Python Indent
Correct python indentation in Visual Studio Code. See the extension on the VSCode Marketplace and its source code on GitHub.
Please consider donating via paypal or on GitHub Sponsors if you find this extension useful and have some spare cash!
How it works
Every time you press the Enter key in a python context, this extension will parse your python file up to the location of your cursor, and determine exactly how much the next line (or two in the case of hanging indents) should be indented and how much nearby lines should be un-indented.
There are three main cases when determining the correct indentation, described below.
Between bracket pairs
In cases when you have your cursor between an open bracket (one of [({) and its closing bracket pair (the corresponding one of })]), this extension will keep subsequent lines indented just to the right of where it was opened:
data = {'a': 0,
| # <- pressing enter should put your cursor at the "|"
| # <- This is where default VS Code puts your cursor.
Even heavily nested brackets are handled:
data = {'a': 0,
'b': [[1, 2],
| # <- match the more recently opened [ instead of the {
| # <- default behavior of VS Code.
data = {'a': 0,
'b': [[1, 2],
[3, 4]],
| # <- since the lists are all closed, go back to the { position
| # <- default behavior of VS Code.
data = {'a': 0,
'b': [[1, 2],
[3, 4]],
'c': 5}
| # <- go back to indentation level before any brackets were opened
| # <- default behavior of VS Code.
In the full example below, default VS Code required nine extra key presses (three tab's, two space's, and four backspace's) to match the automatic indentation of this extension.
data = {'a': 0,
'b': [[1, 2],
[3, 4]],
'c': 5}
done(data)
Hanging indents
When you have opened a bracket, but not yet inserted any content, pressing Enter will create a hanging indent, matching the base behavior of VS Code.
result = my_func(
| # <- your cursor should end up here
) # <- the closing bracket should end up here
You can use the setting useTabOnHangingIndent to make it so that when you are done typing you can simply press Tab to be taken to the closing bracket.
If there is content to the right of your cursor when you press Enter, then this extension falls back on just indenting by your set tab size.
# The "|" is your cursor's location.
result = my_func(|x, y, z)
# and when you press enter...
result = my_func(
|x, y, z)
If you never want to have the closing bracket end up on its own line (i.e. you always want to just indent by the set tab size), use the keepHangingBracketOnLine configuration setting. Warning: This may cause confusing indentation with function definitions as the argument list and the function code may end up at the same indentation level.
It's not often used, but a backslash to continue a line will also result in the next line being indented.
my_long_calculation = 1234 + \
5678
Keywords
Some keywords in python imply certain indentation behaviors. For example, if there is a return statement, then we know the next line can be un-indented (or dedented) since no statements can follow a return in the same code block. Other keywords that follow the same pattern are pass, break, continue, and raise
Similarly, if there is an else: on the current line, that the current line needs to be dedented, and the next line needs to be indented relative to the new position of the else:. Other keywords that follow the same pattern are elif
, except
, and finally:. Some examples are shown below.
if True:
pass
else:|
# and when you press enter...
if True:
pass
else:
|
But if you have manually changed the indentation, then the extension should not change it for you:
if True:
if True:
pass
else:|
# and when you press enter, do NOT dedent!
if True:
if True:
pass
else:
|
# Or even more nested
if True:
if True:
if True:
pass
else:|
# and when you press enter, still do NOT dedent
if True:
if True:
if True:
pass
else:
|
Extending comments
If (and only if) you press Enter while your cursor is in the middle of a comment, then the next line will automatically be made into a comment.
# As always, the "|" indicates your cursor
def f():
# This function is |gonna be REAL good!
def f():
# This function is
# |gonna be REAL good
Trimming whitespace lines
You can trim whitespace from lines that contain only whitespace by using the trimLinesWithOnlyWhitespace configuration setting (the default is to not trim whitespace in this way). This setting brings the behavior closer to native VSCode behavior.
# In the below code, the character "·" represents a space.
def f():
····|
# The default of false preserves whitespace
def f():
····
····|
# Setting trimLinesWithOnlyWhitespace = true will trim the whitespace.
def f():
····|
Why is it needed?
There are many related issues on GitHub ([1], [2], [3], [4], [5]) asking for improved python indentation in VS Code. It seems like the maintainers of the python extension at microsoft are not prioritizing indentation, since there has been no progress in the years since it was first asked for.
Caveats
Known caveats are listed below.
- Using tabs (
\t) for your indentation will not work. - If your python code is not correctly formatted, you may not get correct indentation.
- The extension works by registering the
Enterkey as a keyboard shortcut. The conditions when the shortcut is triggered have been heavily restricted, but there may still be times this extension is unexpectedly overridingEnterbehavior.- Specifically,
vimrelated plugins seem to require special attention. See thewhenclause in package.json.
- Specifically,
If you experience any problems, please submit an issue, or better yet a pull request.
Release Notes
See the change log.
Developing
See the developer docs for pointers on how to develop this extension.
181 Dec 04, 2022
2 Sep 05, 2022
1 Dec 17, 2021
7k Jan 02, 2023
7.3k Jan 08, 2023
10 Oct 10, 2022
6 Jul 08, 2022
6 Oct 29, 2021
110 Dec 04, 2022
26 Nov 15, 2022
7 Jan 26, 2022
146 Dec 07, 2022
62 Dec 14, 2022
2 Dec 31, 2022
3k Jan 04, 2023
257 Dec 24, 2022
4 Nov 03, 2022
1 Nov 05, 2021
1.3k Jan 07, 2023
3 Aug 26, 2022