Sticklog2heatmap - Draw a heatmap of RC sticks from OpenTX logs or USB HID device

Related tags

Hardwaresticklog2heatmap
Overview

sticklog2heatmap

Draw a heatmap of RC sticks from OpenTX logs or USB HID device

Important notice

If using built binaries from here use sitcklog2heatmap.exe instead of python sticklog2heatmap.py. The same applies for hid2sticklog.exe

sticklog2heatmap.py

The tool that draws a png file with the heatmap

Usage:

python sticklog2heatmap.py

Opens all csv files in current directory

python sticklog2heatmap.py [filename1.csv]...[filenameN.csv]

Clear as is

python sticklog2heatmap.py [dirname]

Opens all csv files in dirname

Requirements:

  • numpy
  • opencv-python
  • matplotlib

Install with pip or any other preferred way

hid2sticklog.py

The tool to grab logs from the radio handset connected to the computer e.g. when flying in a simulator

Usage:

Simply run the script with python. If threre's more than one supported device in system the script will prompt.

Requirements:

  • hid from pip or anywhere else
  • hidapi library file in the same directory depending on your platform (e.g. hidapi.dll for windows)
You might also like...
A simple portable USB MIDI controller based on Raspberry-PI Pico and a 16-button keypad, written in Circuit Python

RPI-Pico-16-BTn-MIDI-Controller-using-CircuitPython A simple portable USB MIDI controller based on Raspberry-PI Pico, written in Circuit Python. Link

Rounak Dutta 3 Dec 4, 2022
Unofficial Playdate reverse-engineering notes/tools - covers file formats, server API and USB commands

Unofficial Playdate reverse-engineering notes/tools - covers file formats, server API and USB commands ⚠️ This documentation is unofficial and is not

James 106 Dec 31, 2022
A python file which I wrote to allow the Dorna Robots API to draw an Image on a 3D plane
A python file which I wrote to allow the Dorna Robots API to draw an Image on a 3D plane

Dorna-Robotics-Internship Code In the directory "Code" is a python file which I wrote to allow the Dorna Robots API to draw an Image on a 3D plane. I

Stephen Otto 2 Dec 6, 2021
Automatically draw a KiCad schematic for a circuit prototyped on a breadboard.
Automatically draw a KiCad schematic for a circuit prototyped on a breadboard.

Schematic-o-matic Schematic-o-matic automatically draws a KiCad schematic for a circuit prototyped on a breadboard. How It Works The first step in the

Nick Bild 22 Oct 11, 2022
Provide Unifi device info via api to Home Assistant that will give ap sensors
Provide Unifi device info via api to Home Assistant that will give ap sensors

Unifi AP Device info Provide Unifi device info via api to Home Assistant that will give ap sensors

null 12 Jan 7, 2023
A Python program that makes it easy to manage modules on a CircuitPython device!
A Python program that makes it easy to manage modules on a CircuitPython device!

CircuitPython-Bundle-Manager-v2 A Python program that makes it easy to manage modules on a CircuitPython device! The CircuitPython Bundle Manager v2 i

Ckyiu 1 Dec 18, 2021
How to configure IOMMU device for nested Proxmox hypervisor (PVE) VM - PCIe Passthrough
How to configure IOMMU device for nested Proxmox hypervisor (PVE) VM - PCIe Passthrough

Configuring PCIe Passthrough for Nested Virtualization on Proxmox Summary: If you are running bare-metal L0 (level 0) Proxmox (PVE) hypervisor with ne

Travis Johnson 6 Aug 30, 2022
A DiY holiday project to demonstrate how you can send data from adafruitIO cloud to a balena edge device
A DiY holiday project to demonstrate how you can send data from adafruitIO cloud to a balena edge device

holiday-star balena ❤️ adafruitIO Introduction A DiY holiday project to demonstrate how you can send data from adafruitIO cloud to a balena edge devic

Ayan Pahwa 3 Dec 20, 2021
Python library to interact with the GCE Electronics IPX800 device
Python library to interact with the GCE Electronics IPX800 device

A python library to control a GCE-Electronics IPX800 V4 device through its API.

Marc-Aurèle Brothier 2 Oct 20, 2021
Releases(0.1)

  • 0.1(Feb 2, 2022)

    Built win64 binaries with pyinstaller. hidapi.dll is still needed for hid2sticklog, grab it somewhere here. You don't even need to open the console (cmd or PowerShell):

    • Doubleclick hid2sticklog.exe to record a log, Press Ctrl+C to save and exit.
    • Doubleclick sticklog2heatmap.exe to process all csv files in current directory
    • Grab several files or a single directory upon sticklog2heatmap.exe to process selectively
    Source code(tar.gz)
    Source code(zip)
    hid2sticklog.exe(5.40 MB)
    sticklog2heatmap.exe(68.48 MB)
Owner
A humble game developer who's into RC flying things.
GitHub Repository
A script for performing OTA update over BLE on ESP32

A script for performing OTA update over BLE on ESP32

Felix Biego 18 Dec 15, 2022
Hook and simulate global keyboard events on Windows and Linux.

keyboard Take full control of your keyboard with this small Python library. Hook global events, register hotkeys, simulate key presses and much more.

BoppreH 3.2k Dec 30, 2022
Cascade Drone Swarm Physical Demonstration Project

Cascade Drone Swarm Physical Demonstration Project Table of Contents About The Project Built With Getting Started Prerequisites Installation About The

3 Aug 24, 2022
For use with an 8-bit parallel TFT touchscreen using micropython

ILI9341-parallel-TFT-driver-for-micropython For use with an 8-bit parallel TFT touchscreen using micropython. Many thanks to prenticedavid and his MCU

3 Aug 02, 2022
This repository contains all the code and files needed to simulate the notspot quadrupedal robot using Gazebo and ROS.

Notspot robot simulation - Python version This repository contains all the files and code needed to simulate the notspot quadrupedal robot using Gazeb

50 Sep 26, 2022
🐱🖨Cat printer is a portable thermal printer sold on AliExpress for around $20.

Cat printer is a portable thermal printer sold on AliExpress for around $20. This repository contains Python code for talking to the cat printer over

671 Jan 05, 2023
Lenovo Legion 5 Pro 2021 Linux RGB Keyboard Light Controller

Lenovo Legion 5 Pro 2021 Linux RGB Keyboard Light Controller This util allows to drive RGB keyboard light on Lenovo Legion 5 Pro 2021 Laptop Requireme

36 Dec 16, 2022
A simple small scale electric car was build which can be driven by remote control and features a fully autonomous parking procedure.

personal-autonomous-parking-car-raspberry A simple electric car model was build using Raspbery pi. The car has remote control and autonomous operation

Kostas Ziovas 2 Jan 26, 2022
LT-OCF: Learnable-Time ODE-based Collaborative Filtering, CIKM'21

LT-OCF: Learnable-Time ODE-based Collaborative Filtering Our proposed LT-OCF Our proposed dual co-evolving ODE Setup Python environment for LT-OCF Ins

Jeongwhan Choi 15 Dec 28, 2022
a weather application for the raspberry pi and the Pimorioni Inky pHAT.

raspi-weather a weather application for the raspberry pi and the Inky pHAT

Derek Caelin 59 Oct 24, 2022
hardware design of the 250mm drone

hardware design of the 250mm drone

ZJU FAST Lab 645 Dec 25, 2022
The goal of this project is for anyone with an old printer to be able to double-sided printing.

Welcome to PDF-double-side! Hi! I'm 15. I have a old printer so I can't print double-sided outs. The goal of this project is for anyone with an old pr

DejaVu 4 Dec 28, 2021
This is the remake of the program PYOBD. It works on Python3 and all new libraries. It was tested on Linux, Windows, and it should work on MAC too.

This is the remake of the program PYOBD. It works on Python3 and all new libraries. It was tested on Linux, Windows, and it should work on MAC too. You just need an ELM327 USB or bluetooth device and

127 Jan 06, 2023
A small Python app to converse between MQTT messages and 433MHz RF signals.

mqtt-rf-bridge A small Python app to converse between MQTT messages and 433MHz RF signals. This acts as a bridge between Paho MQTT and rpi-rf. Require

David Swarbrick 3 Jan 27, 2022
Hotplugger: Real USB Port Passthrough for VFIO/QEMU!

Hotplugger: Real USB Port Passthrough for VFIO/QEMU! Welcome to Hotplugger! This app, as the name might tell you, is a combination of some scripts (py

DARKGuy (Alemar) 66 Nov 24, 2022
LUNA: a USB multitool & nMigen library

LUNA is a full toolkit for working with USB using FPGA technology; and provides hardware, gateware, and software to enable USB applications.

Great Scott Gadgets 750 Dec 28, 2022
Point Density-Aware Voxels for LiDAR 3D Object Detection (CVPR 2022)

PDV PDV is LiDAR 3D object detection method. This repository is based off [OpenPCDet]. Point Density-Aware Voxels for LiDAR 3D Object Detection Jordan

Toronto Robotics and AI Laboratory 114 Dec 21, 2022
Uses the Duke Energy Gateway to import near real time energy usage into Home Assistant

Duke Energy Gateway This is a custom integration for Home Assistant. It pulls near-real-time energy usage from Duke Energy via the Duke Energy Gateway

Michael Meli 28 Dec 23, 2022
A Raspberry Pi Pico powered Macro board, like a Streamdeck but cheaper and simpler.

Env-MCRO A Raspberry Pi Pico powered Macro board, like a Streamdeck but cheaper and simpler. (btw this image is a bit outdated, some of the silkscreen

EnviousData 68 Oct 14, 2022
Yet another automation project because a smart light is more than just on or off.

Automate home Yet another home automation project because a smart light is more than just on or off. Overview When talking about home automation there

Maja Massarini 62 Oct 10, 2022