fhempy (BETA)
fhempy allows the usage of Python 3 (NOT 2!) language to write FHEM modules. Python 3.7 or higher is required, therefore I recommend using buster.
This repository includes following working modules:
| Module | Description |
|---|---|
| ble_presence | Presence detection incl. RSSI for Bluetooth Low Energy |
| ble_reset | Resets all Bluetooth interfaces every X hours |
| bt_presence | Presence detection incl. RSSI for Bluetooth |
| discover_mdns | Discover mDNS (e.g. googlecast) devices |
| discover_ble | Discover Bluetooth LE devices |
| discover_upnp | Discover UPnP devices |
| dlna_dmr | Control DLNA MediaRenderer devices |
| eq3bt | Control EQ3 Bluetooth thermostat |
| erelax_vaillant | Control eRelax Vaillant |
| esphome | Installs and starts the ESP Home dashboard for easy ESP Home device management |
| gfprobt | Control GF Pro Bluetooth irrigation control |
| googlecast | Control Cast devices and stream Spotify |
| helloworld | Hello World example for developers to start writing their own module |
| meross | Control Meross devices |
| miflora | Xiaomi BLE Plant Sensor |
| miio | Control Xiaomi WiFi devices |
| mitemp | Xiaomi BLE Temperature/Humidity Sensor |
| nespresso_ble | Nespresso Bluetooth coffee machine |
| object_detection | TensorFlow Lite object detection |
| ring | Ring doorbell/chime/cam |
| seatconnect | Control your Seat/Cupra car |
| spotify | Control Spotify Connect and use FHEM as Spotify Connect player |
| skodaconnect | Control your skoda car |
| tuya | Not recommended: Control tuya devices via local key |
| tuya_cloud | Recommended: Control all tuya devices via cloud incl. real-time updates |
| warema | Control Warema devices |
| wienerlinien | Wiener Linien departure times |
| xiaomi_gateway3 | Xiaomi Gateway V3 (only V3!) |
| xiaomi_tokens | Retrieve all Xiaomi Tokens from Cloud |
Installation
Python >=3.7 is required, Python 2 won't work!
Console
Debian 11 (Bullseye)
Copy & paste this command if you are running Debian Bullseye.
sudo apt install python3 python3-pip python3-dev libffi-dev libssl-dev libjpeg-dev zlib1g-dev autoconf build-essential libglib2.0-dev libdbus-1-dev bluez libbluetooth-dev git libprotocol-websocket-perl
Others
Use the following 2 commands if you run Debian 10 (Buster) or older (e.g. stretch, jessie, ...).
sudo apt install python3 python3-pip python3-dev libffi-dev libssl-dev libjpeg-dev zlib1g-dev autoconf build-essential libglib2.0-dev libdbus-1-dev bluez libbluetooth-dev git
sudo cpan Protocol::WebSocket
FHEM
update add https://raw.githubusercontent.com/dominikkarall/fhempy/master/controls_pythonbinding.txt
update
define local_pybinding BindingsIo fhempy
All further requirements are installed automatically via pip as soon as the specific module is used the first time.
Usage in FHEM (examples)
This are just a few examples for some modules, please see the modules readme linked in the table above for more details
define castdevice fhempy googlecast "Living Room"define eq3bt fhempy eq3bt 00:11:22:33:44:66:77define upnp fhempy discover_upnp
fhempy peers (e.g. extend Bluetooth range)
fhempy allows to run modules locally (same device as FHEM runs on) or on remote peers. Those remote peers only make sense if you want to extend the range of bluetooth or want to distribute the load of some modules to other more powerfull devices (e.g. video object detection).
Peer setup (short)
Only on remote peers, do not run this commands on the FHEM instance.
### WARNING: DO THIS COMMAND ONLY ON REMOTE PEER, NOT ON YOUR FHEM INSTANCE ###
pip3 install --upgrade fhempy
# systemd service installation
curl -sL https://raw.githubusercontent.com/dominikkarall/fhempy/master/install_systemd_fhempy.sh | sudo -E bash -
Peer setup (long)
The following steps are only needed if you want to install fhempy on a remote peer, you should not run them on your FHEM installation.
- Install fhempy with user pi:
pip3 install --upgrade fhempy - Make sure your main fhempy instance (within FHEM) is running
- Test fhempy by just running it with user pi, type
fhempyand enter. Wait a few seconds until it gets discovered and you see the incoming FHEM connection. - Systemd configuration for autostart
curl -sL https://raw.githubusercontent.com/dominikkarall/fhempy/master/install_systemd_fhempy.sh | sudo -E bash -- fhempy is run with user pi, you can change that in the fhempy.service file in /etc/systemd/system/
- FHEM configuration
- The remote peer is autodiscovered and will show up in FHEM as device e.g. fhempy_remote_192_168_1_50
- You can move any device to the remote peer by changing the IODev of the device.
- If autodiscovery doesn't work (it's based on zeroconf), you can define it with
define fhempy_remote_IP BindingsIo IP:15733 fhempy
Log file
journalctl -u fhempy.service -f
Update
Just do set remote_pybinding update and the remote peer will install the new package via pip and restart afterwads.
Functionality
10_BindingsIo
This module is a DevIo device which builds a language neutral communicaton bridge in JSON via websockets.
10_fhempyServer
This module just starts the fhempy server instance
10_fhempy
This module is used as the bridge to BindingsIo. It calls BindingsIo with IOWrite.
fhempy
This is the Python server instance which handles JSON websocket messages from BindingsIo. Based on the message it executes the proper function and replies to BindingsIo via websocket.
Call flow
This example shows how Define function is called from the Python module.
- define castdevice fhempy googlecast "Living Room"
- fhempy sends IOWrite to BindingsIo
- BindingsIo sends a JSON websocket message to fhempy
- fhempy loads the corresponding module (e.g. googlecast), creates an instance of the object (e.g. googlecast) and calls the Define function on that instance
- Define function is executed within the Python context, as long as the function is executed, FHEM waits for the answer the same way as it does for Perl modules
- Python Define returns the result via JSON via websocket to BindingsIo
At any time within the functions FHEM functons like readingsSingleUpdate(...) can be called by using the fhem.py module (fhem.readingsSingleUpdate(...)). There are just a few functions supported at the moment.
Write your own module
Check helloworld example for writing an own module. Be aware that no function which is called from FHEM is allowed to run longer than 1s. In general no blocking code should be used with asyncio. If you want to call blocking code, use run_in_executor (see googlecast code).
7 Mar 17, 2022
1 Nov 20, 2021
4.5k Dec 30, 2022
66 Nov 19, 2022
6 Jun 07, 2022
11 Jan 07, 2023
12 Aug 16, 2021
71 Dec 20, 2022
520 Dec 31, 2022
484 Jan 01, 2023
3.4k Jan 08, 2023
4 Aug 22, 2022
3 Feb 16, 2022
3 Mar 19, 2022
3 Oct 25, 2022
5 Apr 29, 2022
10 Jun 08, 2021
1 Oct 23, 2021
47 Oct 31, 2022
11 Jan 01, 2023