ENC28J60 Ethernet chip driver for MicroPython (RP2)

Last update: Nov 16, 2022

Overview

micropy-ENC28J60

ENC28J60 Ethernet chip driver for MicroPython v1.17 (RP2)

Rationale

ENC28J60 is a popular and cheap module for DIY projects. At the moment, however, there is no driver for the MicroPython environment. The Python implementation seems easy for further improvements and self adaptation.

Installation

Copy enc28j60.py to your board into /enc28j60 directory.

Wiring

Wiring requires pins for SPI: SCK, MISO, MOSI and ChipSelect and optionally Interrupt. Example wiring that uses SPI1 bus:

ENC28J60 Module	Rassperry Pi Pico	Notes
VCC	3V3	requires up to 180 mA
GND	GND
SCK	GP10	SPI1 SCK
SI	GP11	SPI1 MOSI/TX
SO	GP8	SPI1 MISO/RX
CS	GP13	SPI1 CSn
INT	GP15	Optional

Example code

Packet transmission

Example of packet transmission to broadcast ethernet address:

from machine import Pin, SPI
from enc28j60 import enc28j60

spi1 = SPI(1, baudrate=10000000, sck=Pin(10), mosi=Pin(11), miso=Pin(8))
eth = enc28j60.ENC28J60(spi1, Pin(13))
eth.init()

srcMac = eth.getMacAddr()
tgtMac = bytearray([0xFF,0xFF,0xFF,0xFF,0xFF,0xFF])
payLoad = bytearray(64)
pktType = bytearray([(len(payLoad) >> 8) & 0xFF, len(payLoad) & 0xFF])

eth.SendPacket([tgtMac, srcMac, pktType, payLoad])

Packet reception

Example of packet reception:

from machine import Pin, SPI
from enc28j60 import enc28j60

spi1 = SPI(1, baudrate=10000000, sck=Pin(10), mosi=Pin(11), miso=Pin(8))
eth = enc28j60.ENC28J60(spi1, Pin(13))
eth.init()

pkt = bytearray()

while eth.GetRxPacketCnt():
	eth.ReceivePacket(pkt)
	print('srcMac:', ":".join("{:02x}".format(c) for c in pkt[6:12]))

MPY tool - manage files on devices running MicroPython

mpytool MPY tool - manage files on devices running MicroPython It is an alternative to ampy Target of this project is to make more clean code, faster,

5 Aug 17, 2022

Controlling fireworks with micropython

Controlling-fireworks-with-micropython How the code works line 1-4 from machine

1 Jan 8, 2022

Pylorawan is a Micropython wrapper for lorawan devices from RAK Wireless.

pylorawan Pylorawan is a Micropython wrapper for lorawan devices from RAK Wireless. Tested on a Raspberry PI Pico with a RAK4200(H) Evaluation Board (

3 Nov 4, 2022

BMP180 sensor driver for Home Assistant used in Raspberry Pi

BMP180 sensor driver for Home Assistant used in Raspberry Pi Custom component BMP180 sensor for Home Assistant. Copy the content of this directory to

1 Dec 17, 2021

CircuitPython Driver for Adafruit 24LC32 I2C EEPROM Breakout 32Kbit / 4 KB

Introduction CircuitPython driver for Adafruit 24LC32 I2C EEPROM Breakout Dependencies This driver depends on: Adafruit CircuitPython Bus Device Regis

0 Dec 20, 2021

Python module for the qwiic serial control motor driver

Qwiic_SCMD_Py Python module for the qwiic motor driver This python package is a port of the existing SparkFun Serial Controlled Motor Driver Arduino L

6 Dec 6, 2022

Micropython-wifimanager-esp8266 - Simple Wifi Manager for ESP8266 using MicroPython

micropython-wifimanager-esp8266 Simple Wifi Manager for ESP8266 using MicroPytho

1 Jan 4, 2022

MicroPython driver for 74HC595 shift registers

MicroPython 74HC595 A MicroPython library for 74HC595 8-bit shift registers. There's both an SPI version and a bit-bang version, each with a slightly

17 Nov 29, 2022

SPI driven CircuitPython driver for PCA9745B constant current LED driver.

Introduction THIS IS VERY MUCH ALPHA AND IN ACTIVE DEVELOPMENT. THINGS WILL BREAK! THIS MAY ALSO BREAK YOUR THINGS! SPI driven CircuitPython driver fo

1 Jan 14, 2022

A Proof-of-Concept Layer 2 Denial of Service Attack that disrupts low level operations of Programmable Logic Controllers within industrial environments. Utilizing multithreaded processing, Automator-Terminator delivers a powerful wave of spoofed ethernet packets to a null MAC address.

Automator-Terminator A Proof-of-Concept Layer 2 Denial of Service Attack that disrupts low level operations of Programmable Logic Controllers (PLCs) w

25 Oct 10, 2022

A Chip-8 emulator written using Python's default libraries

Chippure A Chip-8 emulator written using Python's default libraries. Instructions: Simply launch the .py file and type the name of the Chip8 ROM you w

5 Sep 27, 2022

Control the classic General Instrument SP0256-AL2 speech chip and AY-3-8910 sound generator with a Raspberry Pi and this Python library.

GI-Pi Control the classic General Instrument SP0256-AL2 speech chip and AY-3-8910 sound generator with a Raspberry Pi and this Python library. The SP0

8 Dec 15, 2021

CircuitPython library for the CH559 USB to Serial chip

Comments

Using your lib with a pico

Hi I'm having a bit of trouble - I'm using a Pc running PacketSender in UDP mode, testing the Packet reception script on Pico

I think I should be seeing the rxBuf in the Thonny shell, I see this :-

MAC ADDR: 0e:5f:5f:20:58:28 ENC28J60 revision ID: 0x00

but thats all, on the PacketSending I'm sending out "thing" every second.

The only difference is that I'm using the instance of SPI with this detail

spi1 = SPI(0, baudrate=10000000, sck=Pin(6), mosi=Pin(7), miso=Pin(4)) eth = enc28j60.ENC28J60(spi1, Pin(5))

My enc is connected to those pins.

Does it have to be on SPI(1,........) ?

(the lib file is on the Pico in the /enc28j60 folder)
question

opened by ph1lj-6321 5
Question regarding the recieving and print of data

Hi Looking at and testing your 'Packet reception' script - when I run this code (altered the SPI pins to suit), all I see is the following -

I'm testing it by continuously sending out a data stream from PacketSender

I'm using Port 7 After your line rxBuf = .......

I simply added print(rxBuff)

Can you provide any hints ?

I was hoping to see the data

no stuff is not good what I'm sending at 100ms intervals - somewhere in the Rx packet

opened by ph1lj-6321 2

Releases(v1.0.1)

v1.0.1(Feb 12, 2022)
Improved time performance by using prealocated buffers

Added option for half/full duplex selection (default full duplex )

Const definitions for return error codes

Improved examples

Source code(tar.gz)
Source code(zip)
v1.0.0(Jan 7, 2022)

First release.
Source code(tar.gz)
Source code(zip)

ENC28J60 Ethernet chip driver for MicroPython (RP2)

Related tags

Overview

micropy-ENC28J60

Rationale

Installation

Wiring

Example code

Packet transmission

Packet reception

You might also like...

MPY tool - manage files on devices running MicroPython

Controlling fireworks with micropython

Pylorawan is a Micropython wrapper for lorawan devices from RAK Wireless.

BMP180 sensor driver for Home Assistant used in Raspberry Pi

CircuitPython Driver for Adafruit 24LC32 I2C EEPROM Breakout 32Kbit / 4 KB

Python module for the qwiic serial control motor driver

Micropython-wifimanager-esp8266 - Simple Wifi Manager for ESP8266 using MicroPython

MicroPython driver for 74HC595 shift registers

SPI driven CircuitPython driver for PCA9745B constant current LED driver.

A Proof-of-Concept Layer 2 Denial of Service Attack that disrupts low level operations of Programmable Logic Controllers within industrial environments. Utilizing multithreaded processing, Automator-Terminator delivers a powerful wave of spoofed ethernet packets to a null MAC address.

A Chip-8 emulator written using Python's default libraries

Control the classic General Instrument SP0256-AL2 speech chip and AY-3-8910 sound generator with a Raspberry Pi and this Python library.

CircuitPython library for the CH559 USB to Serial chip

MicroPython - a lean and efficient Python implementation for microcontrollers and constrained systems

Simple GUI menu for micropython using a rotary encoder and basic display.

A Raspberry Pi Pico plant sensor hub coded in Micropython

uOTA - OTA updater for MicroPython

A linux-like remote terminal for Micropython

An open source operating system designed primarily for the Raspberry Pi Pico, written entirely in MicroPython

Comments

Using your lib with a pico

Question regarding the recieving and print of data

Releases(v1.0.1)

v1.0.1(Feb 12, 2022)

v1.0.0(Jan 7, 2022)

Owner

Playing diabolo with two robot arms in ROS + Gazebo

Robo Arm :: Rigging is a rigging addon for Blender that helps animating industrial robotic arms.

A DiY holiday project to demonstrate how you can send data from adafruitIO cloud to a balena edge device

Various programs in Atari BASIC for #FujiNet for Atari 8-bit

Estimation of whether or not the persons given information will have diabetes.

PyLog - Simple keylogger that uses pynput to listen to keyboard input.

Mini Pupper - Open-Source,ROS Robot Dog Kit

🐱 Petkit feeder components for HomeAssistant

A Python class for controlling the Pimoroni RGB Keypad for Raspberry Pi Pico

MicroPython driver for 74HC595 shift registers

2021 Real Robot Challenge Phase2 attemp

uOTA - OTA updater for MicroPython

Hardware: CTWingSKIT_BC28 Development Toolkit

A simple small scale electric car was build which can be driven by remote control and features a fully autonomous parking procedure.

A simple Picobot project implemented in Python

Rasberry Pie GPIO memory game. Press the corresponding key to the lit LED.

How to configure IOMMU device for nested Proxmox hypervisor (PVE) VM - PCIe Passthrough

Code reimplementation of some papers published in SAIL-Lab

The main aim of this project is to avoid the accidents in shredding ( Waste Recycling Industry )

A script that publishes power usage data of iDrac enabled servers to an MQTT broker for integration into automation and power monitoring systems