1. Mx6ul core module serial -iot-6ulx core module brief introduction (I)

IoT-6ULX    NAND BOOT(TOP）

 

IoT-6ULX    (QSPI NOR BOOT TOP)

  Product characteristics ：

• use NXP company Cortex-A7 I.MX6UL/L processor , The maximum running speed is 900MHZ, low power consumption ;
• Support 128M-1G BYTES DDR3 SDRAM;
• Support SLC NAND(256M-1G BYTES) or QSPI NOR FLASH Can start ;
• It can support up to one 100 Gigabit Ethernet +AP6214 WIFI+BT 4.2;
• Support two-way expressway USB OTG, Interfaced 4G/WIFI modular ;
• Support the most 4 Serial port , dual CAN BUS;
• Support DS1338 High precision clock , With battery backup
• Support the highest resolution 1366*768 Display interface ;
• Stamp hole core module , High cost performance ,low Price, Good stability ;
• Stable operating system support , Pre installed LINUX 4.14.78/Yacto, Welcome to customize
• Ultra small volume , Size is :39X39X1.0MM

Brief introduction ：

Industrial wide temperature design , Work more stably ：

IoT-6ULX, Main orientation Internet Of Things application , The product integrates  ARM Cortex-A7 900Hz(MAX) NXP I.MX6UL/L  processor , Parallel onboard AP6214 WIFI modular +BT4.2, Stable operation Linux 4.14 and YACTO.IoT-6ULX Provides 3.3V I/O Interface , Industrial components with wide temperature range , Operate in industrial sites with poor conditions ！ 

Provide development kits , Can be quickly applied  

The development kit includes the motherboard 、 Various LCD parts , Provide development tools and API function 、 Reference code 、 Detailed instruction manual , Let customers get started quickly .

master control CPU Functional block diagram :

i.MX6UL/L Core module products :

I.MX6UL/L CPU List and function differences :

 

 

  explain :

1)IoT-6ULX The above compatible products can be selected according to customer requirements CPU. Welcome friends to buy .

2) We try our best to prepare all kinds of inventory , Because there are many kinds of products , Can't prepare them all . Mainly with I.MX6ULL Mainly ;

Product block diagram ：

i.MX6UL/L Core module size :

Product parameters ：

	FUNCTION	IoT-6ULX
main parameter	Main controller	NXP I.MX6UL/L,Cortex-A7,528MHZ/800MHZ (900MHZ Max)
	Memory	256MB DDR3(Up to 1GB )
	Flash memory	SLC NAND (Up to 1GB)  /QSPI NOR FLASH(Up to 64MB)
	graphic display	built-in 24 position  LCD controller
	The clock	built-in
	watchdog	Yes
	Power management	MP2112/RT9013
	Reset	Support software and hardware reset  ( Write directly to the register )
I/O	A serial port	A serial port 8 individual ,LVTTL level ( Dual network multiplexing 3 A serial port )
	Ethernet	1 MAC
	USB 2.0 OTG	2 individual , High speed
	SD/MMC card	2 individual ,MMC 4.5/SD 3.0/SDIO standard
	WIFI	AP6214,SD/MMC Interface extension
	Touch screen	CPU built-in , Support 4 Line ,
	The system bus	nothing
	IIC Interface	2
	SPI Interface	2
	GPIO	Multiple 3.3V LVTTL level
	IIS Audio	1
	CAMERA	1, Support CMOS,
	CAN Bus	2
	The resolution of the	Maximum 1366×768
	LCD Interface	18-bit TTL Interface
Power Supply	Power Supply	3.3 V (+-5%)
	Power Consumption	TBD
Size  & Environmental Science	Size	39MM*39MM
	working temperature	0 ~ 70° C ( Customizable -30-80°C)
	Working humidity	5 ~ 95 % , Cold condensation
other	RoHS	YES
	authentication	CE
	Software support	Linux 4.14/YACTO

  Support software ：

(linux 4.14)

Evaluation board ( Industrial control board ) A physical picture :

 

  Recommended applications ：

Company introduction ：

Yingpengfei company was founded in 2004 year , Is a professional embedded motherboard solution provider .

Address ： Yuetong complex building, Minle Road, Longhua, Shenzhen E building 504 room

mail ：[email protected]

Telephone ：[phone]

Fax ：[phone] 

website : www.embedall.IoT