Simple introduction to ENSP

ensp Installation

1. The installation directory cannot have English
2. First install the next three software , And then restart , And then install it ensp,ensp Once installed , open ensp

3. Click on : menu -> Tools -> Register device
4. After successful registration , Drag several devices , Check whether it can start normally , Start up normal , shows OK!

vrp Simple instructions

vrp What is it? ?

vrp It is Huawei's own network operating system .

Instructions for beginners to get started

(1) User view :
(2) The system view :[Huawei]
(3) Interface view :
eg:

Instructions to enter the structure :
Such as :int g0/0/0 g It means something like GE 0/0/0 Such an interface

int e0/0/0 e It means something like Enternet 0/0/1 Such an interface

(4) Back to command :

①quit ( The abbreviation is :q )=> Return from the interface view to the system view .
②return ( abbreviation :ret ) => Back to the user view .

(5) The delete command :
undo+ command
(6) Restart command : reboot
(7) Change device name : stay The system view Next ,sysname+ name
(8) Save command :save
(9) Turn off the command of miscellaneous prompt information :undo ter mon

About vlan

vlan Meaning of being :
You want to configure Switch Of ip Address , Need to use vlan To encapsulate .

About routing and some protocols