event logs via logspout

Improvements

Scripts in contrib/ support rigger, the new deployment tool for Deis

deis-controller healthchecks properly ignore non-web processes

Graceful upgrades fixed several issues found in the wild

Documentation is more detailed about Azure provisioning and when deisctl is needed

Docs have an architecture diagram and detail about the deis-router mesh

Docs give an example of backing deis-registry with OpenStack Swift

deis config:set handles multi-line environment variables

The deis client suggests help if deis create fails on the git remote

deis correctly displays unexpected non-JSON error messages and malformed logs

deis prints all error messages to stderr

The route53-wildcard contrib script handles its --zone argument correctly

deis register returns a better error if registration is disabled

deisctl status is listed in the main help message

deis-controller more thoroughly validates config keys

contrib/ firewall scripts check that etcd is running

Under the Hood

CoreOS is updated to 766.4.0, the current stable channel version

New clusters use CoreOS' default etcd2 and flannel services

Azure provisioning uses new ARM templates

DigitalOcean provisioning uses terraform

The optional deis-cache component is removed, but deis-registry still uses it if it is present in an upgraded cluster

The shellcheck script linter tool was updated to 0.4.1

For more details, please see CHANGELOG.md.

What's Next

Docker v2 Registry

The Deis registry must be upgraded to the new v2 API to ensure forward-compatibility with Docker. This has a number of added benefits including performance and trust. Great progress has been made in detaching deis-controller from depending on a specific Docker version and in reimplementing deis pull to work with any standard registry container. Work remains to migrate existing v1 registry data to v2.

Rigger

Rigger is a new tool designed to make it easier to provision and test Deis clusters. With rigger, you can stand up and test a Deis cluster on any provider with just a handful of simple commands. The Deis core team is already using rigger internally, but we are looking for feedback. Please provide your thoughts and requirements on the design document.

Community Shout-Outs

We want to thank the following Deis community members for creating GitHub issues, providing support to others, and working on various Deis branches:

@aj-may: Prototyping and discussion that led directly to the new deis-logger and its in-memory ringbuffer

@benbarclay: Builder incorrectly sources proxy env vars

@benwilber: bug(builder): Procfile should not be parsed as YAML, fix(deisctl): default stdout and stderr are reversed, fix(tests): binaries are installed in the wrong directories, fix(controller): validate config keys at the api level, fix(controller): state property can't be used in a list_filter in the Django web admin

@clayzermk1: builder will not come up after updating CoreOS on a v1.10.1 cluster, logspout death looping on deis v1.8.0

@CloudSide: How do I proxy the deisctl to Restful-API use https?

@crigor: Graceful Upgrade: Restart the routers once

@Crispy1975: enforceHTTPS causes unwanted redirect.

@duanhongyi: deis-builder can't start, docs(managing_deis): add OpenStack Swift store example

@dustinrc: fix(contrib): urlopen call hangs

@eroubal: 'deis pull' gives me constant 404 NOT FOUND

@Footjy: Support for self-signed certificates

@franquis: deis-builder v1.10.1 stays in state Activating/start-post

@geeksoul-me: Deisctl start stateless-platform hangs at builder after upgrade from 1.9.1 to 1.10.0

@gred7: trying to provision a cluster on amazon aws

@helloravi: Cluster Provisioning question(~azure)

@iartem: Deis logs "panic: runtime error: index out of range"

@ineu: Instructions on creating external database from scratch, All database contents is lost when database is rescheduled to another machine, Backup/restore documentation is not precise

@jfchevrette: Fix awk field separator not working on non-GNU awk

@jgmize: Proposal feat(k8s): docker-compose.yml syntax support via compose2kube

@Joshua-Anderson: fix(client): accept multi line config vars., feat(client): print error messages to stderr, fix(Makefile): silence docker-machine warning when it isn't installed, feat(controller): allow users to transfer app ownership.

@jwaldrip: Issues with Controller v1.6.1

@laurrentt: feat(Registry): add support for IAM role authentication, feat(Router): IP whitelisting for apps and controller, fix(controller): healthcheck no longer check non-web processes

@LoicMahieu: Can not use official nginx docker image on port 80, Stateless Install: deis-router continually logs signal process started, Stateless install: graceful upgrade re-install Deis in stateful mode, Can add multiple ssh keys with the same name and remove throws an exception

@mariusmarais: Router and application tagging

@msull92: Builder 400 error, Platform SSL certificate alongside application certificate, Issue removing ssl cert from application with spaces in common name

@nasali: CoreOS Configuration

@nathansamson: Protect pushes from wrong branch

@nsmith: Add https log drain type

@olalonde: fatal: 'somerepo.git' does not appear to be a git repository, Builder: Make git sha hash available during build, Router scheduled on machine with metadata routerMesh=false, docker: "pull" requires 1 argument. See 'docker pull --help', Stateless install: recommended RDS settings for database?

@robeferre: Cannot perform, deis info, deis create

@rvadim: Prototyping and discussion that led directly to the new deis-logger and its in-memory ringbuffer, Builder problem: ssh_exchange_identification: Connection closed by remote host.

@rvaralda: Deis Registry miss /deis/store/gateway key while use S3 as storage

@slash-: ceph mon down

@sstarcher: Graceful Shutdown does not remove from Discovery URL, Graceful Shutdown requires Ceph, config:push with .env does not support multline, fix(contrib): Zone argument not supported for aws

@szymonpk: proposal: atomic cert update

The Deis community continues to grow, and Deis wouldn't be here without you! If we slighted your contribution to this release, please let us know so we can update.

How can you help?

Star our GitHub repository

Help spread the word about @opendeis on Twitter

Join the conversation in the #deis channel on Freenode

Voice your opinion on the Deis Roadmap by attending the monthly Release Planning Meeting

Pick an easy-fix or help wanted issue and start contributing!

Learn about other ways to get involved on our website.
Source code(tar.gz)
Source code(zip)
deis-1.11.0-SHA256SUMS(392 bytes)
deis-cli-1.11.0-darwin-amd64.run(2.30 MB)
deis-cli-1.11.0-linux-amd64.run(1.75 MB)
deisctl-1.11.0-darwin-amd64.run(3.38 MB)
deisctl-1.11.0-linux-amd64.run(2.54 MB)
v1.10.1(Sep 22, 2015)
Deis v1.10.1 fixes a problem with components not stopping cleanly, improves database boot to avoid startup issues, and rectifies deisctl output streams.

v1.10.0 -> v1.10.1

Fixes

04a9306 deisctl: default stdout and stderr are reversed

5878b8f (all): ensure component containers stop

9ef640f database: improve postgres ready checks

fb44cbc database: fix db init file perms

Source code(tar.gz)
Source code(zip)
deis-cli-1.10.1-darwin-amd64.run(2.30 MB)
deis-cli-1.10.1-linux-amd64.run(1.75 MB)
deisctl-1.10.1-darwin-amd64.run(3.38 MB)
deisctl-1.10.1-linux-amd64.run(2.54 MB)
v1.10.0(Sep 4, 2015)
The Deis project is proud to announce v1.10.0, which speeds up the deis command-line client and deis-builder.

Join the fun: new contributors to Deis can get free DigitalOcean credits!

If you are coming from an earlier version of Deis, please read the "Upgrading Deis" documentation for details.

What is Deis?

Deis is an open source PaaS that makes it easy to deploy and manage applications on your own servers. Deis builds upon Docker and CoreOS to provide a lightweight PaaS with a Heroku-inspired workflow.

1.10.0 Summary

New Features

The deis command-line tool has been rewritten in Go and is much faster

The deis-builder component has been rewritten in Go and is faster and more reliable

All buildpacks in deis-builder have been updated to the most recent versions tagged by Heroku

deis-logspout can optionally deliver logs via TCP

deis-router gained an informative traffic status page

deis respects the --limit= flag for commands which list results

Automated provision and upgrade acceptance tests now live under tests/bin/accept

Improvements

Various fixes to AWS, Azure, bare metal, Linode, and OpenStack provisioning

Optional swarm scheduler components aren't built by default now; use make -C swarm/ build

NewRelic contrib docs updated now that container CPU and memory usage are available

deis-logger logs a unique id for each app name, helping Kubernetes scheduler usage

deis-logger now allows underscores in container names

deis-logspout fixes a potential deadlock when attaching to containers

Integration tests fail if deis prints any warning

Collaborators on apps can no longer manage others' permissions without being admins

Users can revoke their own app access, and some permissions checks were fixed

deisctl install and similar commands group k8s, mesos, and swarm components logically

deisctl dock and deisctl ssh show help and handle arguments more consistently

Under the Hood

All components and clients are built with Go 1.5, which speeds garbage collection and enables concurrent execution

nginx is updated to 1.9.4

deis-store components are updated to Ceph 0.94.3

For more details, please see CHANGELOG.md.

What's Next

Docker Engine Upgrade

Due to critical bugs in recent Docker engines related to parallel layer pulls and v1/v2 registry compatibility, we've been forced to pin Deis clusters to Docker 1.5.0. We now believe these issues have been resolved and are eager to move to the newer version of Docker that ships with the latest CoreOS stable release.

Docker v2 Registry

The Deis registry must be upgraded to the new v2 API to ensure forward-compatibility with Docker. This has a number of added benefits including performance and trust. However, this will be a tricky migration given the v1 registry data we currently store, as well as the deis pull hooks in our fork of the Docker registry.

Rigger

Rigger is a new tool designed to make it easier to provision and test Deis clusters. With rigger, you can stand up and test a Deis cluster on any provider with just a handful of simple commands. The Deis core team is already using rigger internally, but we are looking for feedback. Please provide your thoughts and requirements on the design document.

Community Shout-Outs

We want to thank the following Deis community members for creating GitHub issues, providing support to others, and working on various Deis branches:

@adrianmoya: Error trying to install

@aendrew: Builder not coming up after 1.9 upgrade

@afterthought: Restore from backup: expected state of services, Fleet failover fail

@alex: style(contrib/aws): Ensure that files are closed and use yaml.safe_load, chore(docs): Fixed rendering of a few code snippets

@anissrelicum: run commande "play evolutions --%prod" [ play framework 1.3.1]

@apps4u: AWS Elastic File System

@arkkanoid: Use cache in deployed Apps

@bf4: logging issues and etcd failures on Deis 1.7.3, getting OpenSSL.SSL.ZeroReturnError in failure set env variable

@cchamilt: natdnshostresolver1 in Vagrantfile needs to be "on" for VirtualBox on OSX now?

@cheshirecatalyst: config push / set 500's

@cimnine: Freshly set up deis cluster does not work [bare-metal]

@clayzermk1: fix(builder): always configure SSH key

@clescot: documentation does not mention incompatibility between deis and coreos shipping buggy docker versions

@Crispy1975: Fresh AWS Install: Docs should say to install deisctl first

@croemmich: feat(router): enable ssl caching and expose ssl_protocols for configuration, fix(contrib/linode): Install CoreOS from the stable channel

@daanemanz: Builder fails to start in stateless platform

@geeksoul-me: Deis publisher throwing error after 1.8 to 1.9 upgrade of stateless-platform

@glogiotatidis: fix(docs): update NewRelic section.

@gvilarino: Google: configuring DNS managed outside of Google DNS service? , Azure: unable to create apps on newly created cluster

@ineu: Cluster recreation: git push gives weird errors, Better error message when registration is disabled, OSD doesn't join cluster after node reboot, Deploys stop to work, /deis/platform/version missing in new installation, Log size limit settings?, Docker won't start in new cluster, deis-controller fails with CannotSendRequest

@JeanMertz: Deis using existing Kubernetes cluster

@kalbasit: Confd is sub-matching applications leading to non-existing application, Kubernetes leaving behind old releases running, docs(managing_deis): remove a space from a bash substitution

@klaussilveira: "Global" environment variables for all applications

@laurrentt: Request feat(controller): Specify custom user in docker run, feat(logspout): support sending log via tcp, docs(isolating-etcd): add link to user-data.example, feat(Makefile): option to disable store components

@LoicMahieu: Stateless install: deis-builder don't start

@MaxenceAdnot: Mesos fails to start, Controller error : 'remaining connection slots are reserved for non-replication superuser connections'

@mdolian: Problems cloning a public repository using NPM in builder, Azure nodes should be launched into an availability set

@nathansamson: can not bootstrap v1.9.0 cluster

@olalonde: Error pulling image ... ApplyLayer fork/exec ... /usr/bin/docker: cannot allocate memory, Atomically switch over DNS for blue-green deployment

@paulczar: fix(contrib/openstack/provision-openstack-cluster.sh): fix openstack …

@rimusz: deis 1.9.0 does not “decorate” the Fleet units, Proposal isolating etcd/planes/router mesh

@rvadim: Failed to pull logspout image from docker hub

@sbuss: Provide SHA256 hashes of deis and deisctl binaries, fix(contrib) AWS instances may only have a private IP

@sitya: Question about Kubernetes, Deis and etcd

@SomeoneWeird: Issue pulling docker images from local registry.

@sstarcher: Restrict Router application set, Router ERROR Missing template , AWS Deis Cluster - Flannel on ASG Event

@szymonpk: is cloud formation template is on the edge of size?

@vesmi: Healthcheck problem

@Xowap: Insecure etcd by default, Attach volume to app

@yebyen: contrib/util/custom-firewall.sh throws increasingly disconcerting messages

@zapient: Add ability to define separate cluster network

The Deis community continues to grow, and Deis wouldn't be here without you! If we slighted your contribution to this release, please let us know so we can update.

How can you help?

Star our GitHub repository

Help spread the word about @opendeis on Twitter

Join the conversation in the #deis channel on Freenode

Voice your opinion on the Deis Roadmap by attending the monthly Release Planning Meeting

Pick an easy-fix or help wanted issue and start contributing!

Learn about other ways to get involved on our website.
Source code(tar.gz)
Source code(zip)
deis-cli-1.10.0-darwin-amd64.run(2.30 MB)
deis-cli-1.10.0-linux-amd64.run(1.75 MB)
deisctl-1.10.0-darwin-amd64.run(3.38 MB)
deisctl-1.10.0-linux-amd64.run(2.54 MB)
v1.9.1(Aug 24, 2015)
Deis v1.9.1 fixes an error that could prevent etcd2 from starting properly on AWS clusters, a problem that hampered flannel on DigitalOcean, and several other issues. Any user who has had trouble provisioning Deis on AWS or DigitalOcean is encouraged to re-provision using Deis v1.9.1.

v1.9.0 -> v1.9.1

Fixes

d9a09b0 contrib: fix etcd2 data directory on AWS

8f50e70 publisher: ignore healthcheck values if unset

70867aa controller: require fleet.socket

1f2264c flannel: use default iface for starting flannel except vagrant

ee15c14 deisctl/units: stop k8s services without errors

e92e2db contrib: fix debug-etcd

837ef9d mesos-marathon: change instances to zero instead of scale to zero

Maintenance

76571aa (all): bump etcd to 2.1.2

Source code(tar.gz)
Source code(zip)
deis-cli-1.9.1-darwin-amd64.run(6.78 MB)
deis-cli-1.9.1-linux-amd64.run(6.88 MB)
deisctl-1.9.1-darwin-amd64.run(2.91 MB)
deisctl-1.9.1-linux-amd64.run(2.25 MB)
v1.9.0(Aug 5, 2015)
The Deis project is happy to announce v1.9.0, which introduces Kubernetes and Mesos tech preview schedulers, provides custom health checks for your apps, and lays groundwork for the future with graceful upgrade tools.

If you are coming from an earlier version of Deis, please read the "Upgrading Deis" documentation for details.

What is Deis?

Deis is an open source PaaS that makes it easy to deploy and manage applications on your own servers. Deis builds upon Docker and CoreOS to provide a lightweight PaaS with a Heroku-inspired workflow.

1.9.0 Summary

New Features

Kubernetes scheduler tech preview!

Mesos with Marathon scheduler tech preview!

deis config:set HEALTHCHECK_URL=/ enables liveness and readiness app health checks

Tools for a graceful upgrade to future versions of Deis are in place

deisctl dock opens a shell or runs commands on a running container

deisctl ssh can also run commands directly on a node

deisctl install can specify the router mesh size (default is 3)

A faster, more portable deis CLI written in Go is ready for your testing and feedback!

make commit-hook installs a helper to warn about git commit style

Improvements

deisctl exits with an error if stop or start fails

deis-controller enforces correct types for CPU, mem, and tags config

deis-controller allows non-superusers to manage their keys

deis-controller ignores setting gunicorn workers < 1

deis-database backs up the DB on unit stop

deis-logger uses only one Ticker for time-related operations

deis-publisher displays the HTTP error on connection failure

deis-router builds the set-misc module for nginx set_random

Makefiles install go tools from golang.org, not code.google.com

Under the Hood

Shell scripts throughout the project are validated with shellcheck

The flannel overlay network is active on newly provisioned clusters

etcd v2.1.1 runs in a container on newly provisioned clusters

Updated vendored fleet code for deisctl to 0.9.2

Updated vendored Docker code for tests to 1.5.0

deis-router verifies the downloaded nginx archive

For more details, please see CHANGELOG.md.

What's Next

Builder in Go

The deis-builder component consists of a variety of shell scripts and binary tools which has proved difficult to maintain over time. Rewriting the builder as a set of Go packages will make it easier to test, improve, and extend this core component.

This work is nearly completed. See PR 4010 for more detail.

Deis CLI in Go

The deis CLI is a one-file python app that has served the project well, but its PyInstaller-based binary packaging is inefficient, and it sometimes runs into incompatibilities with specific platforms. Rewriting the deis CLI as a Go binary has already proved to be faster and more portable.

This work is nearly completed. See PR 4015 for more detail.

TTY Broker

Today Deis cannot provide bi-directional streams needed for log tailing and interactive batch processes. By having the Controller drive a TTY Broker component, Deis can securely open WebSockets through the routing mesh.

See TTY Broker at the Deis Roadmap for more detail.

Teams / Fine-Grained Permissions

Deis uses a simple permissions model currently, involving only two roles: admin and user. Features such as sharing applications, modifying certs, and changing config could be implemented with more specific permissions.

Work is underway on gathering community feedback and implementing teams and more refined permissions. See issue 4150 and issue 4173 for details.

Community Shout-Outs

The Deis project would like to extend our profound gratitude to 2015 interns Joshua Anderson (@Joshua-Anderson) and Keerthan Mala (@kmala). Joshua attacked the controller, client, and project infrastructure and made myriad improvements while rewriting our world in Go. Keerthan applied his domain expertise and owned Kubernetes (k8s), giving Deis a scheduler for the future. We have all enjoyed working with Joshua and Keerthan more than we can say, and the Deis project is much richer because of them. Thank you!

We want to thank the following Deis community members for creating GitHub issues, providing support to others, and working on various Deis branches:

@altitude: [question] Why should I maintain an odd number of servers ?

@arkkanoid: Logstash doesn't receive logs from Logspout

@arv1989: Deis cluster on Microsoft Azure script fails

@bladealslayer: Add verification of downloaded nginx archive.

@clayzermk1: SSH_KEY is ignored when not specifying BUILDPACK_URL, deis pull registry returns error "Tag not found" on 1.8.0

@Crispy1975: Vagrant: error: failed to push some refs

@croemmich: SSL Session Ticket Rotation, fix(contrib/linode): Install CoreOS from the stable channel

@fabiob: fix(router): add set-misc module to nginx build

@gabeio: /docs/managing_deis/configure-dns.rst is in the middle of a merge conflict

@ineu: deis config and releases are inconsistent, Containers are out of sync with releases

@jacopofar: Let the admin delete a user from the CLI

@JeanMertz: Deis on top of Mesosphere's DCOS

@jeff-lee: deisctl should warn when unit files have errors

@jorihardman: Non-admin users cannot remove ssh keys

@jwaldrip: Feature Request: Cluster-Wide ENV vars

@laurrentt: feat(deisctl): specify # of routers to install

@LoicMahieu: deis logs not showing application logs when use of Dockerfile

@mdolian: docs(managing_deis): add section for registrationMode

@molisoft: can't run created linodes

@msull92: deis run "interactive console"

@mxk1235: Not sure how to kill run.N processes, Cannot execute 'deis run ls'

@nasali: Deis in-place upgrade to 1.8.0 made my apps invisible , Deis Controller API

@nathansamson: Running docker registry results in out of disk space error, Virtualbox requirements are wrong

@nilnullzip: Security concern: controller and app data paths mixed together

@olalonde: 503 service unavailable when running deis pull drone/drone:latest, Possible to pass custom docker flags to Deis app?, deis-builder won't start after 1.6.1 -> 1.7.3 upgrade, deis config:push -a someappname doesn't work

@paulczar: fix(contrib/openstack/provision-openstack-cluster.sh): fix openstack …

@rochacon: fix(controller): allow non superusers to manage their keys

@sstarcher: Connection Draining

@szymonpk: aws elb instances ip addresses mismatch, Sanitize/filter config variables from client, no output from deis run while using ruby's puts or pp

@tscheepers: fix(contrib/gce): updated GCE docs with new cloud dns config and commas

@woopstar: stop-update-engine.service results in degraded status, Launching the sample app on a new deis cloud is failing, Wrong path to link deisctl into $PWD

The Deis community continues to grow, and Deis wouldn't be here without you! If we slighted your contribution to this release, please let us know so we can update.

How can you help?

Star our GitHub repository

Help spread the word about @opendeis on Twitter

Join the conversation in the #deis channel on Freenode

Voice your opinion on the Deis Roadmap by attending the monthly Release Planning Meeting

Pick an easy-fix or help wanted issue and start contributing!

Learn about other ways to get involved on our website.
Source code(tar.gz)
Source code(zip)
deis-cli-1.9.0-darwin-amd64.run(6.78 MB)
deis-cli-1.9.0-linux-amd64.run(6.87 MB)
deisctl-1.9.0-darwin-amd64.run(2.91 MB)
deisctl-1.9.0-linux-amd64.run(2.25 MB)
v1.8.0(Jul 13, 2015)
The Deis project is proud to announce v1.8.0, which makes installation of store, database, and logger optional when running external backing stores, adds deisctl ssh and deis auth:regenerate commands, and unleashes Deis onto Linode.

If you are coming from an earlier version of Deis, please read the "Upgrading Deis" documentation for details.

What is Deis?

Deis is an open source PaaS that makes it easy to deploy and manage applications on your own servers. Deis builds upon Docker and CoreOS to provide a lightweight PaaS with a Heroku-inspired workflow.

1.8.0 Summary

New Features

Deis can be provisioned without Ceph by using an external backing store

deis-router uses new nginx reuseport socket sharding

Deis can be provisioned on Linode, thanks to community support!

deisctl ssh <component> opens a shell directly to the node running the specified Deis component

deis-router features security configuration for DHE ciphersuites, SSL ciphers, and HSTS

deis auth:regenerate creates a new authentication token

deis-controller will properly roll back a release if some containers weren't created

Improvements

Source code for deisctl is substantially refactored, with beefier, parallelized test coverage

Numerous enhancements to API reference documentation and generated code docs

Fixed "invalid tar magic" error when pushing without a Procfile

Fixed JSON decoding errors in test suite due to premature SSH close

deis-builder generates SSH keys on boot when needed

Doc updates to upgrade procedure, EC2 PROXY protocol, and cluster sizing for etcd

Contrib README.md mentions new community tools for monitoring and backup/restore

Added Engine Yard provisioning and Deis Pro to docs

deisctl won't hang forever waiting for a missing service

deis-builder only builds slugrunner/slugbuilder if they're missing

Amazon EC2 m4 instance types are now supported in provisioning

DigitalOcean support added a couple of eligible regions

DEIS_DRINK_OF_CHOICE=slurm won't break integration tests now

deis-registry will SIGHUP its processes correctly on restart

deis-builder won't log etcdctl watch output periodically

integration tests will retry docker push on Docker Hub errors

Under the Hood

deis-router updated nginx to 1.9.2

deis-registry incorporates some upstream fixes to the "classic" V1 registry

deis-database updated wal-e to 0.8.1

deis-controller updated psycopg2 to 2.6.1

Several components updated to confd 0.10.0

For more details, please see CHANGELOG.md.

What's Next

Configurable Healthchecks

To enable publishing of new app releases with zero downtime, Deis needs a more strict, configurable HTTP healthcheck facility. Substantial progress has been made, but more coding and testing remains. Look forward to true zero-downtime deploys in the next release!

TTY Broker

Today Deis cannot provide bi-directional streams needed for log tailing and interactive batch processes. By having the Controller drive a TTY Broker component, Deis can securely open WebSockets through the routing mesh.

See TTY Broker at the Deis Roadmap for more detail.

Scheduling and Orchestration

Today Deis uses Fleet for scheduling. Unfortunately, Fleet does not support resource-based scheduling, which results in poor cluster utilization at scale.

Fortunately, Deis is composable and can easily hot-swap orchestration APIs. Because the most promising container orchestration solutions are under heavy development, the Deis project is focused on releasing "technology previews".

These technology previews will help the community try different orchestration solutions easily, report their findings and help guide the future direction of Deis.

See Scheduling and Orchestration at the Deis Roadmap for more detail.

Etcd 2

A CP database like etcd is central to Deis, which requires a distributed lock service and key/value store. As problems with etcd directly impact platform stability, Deis must move to the more stable etcd2.

See Etcd 2 at the Deis Roadmap for more detail.

Community Shout-Outs

We want to thank the following Deis community members for creating GitHub issues, providing support to others, and working on various Deis branches:

@adrianandreias: Feature: rkt (rocket) support

@aendrew: 404 after upgrading to 1.7.0

@ainux4mrvce: deis create issue, dockerfile, not able to push on deis master , deis login error

@bastilian: deisctl seems to ignore options

@crigor: Don't exclude .git on the slug, Update Installing SSL on a Load Balancer Doc, Admins should be able to delete users

@Crispy1975: Vagrant: error: failed to push some refs, Cannot deploy using Heroku buildpack and private repositories.

@croemmich: Can't start builder on 1.7.2., docs(backing_up_data): Add community tools for reference, docs(contrib): add link to Deis Backup and Restore, feat(contrib/linode): add Linode provision scripts and docs

@dpanelli: Deploy of a new version fails with: "tar: invalid tar magic " after Deis update 1.5 to 1.7

@etcinit: Client may break if enforceHTTPS=true and the client config points to http

@fabiob: AffinityArg hangs router on 1.7.3, docs(*): update references to the new base image, alpine

@glenwong: Multiple clusters for dev, staging, and production?

@glogiotatidis: App users should be able to add/edit/delete domains for app

@ineu: deisctl installation script output is not colorized in bash or zsh, Pull new versions of deis in advance?

@kalbasit: fix(deisctl): avoid blocking if output is empty

@krancour: API / controller logging should be via logspout, bug(docs): Inaccurate description of builder responsibilities, fix(docs): Correct and clarify description of builder component, fix(tests): fix assertions on default beverage

@linki: fix(router): fix markdown table rendering

@liuyang1204: Gateway Key not found (/deis/store/gateway/masterLock) [8462114]

@lorieri: deis domains doesn't check for existing apps, restarting builder requires app destroy

@megastef: docs(manage_deis) - add SPM Performance Monitoring

@mikepack: already don't -> don't already, ot -> to

@nathansamson: Use flocker to replace Ceph for database & builder & ..., fix(client): Fix attribute errors on windows

@ngerakines: Errors in logs, possibly from store.

@olalonde: deis-builder won't start after 1.6.1 -> 1.7.3 upgrade, deis config:push -a someappname doesn't work, "Welcome to nginx!" page after git push, journalctl shows "[WARNING] - 501: All the given peers are not reachable (Tried to connect to each peer twice and failed) [0]" on a machine, Auto restart app when it crashes?, Can't push to deis after deisctl restart builder, deis logs doesn't show log with Procfile based deployment, Weird deis ps output after running deis config:set ... and git push at the "same" time, "Welcome to NGINX" after switching from Dockerfile based deployment to Procfile, HTTPS 504 GATEWAY_TIMEOUT after setting AWS ELB https

@phspagiari: Deis scale isnt respecting the cluster.

@s20691033: store daemon is giving errors, deis run writes output to logs, and not to the client, noise in logs on non-ipv6 hosts

@sbuss: Starting platform hangs on the builder, can't find an image

@scottrobertson: deis run throws 500 error, /home/git/repo.git/build not being cleaned up, Idea: Deployment Keys, After upgrade to 1.7, sites are 404'ing and cannot push

@sockeye44: Go build failed, Play framework build failed

@sstarcher: Connection Draining, deisctl --version returns exit code of 1

@szymonpk: Sanitize/filter config variables from client, no output from deis run while using ruby's puts or pp, create_bucket should use secure transport if external s3 is used and it should respect s3 region, proposal feat(client) allow for custom git hostname, deis client can't setup ssl connection via cloudflare, deis-logger is eating whole cpu

@wenzowski: HPKP Public-Key-Pins Header, feat(router): add Diffie-Hellman parameter for DHE ciphersuites, feat(router): read list of preferred ciphers, feat(router): enable HSTS when enforceHTTPS is set, fix(router): set_random belongs in a location block

@wgrrrr: chore(contrib/ec2): add m4 instance types

@woopstar: Installator hanged, but platform is up and running

@zag2art: Builder can't start after upgrade 1.5.2 -> 1.7.3

The Deis community continues to grow, and Deis wouldn't be here without you! If we slighted your contribution to this release, please let us know so we can update.

How can you help?

Star our GitHub repository

Help spread the word about @opendeis on Twitter

Join the conversation in the #deis channel on Freenode

Voice your opinion on the Deis Roadmap by attending the monthly Release Planning Meeting

Pick an easy-fix or help wanted issue and start contributing!

Learn about other ways to get involved on our website.
Source code(tar.gz)
Source code(zip)
v1.7.3(Jun 15, 2015)
Deis v1.7.3 fixes an issue where the deis/slugrunner image could be inadvertently removed, preventing deis/builder from starting up.

v1.7.2 -> v1.7.3

Fixes

87d2ba3 builder: call ls rather than using a wildcard

Source code(tar.gz)
Source code(zip)
v1.7.2(Jun 11, 2015)
Deis v1.7.1 fixes an issue with deis-logger publishing keys to etcd too frequently, causing high CPU load. All Deis users are encouraged to upgrade to this release.

v1.7.1 -> v1.7.2

Fixes

c73c8f7 logger: adjust publish and ttl times to seconds

Source code(tar.gz)
Source code(zip)
v1.7.1(Jun 10, 2015)
Deis v1.7.1 fixes an issue in deisctl where refresh-units was not appending .service to the refreshed unit files, causing users to deploy older unit files when upgrading.

v1.7.0 -> v1.7.1

Fixes

e8df401 deisctl: Add extension when refreshing units

Source code(tar.gz)
Source code(zip)
v1.7.0(Jun 8, 2015)
NOTE: Some users have reported seeing 404s when accessing running applications after upgrading to v1.7. We have been unable to reliably recreate this, and are hoping our users can provide more context to aid in debugging. As always, please upgrade non-production clusters first whenever possible, and please report any issues so that we can investigate and address them.

The Deis project is excited to announce v1.7.0, featuring automatic host removal, smaller Docker images, and fixes for platform hardening. The leading open source PaaS is now yours to steer: read the Deis Open Roadmap and participate in release planning!

If you are coming from an earlier version of Deis, please read the "Upgrading Deis" documentation for details.

What is Deis?

Deis is an open source PaaS that makes it easy to deploy and manage applications on your own servers. Deis builds upon Docker and CoreOS to provide a lightweight PaaS with a Heroku-inspired workflow.

1.7.0 Summary

New Features

Deis has adopted an Open Roadmap and planning process

Most components use alpine:3.1 as a base, making Docker images smaller

Optional scripts allow for automatic host removal

All Heroku-compatible buildpacks were updated to recent versions

Deis example apps have been updated to current languages and frameworks

Randomly-generated app names won't collide with existing ones, and the vocabulary is expanded

deisctl config rm removes an existing deis configuration key

deis-controller can be customized to appear at a subdomain other than deis.

deis auth:passwd accepts a --username flag to allow an admin to update a user's password

deis-publisher can be profiled with Go's pprof package

EC2 provisioning supports custom volume sizes

deis-publisher exposes its config as flags

deis-controller doesn't use deprecated HTTP X- headers

Azure clusters automatically create a new discovery URL during provisioning

Improvements

deis-builder removes the git repo and related Docker images after deis destroy

deis-router won't keep hashing on an empty string

some etcd errors which were hidden are now properly raised at component start

deis logs -n won't raise an IOError when piped to head

deis builds:create requires an explicit Docker image tag

EC2 clusters use an EBS volume to store etcd data

docker.service now depends on its mount to exist before starting

better documentation for Deis backup/restore and for CoreOS upgrades

deisctl list no longer lists an app named deis-demo, for example

deis-swarm unit files are now fetched with deisctl refresh-units

deis config:push and config:pull validate the .env file syntax

Under the Hood

updated CoreOS to 647.2.0

deis honors requests' environment variables such as REQUESTS_CA_BUNDLE

Ceph uses a lower, more appropriate number of placement groups

deis-logger won't query etcd for every log line

deis-database runs backups in the background

deis-builder was reorganized around Docker image best practices

deis-controller's webEnabled key uses a safer numeric default of 0

custom clock sync logic in user-data was unneeded and was removed

$PORT logic was unused and removed from fleet

deis-builder silenced some benign pipefail errors on boot

deis-router returns a 404 for a non-existent app

For more details, please see CHANGELOG.md.

What's Next

Pluggable Storage Subsystem

Deis uses Ceph to provide a highly-available storage subsystem for stateful control plane components. While Ceph is the right default storage subsystem, it is tricky to operate and can result in control plane instability. Ceph should be optional, especially for users on AWS with direct access to services like S3.

See Pluggable Storage Subsystem at the Deis Roadmap for more detail.

TTY Broker

Today Deis cannot provide bi-directional streams needed for log tailing and interactive batch processes. By having the :ref:Controller drive a TTY Broker component, Deis can securely open WebSockets through the routing mesh.

See TTY Broker at the Deis Roadmap for more detail.

Scheduling and Orchestration

Today Deis uses Fleet for scheduling. Unfortunately, Fleet does not support resource-based scheduling, which results in poor cluster utilization at scale.

Fortunately, Deis is composable and can easily hot-swap orchestration APIs. Because the most promising container orchestration solutions are under heavy development, the Deis project is focused on releasing "technology previews".

These technology previews will help the community try different orchestration solutions easily, report their findings and help guide the future direction of Deis.

See Scheduling and Orchestration at the Deis Roadmap for more detail.

Community Shout-Outs

We want to thank the following Deis community members for creating GitHub issues, providing support to others, and working on various Deis branches:

@ainux4mrvce: deisctl start platform stuck at [email protected] : activating/start-post, deisctl fail to start at control plane builder.service, not able to start deisctl platform , unable to set deisctl config platform sshPrivateKey, not able to install deisctl platform , fail to install deisctl

@aledbf: Proposal ref(*): use alpine as replacement of ubuntu-debootstrap as base image, fix(builder): remove warning when docker uses the aufs driver, fix(database): remove postgres pid error from log, feat(publisher): add pprof to enable profiling, fix(router): check if there is certificates to generate, ref(test): update go version to 1.4.2

@bfosberry: deis controller throws 500 with badly padded key

@cddr: deisctl start platform takes very long time to complete

@chrisgeo: Deis Database lost relations

@cimnine: deis config:pull and config:push fail on empty lines

@cleblanc87: feat(contrib): AWS cli profile param

@colleen1: deis login - fix "bad request" message to be user readable

@croemmich: Ceph Issues After Upgrade to 1.6.0

@djmitche: fix(nonstring-default) numeric default for webEnabled, Suggest checking out a tag when getting the source

@ghostbar: One container didn't got an update of the configuration

@glenwong: config:push with .env doesn't handle export or double quotes

@glogiotatidis: Discussion: app unit publishing timeouts between publisher and router, Fleet unit reports active/running but still pulls image from registry

@haf: deis create fails on remote non-atomically, Installing swarm is taking too long/seems to fail, 'stateless plx' option

@iancoffey: feat(contrib): optional graceful shutdown

@ineu: Cached repo is not removed from builder when app is deleted, deis commands throw errors when being piped to head, Python errors unreadable in non-english locale, deis utility warnings should go to stderr

@jarcas-cdmon: Error in Deis REgister

@jbeard4: deis builder often leaves stale node modules for nodejs Heroku buildpack

@josephwinston: ssh-cert.key and password on Azure, Using DNS and Azure, azure-coreos-cluster fails with "socket.error: [Errno 61] Connection refused", deisctl start platform hangs at deis-store-monitor.service: activating/start-pre

@Joshua-Anderson: feat(deisctl): add config rm, feat(controller): Deprecate X prefixed headers, fix(controller): force uniqueness for default app name., docs(customizing_deis): clarify usage of registrationMode

@jwaldrip: Feature Request: Configurable Upchecks, Feature Request: Maintenance Mode, Display Error Page when no containers are available., docker.service needs to depend on the mount.

@kalbasit: Not able to install deis on Travis., fix(logger): gracefully handle a nil return from etcd watch, fix(logger): avoid hitting etcd for each log line, feat(publisher): expose config as flags, fix(deis): validate the syntax of the environment file

@nathansamson: Deis should have a (pliggbable) deploy hooks config method per app, deis-logger stopped working

@ngpestelos: deis-builder fails to set keys to etcd, fix(router): return 404 for non-existing app

@olalonde: deisctl stop platform stops at "could not find unit: deis-cache.service", deis run doesn't output anything, git push hangs at Launching..., Fixes issue #3764. Dont throw IOError when pipe closes.

@r4wr: Deis on Opennebula?

@sbuss: fix(client): let requests read env vars, s/deis push/deis pull/

@scottrobertson: Idea: update config on push, Are there any docs on how Deis handles servers going down?, Low disk space results in builder restart loop

@sedouard: feat(contrib/azure/azure-coreos-cluster): automatically create discovery url, fix(contrib/azure/azure-coreos-cluster): extend load balancer timeout

@simpsora: Provide container/unit name in journal, Unable to deploy when a config entry contains a space

@slack: high load + logger causes excessive traffic to etcd

@sstarcher: Ceph recovery slow, Unable to login to Deis Controller v1.6.0

@szymonpk: Does deis have disk self-cleaning mechanism?, Controler couldn't connect to database after node crash

@wenzowski: fix(router): avoid consistently hashing on empty string

The Deis community continues to grow, and Deis wouldn't be here without you! If we slighted your contribution to this release, please let us know so we can update.

How can you help?

Star our GitHub repository

Help spread the word about @opendeis on Twitter

Join the conversation in the #deis channel on Freenode

Voice your opinion on the Deis Roadmap by attending the monthly Release Planning Meeting

Pick an easy-fix or help wanted issue and start contributing!

Learn about other ways to get involved on our website.
Source code(tar.gz)
Source code(zip)
v1.6.1(May 15, 2015)
Deis v1.6.1 fixes problems with pip install deis, repairs a potential templating error in deis-router, and improves ntpd time sync for new clusters.

v1.6.0 -> v1.6.1

Fixes

13bd5f2 client: pin cryptography library at 0.8.2

5e09bff store: fix shared etcd key defaults

8349d06 router: check if there are certificates to generate

5dd03e8 contrib/coreos: remove custom clock sync logic

7c8c60b client: add requirements.txt to pypi distribution

575f68d store: lower number of placement groups

Source code(tar.gz)
Source code(zip)
v1.6.0(May 7, 2015)
The Deis project is excited to announce v1.6.0 with a technology preview of a Docker Swarm-based app scheduler and new deis ps:restart and deis users:list commands.

Deis is now supported by Engine Yard!

If you are coming from an earlier version of Deis, please read the "Upgrading Deis" documentation for details.

What is Deis?

Deis is an open source PaaS that makes it easy to deploy and manage applications on your own servers. Deis builds upon Docker and CoreOS to provide a lightweight PaaS with a Heroku-inspired workflow.

1.6.0 Summary

New Features

Docker Swarm is available for preview as an alternative to Fleet for scheduling application units

EC2 provisioning supports the Proxy Protocol, allowing WebSocket support for apps through an Elastic Load Balancer

SSL certificates in SAN format are now supported

deis users:list allows an admin to see all registered Deis users

deis ps:restart stops and starts all containers, all those of a process type, or a single container

deis config:push allows a --path argument to the .env file

deis logs accepts -n to limit the number of lines displayed

user registration can be enabled, disabled, or set to adminOnly

logging level in router can be customized

the number of worker processes in controller can be scaled

Improvements

deis register checks for a valid controller URL before continuing

logger exposes its config as feature flags, and is more extensible

Azure provisioning creates a load-balanced HTTPS endpoint

EC2 provisioning shows a countdown timer and reports any CloudFormation errors

git push errors are handled and reported more reliably

deis keys:add uses SSH fingerprints to determine uniqueness

registry determines S3 bucket name dynamically from etcd

moved route53-wildcard.py script to contrib/ec2 to help with DNS setup

make -C controller/ postgres creates a DB container for running unit tests

Under the Hood

bumped CoreOS to 633.1.0

updated Ceph to "Hammer" release

bumped confd to v0.9.0 in all components

builder now uses the official heroku/cedar:14 image

router updated to nginx 1.9 for stream module TCP support

added new C4 instance types to EC2 provisioning

added sfo1 and ams2 data centers to DigitalOcean provisioning

For more details, please see CHANGELOG.md.

What's Next

New Container Schedulers

Application containers require a resource-aware scheduler to improve cluster efficiency at scale and to alleviate issues with cluster balancing after the loss of a node. In addition to the Swarm technology preview in this release, prototyping is underway with Kubernetes and Mesos.

Deis will default to using fleet for both control plane and data plane scheduling for the foreseeable future.

Improved Test Infrastructure

We need to speed up test suites and increase test coverage to include operational aspects such as upgrades and HA. Hard work behind the scenes and invaluable community support are steadily improving the Deis test infrastructure.

Community Shout-Outs

We want to thank the following Deis community members for creating GitHub issues, providing support to others, and working on various Deis branches:

@ainux4mrvce: deisctl install platform

@aledbf: fix(test): obtain logs from deis-registry, ref(router): update confd to 0.90, feat(router): nginx 1.9.0. Remove third party tcp module, fix(store): change template to return ip address instead of :6789, fix(store): install lsb-release package

@ashaffer: Affinity arg is not working correctly

@azurewraith: enforceHTTPS=true causes client side issues

@babarinde: Deis controller Crashing, Deis domains:remove removing all domains, Deis application access and error logs not showing in v1.5, fix(controller) : remove domain

@bastilian: deisctl install platform hangs when < 3 nodes

@Blystad: deis-router error_log should have etcd configurable error level, fix(router): Unify timeout values, feat(router): customize error_log level via etcd

@chrisgeo: Azure: Investigate Router "[emerg] 16#0: bind() to 0.0.0.0:2222 failed (98: Address already in use)", Exception in logs on store-volume startup

@cleblanc87: Add profile parameter to provision-ec2-cluster.sh

@crigor: docs(troubleshooting_deis): use private key on ssh -i

@croemmich: Request: no downtime for apps during Deis platform upgrade, docs(contrib): add link to Docker S3 Cleaner

@daanemanz: chore(contrib/ec2): introducing c4 instance types

@davidcelis: Deis no longer produces app logs after an in-place upgrade

@davidlmorton: Expose nginx 'gunzip' configuration via etcd key (for Deis Router)

@dshafik: fix(client): Fix spacing of releases list

@econnell: bug(contrib): check for cloudfront errors on stack creation

@ecylmz: docs(managing_deis): add upgrade Deis clients for in-place upgrade

@eMxyzptlk: refactor(publisher): Refactor the publisher to be more idiomatic, The builder is leaving behind files.

@FreakinaBox: is running without wildcard sub domain possible?, Feature request: customize controller host name

@fretboarder: deis pull from local/private docker registry fails

@glogiotatidis: Apps built on Docker 1.6 -- Cannot deis pull: Invalid image ID, Cannot deploy, registry timeout, Add http check in addition to the port open check

@haf: Q: safe way to re-run cloud-init on existing machine?, config:set k=v with self-signed certs looks ugly, Errors from platform, Deis store - misc errors from prod, deis ps:scale cmd=3 spawns all on same node, motd error in my log, Pushing large app crashes host / platform

@hivearts: 'deis logs' not catching all app logs from docker containers

@ineu: masterLock and updating logic, CoreOS update docs are inexact, Add deis whoami to the help screen., deis:perms is not working in fresh installation, SSL is broken after upgrade to 1.5.1

@jannispl: deis-logger log drain format, deis-publisher should be less verbose -- add log_level setting

@johanneswuerbach: WebSockets on EC2, chore(router): update nginx to 1.8

@joshrtay: Minimum install of deis consumes a lot of disk space

@Joshua-Anderson: feat(Makefile): Add a command to start a local postgresql container for running unit tests, feat(controller): add a option to limit the number of log lines, feat(controller): Allow adminOnly registration, feat(controller): add users:list endpoint, feat(client): check controller before attempting to register. Fixes #3224

@jwaldrip: Registry Should be URL based, not IP, ec2: Consider using EBS volume for etcd, Feature Request: tail output of deis run, Cannot get application SSL to function, Error with deis certs:remove, Client warning of wrong version with latest cluster, Unable to register with https, deis run is not attaching stdin

@kingdonb: deis domains:add does not work and other problems "Welcome to nginx!"

@krancour: Proposal: Make Deis compatible with large-scale, production cluster architecture, get_image script doesn't work properly when dependent upon remote etcd, bug(router): remote etcd hosts not properly configurable, Clarification: how scalable is deis-registry?, bug(deisctl): are some services started twice?, documentation(registry): dependency on certain etcd keys is undocumented, Request: do not store domains in etcd:/deis/domains, Request: do not store user keys in etcd:/deis/builder/users, fix(registry): retrieve bucket name from etcd, docs(logger): change incorrect ref to db component

@nathansamson: Non existing app returns http 200, After upgrading to 1.5.1 deis uses lot more resources, Application SSL is not working when using multiple certs, Deis Builder resets key after upgrade / restart

@ngpestelos: Unable to push a new app in vagrant, HOST_IPADDR: parameter null or not set, deis-database: create_bucket failed after upgrading platform, deis-store-metadata won't start (missing ceph-mds), logs.papertrailapp.com drain type is not implemented, Unable to login to controller after upgrading to 1.6.0-dev, Unable to build 1.6.0-dev

@olalonde: /usr/bin/dock cannot allocate memory

@onbjerg: Post http://*:8000/v1/hooks/build: EOF, /home/git/project.git/hooks/pre-receive: No such file or directory, feat(client): add optional path to config:push

@payomdousti: Apache Aurora Support

@pdhar-tibco: deisctl start platform stuck at [email protected]: activating/start-post, INFO client.go:291: Failed getting response from http://localhost:4001/: unexpected EOF, fleet.service not starting on virtual box Non Vagrant Deis installation, Not able to run Deis::etcd on Amazon EC2, Error: 501: All the given peers are not reachable (Tried to connect to each peer twice and failed) [0]

@pmelmon: fix(controller) : fix regex for deis limits

@raphaelluchini: deis config:set numbers as string error

@rogerleite: deisctl tries to destroy app named "registry" when uninstalling platform

@sedouard: feat(contrib/azure/azure-coreos-cluster): add an https enddpoint on c… …reation, fix('contrib/azure/azure-coreos-cluster'): make this not found error more user friendly

@simpsora: Deploying app hangs at "Launching..."

@sitya: Deis elements should use etcd2's permission resources

@szymonpk: all routers stopped responding, can't execute apps:run

@tiaz: fix(contrib/ec2): improve timeout handling

@wenzowski: upgrade-fleet-091.service does not run after reboot

@zxcvbn97: Deis installation fails at [email protected]

The Deis community continues to grow, and Deis wouldn't be here without you! If we slighted your contribution to this release, please let us know so we can update.

How can you help?

Star our GitHub repository

Help spread the word about @opendeis on Twitter

Join the conversation in the #deis channel on Freenode

Pick an easy-fix or help wanted issue and start contributing!

Learn about other ways to get involved on our website.
Source code(tar.gz)
Source code(zip)
v1.5.2(Apr 22, 2015)
Deis v1.5.2 fixes SSL problems, reverts to confd polling to reduce server load, allows deletion of certificates with wildcard domains, and repairs deis domains:remove to delete only the requested domain.

v1.5.1 -> v1.5.2

Fixes

a4bf040 router: include deis.conf if no match with an SSL cert

1df8eea controller: allow "*" wildcard in cert REST URLs

7f6099c controller: return the correct domain from get_object

02b78a2 router: write out only if cert matches the path

8e960ca (all): use "confd --interval 5" instead of "--watch"

Source code(tar.gz)
Source code(zip)
v1.5.1(Apr 12, 2015)
Deis v1.5.1 fixes failed app builds still accepting a git push, and invalid redirects when enforceHTTPS is enabled on Deis routers.

v1.5.0 -> v1.5.1

Fixes

0866951 builder: exit 1 when gitreceive captures a build

64c0990 router: use nginx $host in HTTPS redirects

Source code(tar.gz)
Source code(zip)
v1.5.0(Apr 8, 2015)
The Deis project is stoked to announce v1.5.0, with application SSL support, a platform-wide log drain, the ability to use buildpacks from private repositories, and more.

If you are coming from an earlier version of Deis, please read the "Upgrading Deis" documentation for details.

What is Deis?

Deis is an open source PaaS that makes it easy to deploy and manage applications on your own servers. Deis builds upon Docker and CoreOS to provide a lightweight PaaS with a Heroku-inspired workflow.

1.5.0 Summary

New Features

you can now attach SSL certificates to your applications!

the deis client now utilizes a plugin architecture

deis config:push has been added

deis git:remote has been added

the --username, --password and --yes flags have been added to deis auth:cancel

private repository support has been added to the builder

a platform-wide log drain has been added

multiple profile support has been added to the client

LDAP support has been added to the controller

xip.io domains are now allowed with deis domains:add

Improvements

our test infrastructure now deploys on EC2, providing test functionality to EC2 changes

the integration tests can now run in parallel on https://ci.deis.io

the database now commences a recovery if it is started with stale data

cleaned up some errors in the builder

the client now properly reads the response from deis auth:cancel

the EC2 contrib scripts now loop until all instances have passed their health checks

CORS whitelisted headers have been updated

btrfs has been replaced with overlayfs in the latest version of CoreOS

the controller now ignores etcd "key missing" errors when deleting resources

Under the Hood

bumped CoreOS to 607.0.0

bumped Docker to 1.5.0

bumped confd to v0.8.0 in components to use the new --watch flag

bumped heroku-buildpack-ruby to v134

bumped fleet to v0.9.2

bumped python requests lib to 2.5.1

bumped gunicorn to 19.3.0

bumped python-dateutil to 2.4.1

bumped Sphinx to 1.3.1

bumped Django to 1.6.11 security release

For more details, please see CHANGELOG.md.

What's Next

Improved Test Infrastructure

We need to speed up test suites, eliminate the PR build queue, and increase test coverage to include operational aspects such as upgrades and HA. Hard work behind the scenes and invaluable community support are steadily improving the Deis test infrastructure.

New Container Scheduler

Application containers require a resource-aware scheduler to improve cluster efficiency at scale and to alleviate issues with cluster balancing after the loss of a node. Prototyping is well underway with Swarm and Kubernetes.

Deis will continue to support fleet for both control plane and data plane scheduling for the foreseeable future.

Community Shout-Outs

We want to thank the following Deis community members for creating GitHub issues, providing support to others, and working on various Deis branches:

@a-saad: Command 'run' fails when using a non-standard SSH port, feat(client): Add multiple profile support to the client

@aledbf: bug(controller): If is not possible to access etcd it should fail with an error, Proposal ref(builder): do not build slugbuilder and slugrunner locally, bug(test): during the test if the user app is stopped it continues running, Proposal chore(scripts): use shellcheck to verify shell scripts, Proposal feat(controller): allow deis pull from deis-registry, Proposal feat(controller): add fine-grain scheduling policy, bug(database): wal-e rewrote backup, Proposal ref(database): remove data container, bug(deisctl): list should not show apps with the pattern name ^deis-*, Proposal feat(cli): check the specified url before any command, Proposal ref(store): make ceph optional if the node is running in aws or azure, fix(publisher): use TTL in services application etcd directories, Proposal ref(Makefile): remove verbose golang compilation flag, fix(builder): return error message as string, feat(controller): disable swap usage if there is a memory limit, feat(test): remove hardcoded names. Extract journal logs from each app, feat(cloud-init): temporal fix for ntpd error and clock skew, Proposal ref(store): remove apache2 from ceph gateway, feat(setup-node.sh): remove user intervention setting up new nodes, feat(publisher): remove application when is stopped, feat(makefile): check that generated go binaries are statically linked, fix(router): allow customization of connection limits, fix(store): abort build in case of any error

@apps4u: multi tenancy proposal

@azurewraith: deis tags per process type, deis limits:set not persistent after upgrade

@chrisgeo: Azure Deployment Script Error: "WindowsAzureMissingResourceError"

@CptJason: Error response from daemon: No such container: deis-logspout

@croemmich: (builder) Can't set task name /dev/mapper/docker-202:25-3667816-pool, feat(router): set additional X-Forwarded headers

@daanemanz: feat(contrib/ec2/gen-json.py): split private and public subnets

@diddeb: Private key file is encrypted

@dylanz: Orphaned bridge interfaces w/ Docker, Customizing Controller domain, ELB healthchecks failing, Gateway & Builder restarts: All the given peers are not reachable, 503's from nginx

@elepedus: Docs: revise deisctl installation instructions

@gahissy: Domain name validation: w3.domain.com

@ghostbar: Save into a different remote name when deis remote already exists

@glogiotatidis: Controller Web: NoReverseMatch: u'rest_framework' is not a registered namespace, Controller: Domain remove, removes always the latest domain, fix(docs): Fix heroku-buildpack-php url, docs(contrib): Add deis-backup-service, fix(client): Older dates are incorrectly parsed as today and yesterday., fix(docs): Starting store-gateway needs @1.

@gvilarino: bug(services) deis apps:destroy doesn't delete root directory, database silently failing, killing controller, fix(azure): add support for Azure affinity groups

@haf: Failed retrieving config from controller (nodejs), Consider adding mono sample, How to handle large images?, Deis detects albacore as ruby app, Different behaviour between plain docker and git+Dockerfile, Deis cmd-line util: using SSL for self-signed certs --verify-ssl=false for all, Router: Serve content on example.com?, Security: open port for PostgreSQL with default script, Can't start a failed unit easily, Error from Etcd on full disk (crash and burn-mode), Docs on bootstrapping clusters?, Docs on using Deis to locally develop dockerfiles?, How to interact with the storage layer?, Can I extract time-series data easily from the platform?, Docs on etcd interaction?, How do I deploy a "resource" in 12-FA vocab?, Update docs' debugging of ceph in vagrant, fixes #3221 - service file surviving hard resets

@hellojustin: deis-store-* stuck in auto-restart loop after EC2 AutoScaling (Deis 1.3.0)

@hhff: Best Practices for Staging Environment

@ianblenke: PV clock drift causes more ceph havok, Unresponsive CoreOS 607 instance, Spontaneous kernel reboot, btrfs panics on 557.2.0, Submodules support without .git, Request: deis auth:passwd takes --user argument for admins to change user passwords, ssh key issue when using travis-ci/dpl deis deploy

@ineu: deis run should escape commands, deis run: Authentication failed, login and register hangs, ref(security): REJECT target uses port-unreachable

@joshmackey: If buildpack crashes, deis-builder won't accept any new pushes.

@Joshua-Anderson: deisctl not installing cache, fix(controller): Update CORS whitelisted request headers.

@jwaldrip: Unable to Delete Application

@kgk: change domain name and gateway fails to restart

@klaussilveira: Add command to rebuild app

@krancour: docs(logger): change incorrect ref to db component

@lorieri: naxsi rules included twice

@mikkoc: adding VMs to GCE cluster

@nathansamson: Deis builder should do best effort to keep git checkout, Deis limits isn't as forgiving as it could be

@Natsuke: deis-store-daemon: auto-restart, Builder: waiting for confd

@ngerakines: Setting a configuration value prevents further application pushes

@ngpestelos: deis-builder: git repositories persistence, chore(Makefile): bump dev-registry to use 0.9.1

@olalonde: Follow logs with deis logs?, 'Container type {} does not exist in application'.format(container_type)), Deis: minimal installation to reduce AWS cost, Docs: comparison with Flynn?, EC2 install: what are the volumes used for?, "Convenience DNS" to SSH into CoreOS cluster?, "failed retrieving config from controller" when pushing new Node.js project, Failed getting response from http://127.0.0.1:4001/: ssh: rejected: connect failed (Connection refused), ec2 setup cluster error: ImportError: No module named yaml, Question: going from docker-compose (fig) to deis?

@onbjerg: Cannot register (controller not found), Installing Deis on DigitalOcean prompts password

@phspagiari: feat(controller): Adding LDAP/AD auth support, Docs: Missing note for Vagrant users

@PierreKircher: proposal renaming of the clients, fix(contrib): preseed all images

@pjvds: feat(controller): add deis ps:stop command

@rjocoleman: Proposal: Platform-wide log drain

@romansergey: fix(database): Commence recovery if database is started with stale data container

@rvaralda: feat(builder): add ssh key variable to support private repositories, feat(deis client): add ssl-verify parameter to deis register command

@sitya: Container cannot start if etcd does not listen on 127.0.0.1 address

@wenzowski: should ssl endpoint docs explain how to get a signed cert?, Deis apps:destroy does not remove the git repo with the same name, redirect loop when enforceHTTPS is enabled on 1.4.1, feat(router): add optional query string affinity support, feat(docs): gcutil is deprecated; convert all calls to gcloud compute, feat(router): avoid regex-based taxing rewrites, fix(router) enforce HTTPS correctly when not behind an elb, fix(docker): wait for drive formatting to complete before mounting

@zyxia: All the given peers are not reachable (Tried to connect to each peer twice and failed)

The Deis community continues to grow, and Deis wouldn't be here without you! If we slighted your contribution to this release, please let us know so we can update.

How can you help?

Star our GitHub repository

Help spread the word about @opendeis on Twitter

Join the conversation in the #deis channel on Freenode

Pick an easy-fix or help wanted issue and start contributing!

Learn about other ways to get involved on our website.
Source code(tar.gz)
Source code(zip)
v1.4.1(Mar 6, 2015)
v1.4.0 -> v1.4.1

Fixes

cf61859 builder: revert "strip single quotes from BUILDPACK_URL"

45e7413 builder: revert "properly escape backticks"

0046494 builder: revert "properly escape backticks in envvars"

Source code(tar.gz)
Source code(zip)
v1.4.0(Mar 3, 2015)
The Deis project is proud to announce v1.4.0, with community-driven support for provisioning on Microsoft Azure, improvements to AWS provisioning, and a scalable Ceph store-gateway.

If you are coming from an earlier version of Deis, please read the "Upgrading Deis" documentation for details.

What is Deis?

Deis is an open source PaaS that makes it easy to deploy and manage applications on your own servers. Deis builds upon Docker and CoreOS to provide a lightweight PaaS with a Heroku-inspired workflow.

1.4.0 Summary

New Features

You can now provision Deis on Azure! - #2893

AWS provisioning scripts support internal Elastic Load Balancers - #3074

New AWS clusters use SSD Elastic Block Storage by default - #3065

Deis sends SIGTERM to shut down application processes gracefully - #3091

builder honors proxy settings in /etc/environment - #2825

logspout accepts custom date/time formats - #3037

router now logs http_host, upstream and request times - #2869

router allows optional HTTPS redirect - #3075

store-gateway can be scaled with deisctl scale - #2929

Any scalable component can be started or stopped with deisctl start|stop component@ - #3106

New documentation added about disk usage - #3021

New links added to Deis community projects! - #3114

Improvements

builder properly escapes backticks in environment variables - #3129

builder lets Docker-in-Docker choose its storage driver - #3039

controller queries fleet directly for app container state -#2993

controller removes timed-out fleet units from deis run - #3127

controller kills processes removed from a Procfile - #3068

deis domains has improved validation per RFC 1123 - #2991

deisctl journal|status are more helpful about global units - #3119

router disables SSLv3 (ref: CVE-2014-3566) if SSL is enabled - #3136

Under the Hood

CoreOS updated to 557.2.0 stable - #3048

go updated to 1.4.1+ - #3018

builder updated gradle and play buildpacks - #2989

controller updated djangorestframework to 3.0.5 - #3061

controller updated gunicorn to 19.2.1 - #3024

controller updated PostgreSQL driver psycopg2 to 2.6 - #3050

deisctl updated vendored fleet code to 0.9.0 - #3046

registry updated docker-registry code to v0.9.1 - #3109

For more details, please see CHANGELOG.md.

What's Next

Application SSL Support

Thanks to community discussion and effort, work on application SSL support has begun. What remains is an agreement on the formal specification following Heroku and an updated implementation. Once merged, users will be able to install custom private keys and SSL certificates to expose HTTPS applications using the Deis router.

Improved Test Infrastructure

We need to speed up test suites, eliminate the PR build queue, and increase test coverage to include operational aspects such as upgrades and HA. Hard work behind the scenes and invaluable community support are steadily improving the Deis test infrastructure.

New Container Scheduler

Application containers require a resource-aware scheduler to improve cluster efficiency at scale and to alleviate issues with cluster balancing after the loss of a node. Prototyping is well underway with Swarm and Kubernetes.

Deis will continue to support fleet for both control plane and data plane scheduling for the foreseeable future.

Community Shout-Outs

We want to thank the following Deis community members for creating GitHub issues, providing support to others, and working on various Deis branches:

@achannarasappa: Invalid registry endpoint error

@aledbf: Error in upgrading-deis.rst, question(builder): the published image uses the same ssh keys?, bug(go): some binaries are not static, fix(go): go 1.4 static binaries, docs(contrib): add link to new community project, feat(cloud-init): check if deisctl does not exists before install it

@anoopknayak: Customized deis router times out at times, Deis logs not consistent

@apps4u: unable to provision AWS ec2 , can not start

@ashaffer: List environment variables in alphabetical order, Provide a way to install packages when using the buildpack workflow

@Blystad: Proposal: Increase SSL Security in deis-router

@cray0000: Out of disk space on machine running deis-builder

@croemmich: builder - wrong filesystem?

@daemonza: Logout REST api call for the controller feature request

@dorkusprime: Getting inconsistent 403 errors from 'deis domains'

@glogiotatidis: Deis should check if container's port is accepting connections before adding it to the pool, deis run cannot handle large output, Need a way to stop one-off stale commands

@gpolyn: Failed to parse: proxyip:port at 'Register User' step (with Vagrant)

@grengojbo: Deis builder is not start

@gvilarino: (azure) builder doesn't start

@ianblenke: Deis cannot build git submodules , New Dockerfile+Procfile behavior broken, 501: All the given peers are not reachable (Tried to connect to each peer twice and failed) [0]

@ineu: Proposal: Bind deis containers to internal IPs, Questions on increase-nf_conntrack-connections.service, "Multipack app" cached?, deis-builder doesn't honor registry protocol, Vagrant problem: direct box file path

@jasoncox: Consider datetime format to ISO8601

@johanneswuerbach: CI: Docker networking issue?, feat(router): Removed X-Deis-Upstream, feat(deisctl): start / stop all installed units, feat(store): Scalable store-gateway, chore(controller): No sudo for deis, chore(builder): Updated gradle and play buildpack, feat(builder): Try shallow cloning buildpack repos

@joshmackey: NPM lock issue.

@jwarzech: Installing deis client on OSX 10.7.5

@karlo57: fix(publisher): remove unnecessary BUILD_IMAGE variable from Makefile

@kinessscu: deis-builder: server.go:110 HTTP Error: statusCode=500 Invalid registry endpoint

@lorieri: Update README.md, feat(builder+docker+user-data): proxy settings, feat(router) nginx status; log http_host, upstream and request times

@mhahn: Add root domain to an application, a way to pull configs into another application, feat(deis/config): remove "===" when listing configs with --oneline

@mvanholsteijn: deis pull fails with No Tag Found

@nekrox: How can isolate Control Plane and Router Mesh

@ngpestelos: unable to start deis-builder , chore(builder, logger, logspout): remove unused references to BUILD_IMAGE

@phspagiari: Proposal: LDAP/AD auth on controller, Problems with Deis in vagrant installation

@rjocoleman: Proposal: deis cli discrete git remote command, Proposal: Self updating Deis CLI

@simpsora: Unable to start arbitrary Procfile entries

@theaboutbox: docs(logspout): Fix remote syslog example

@timfpark: Builder is quitting after pushing image to private registry, Proxying web request causes timeout when target is another Deis application, Azure: Client hangs on "Launching app..." but app is successfully launched

@wenzowski: Rolling restarts with deis ps:restart, SIGTERM on exceeded memory quota, pass env vars to buildpack, feat(store-admin): add gnu watch, builder re-generating SSH keys when jumping hosts, Nginx 5-tuple microflow affinity load balancing to enable arbitrary TCP, Graceful shutdown with SIGTERM, feat(scheduler): graceful shutdown with SIGTERM, fix(router): disable SSLv3 CVE-2014-3566

@withinboredom: Failure in deis registry

@yekeqiang: command fails: deisctl config platform set sshPrivateKey=~/.ssh/deis

The Deis community continues to grow, and Deis wouldn't be here without you! If we slighted your contribution to this release, please let us know so we can update.

How can you help?

Star our GitHub repository

Help spread the word about @opendeis on Twitter

Join the conversation in the #deis channel on Freenode

Pick an easy-fix or help wanted issue and start contributing!

Learn about other ways to get involved on our website.
Source code(tar.gz)
Source code(zip)
v1.3.1(Feb 5, 2015)
v1.3.0 -> v1.3.1

Fixes

71bd706 cache: use godep to build binaries

Source code(tar.gz)
Source code(zip)
v1.3.0(Feb 3, 2015)
The Deis project is proud to announce v1.3.0, which includes more ways to debug your cluster, code quality improvements to the controller and security enhancements to the builder.

Important: This release includes a CoreOS update for the CVE-2015-0235 glibc fix. All Deis users are encouraged to upgrade their host machines to CoreOS 522.6.0 or later.

If you are coming from an earlier version of Deis, please read the "Upgrading Deis" documentation for details.

What is Deis?

Deis is an open source PaaS that makes it easy to deploy and manage applications on your own servers. Deis builds upon Docker and CoreOS to provide a lightweight PaaS with a Heroku-inspired workflow.

1.3.0 Summary

New Features

The optional deis-store-admin service helps with Ceph troubleshooting

builder disallows simultaneous git push on one app

builder runs application builds as a non-root user

controller REST views are updated and simplified

controller consistently returns errors as JSON

controller consistently returns 403 for permission errors

Improvements

Vagrant VMs default to 2GB, since less can lead to docker mem alloc errors

Dockerfiles include ENV DEIS_RELEASE to prevent overlap in docker images

etcd discovery URL uses the right key on GCE

a Procfile can override a buildpack's default_process_types

controller tracks create and start separately for better error handling

controller validates uploaded key material

logger builds with godep, like other Go components

router has docs and deisctl fixes for installing SSL

Under the Hood

CoreOS updated to 522.6.0 stable

controller bump API version to 1.1.2

controller updated Django REST Framework to 3.0.3

controller updated django-guardian to 1.2.5

controller updated paramiko to 1.15.2

controller updated python-dateutil to 2.4.0

controller updated static wsgi library to 1.1.1

slugbuilder updated heroku-buildpack-php to v57

For more details, please see CHANGELOG.md.

What's Next

Application SSL Support

Thanks to community discussion and the efforts of @jparkerCAA in pull request 2570, application SSL support should land in Deis soon. What remains is an agreement on the formal specification following Heroku and an updated implementation. Once merged, users will be able to install custom private keys and SSL certificates to expose HTTPS applications using the Deis router.

Improved Test Infrastructure

We are in the process of planning another round of improvements to our test infrastructure. The goals are to speed our test suites, eliminate the build queue and increase coverage to include operational aspects like upgrades and HA.

New Container Scheduler

We are evaluating a new, resource-aware scheduler for application containers in the data plane to improve cluster efficiency at scale and to alleviate issues with cluster balancing after the loss of a node. Prototyping is ongoing with Mesos, Kubernetes, and Docker Swarm.

Deis will continue to support Fleet for both control plane and data plane scheduling for the foreseeable future.

Community Shout-Outs

We want to thank the following Deis community members for creating GitHub issues, providing support to others, and working on various Deis branches:

@aledbf: user-data error in service debug-etcd.service, Proposal: publish master version every night to docker, Proposal: allow custom log level in components, REST errors question, feat(builder): disable simultaneous push in the same repository, fix(security): increase max conntrack connections, fix(builder): exit if an error occur compiling go, fix(database): update wal-e because error in python-daemon, feat(docker): add env DEIS_RELEASE, feat(slugbuilder): update nodejs buildpack to v64 (yoga release)

@babarinde: Push Failure after Restoration of from Backup, CoreOS nodes not connected on GCE, fix (contrib/gce/create-gce-user-data): replace discovery_url with discovery

@bfosberry: processes removed from Profile cannot be stopped, builder error - unexpected eof in archive

@Blystad: request: Custom 502 error page on per-application basis, ref(builder): Remove use of root in gitreceive, feat(controller): add hostname exposing to units, feat(contrib/ec2): Set ELB timeout to 1200s

@daemonza: Cannot pull image - tag not found

@glogiotatidis: s3cmd fails to copy registry, docs(managing_deis): Typo fix., feat(client): Add controller to whoami command.

@ianblenke: deis-controller generated fleet units should [X-Fleet] Conflicts with the others of the same app

@iansmith: surprising effect of changing from go-buildpack to Dockerfile

@jannispl: cluster is working, but filling logs with confd errors

@jetole: deis blocks domain creation under improper circumstances

@jgmize: docs(system-requirements): Fix broken link

@Jim-Holmstroem: fix(contrib/coreos) etdcd_request_timeout value type

@johanneswuerbach: aws: consider reverting to instance storage

@karlo57: Waiting for ceph gateway

@marzolfb: All the given peers are not reachable

@mcano: feat(client): add flag to disable SSL certificate verification

@mgartner: AWS instances being terminated by autoscaling group, ceph-osd using utilizing 20-50% CPU continuously, AWS autoscaler terminated then restarted node - how to get cluster back to normal?

@mhahn: config value escaping

@mvgijssel: Using deployment keys for private repositories with deis builder

@nagliyvred: Unable to add a node to a cluster or restart an existing one (GCE)

@nathansamson: Feature: Allow System & Application monitoring based on Graphite

@ngpestelos: Key not found (/deis/logs), etcd: inconsistent value for /deis/registry/host, builder: unable to restart builder if cedarish fails to download, deis-controller too many clients, How to handle a host running out of space, git push is rejected after upgrading builder, fix(database): increases max_connections to 250, chore(controller): Fix typo on README.md

@prateek121: Deis Registration failed

@rjocoleman: Proposal: Self updating Deis CLI

@romansergey: fix(controller): adds migration to get rid of dockerfile's u'False' valu...

@SkyWriter: Adding process to the Procfile does not create it

@suquant: Database service recognition failed (boto timeout)

@synaptics: Custom HTTP request headers not being passed in to web app (v1.2.1)

@theaboutbox: docs(ec2): Document update_ec2_cluster.sh

@timfpark: No Procfile -> obscure failure error

@withinboredom: Unable to perform deis push, deis builder service hung in activating/start-post (failure retrieving image), Uninstall Platform leaves [email protected] hanging around, Deis hangs in launching state though launced successfully, Unable to register

@xishuixixia: Chinese Version of Deis Documentation

The Deis community continues to grow, and Deis wouldn't be here without you! If we slighted your contribution to this release, please let us know so we can update.

How can you help?

Star our GitHub repository

Help spread the word about @opendeis on Twitter

Join the conversation in the #deis channel on Freenode

Pick an easy-fix or help wanted issue and start contributing!

Learn about other ways to get involved on our website.
Source code(tar.gz)
Source code(zip)

Deis v1, the CoreOS and Docker PaaS: Your PaaS. Your Rules.

Related tags

Overview

Deis v1 PaaS

Installing Deis v1

Troubleshooting

Contributing

License

Comments

Motivations

Design

Logger

Controller

deisctl

Goals

Code Changes

Issues to Note

Testing

Overview of Changes

How to Test

Test backwards-compat for existing applications

Install a Fresh Cluster from Master

Create an Application

Perform an in-place Upgrade

Check Backwards Compatibility

Test New Functionality

Releases(v1.13.4)

v1.13.4(Jan 19, 2017)

v1.13.3 -> v1.13.4

Fixes

Documentation

Maintenance

v1.13.3(Aug 22, 2016)

v1.13.2 -> v1.13.3

Features

Fixes

Documentation

Maintenance

v1.13.2(Jun 17, 2016)

v1.13.1 -> v1.13.2

Fixes

Documentation

Maintenance

v1.13.1(May 6, 2016)

v1.13.0 -> v1.13.1

Fixes

Maintenance

v1.13.0(Apr 6, 2016)

What is Deis?

v1.13.0 Summary

New Features

Improvements

Under the Hood

Community Shout-Outs

How can you help?

v1.12.3(Feb 11, 2016)

v1.12.2 -> v1.12.3

Maintenance

v1.12.2(Dec 1, 2015)

v1.12.1 -> v1.12.2

Fixes

Documentation

Maintenance

v1.12.1(Nov 10, 2015)

v1.12.0 -> v1.12.1

Fixes

Maintenance

v1.12.0(Nov 4, 2015)

What is Deis?

1.12.0 Summary

New Features

Improvements

Under the Hood

Community Shout-Outs

How can you help?

v1.11.2(Oct 21, 2015)

v1.11.1 -> v1.11.2

Fixes

v1.11.1(Oct 11, 2015)

v1.11.0 -> v1.11.1