Safety training management measures

Chapter one total be

Article 1 with a To strengthen the labor protection of the company's production work , Improving working conditions , Protect the safety and health of workers in the production process , Promote the development of the company , According to the law on labor protection 、 Regulations and other relevant provisions , The measures are formulated in combination with the actual situation of the company .

Second Safety training principles

（ One ） Adhere to people-oriented 、 The principle of training according to law .

（ Two ） Adhere to territorial management 、 The principle of being responsible to the enterprise .

（ 3、 ... and ） Insist on Teaching on demand 、 The principle of quality assurance .

（ Four ） Insist on the separation of examination and training 、 The principle of objectivity and impartiality .

（ 5、 ... and ） Stick to the point 、 The principle of full training .

Chapter two Organization and responsibilities

Article 3 the Work safety committee of the company ( Hereinafter referred to as the safety committee ) It is the leading organization of the company for safety production , Led by the company and the production department 、 General management department 、 The quality department and other relevant department leaders are mainly responsible for .

Article 4. The main responsibilities of the Safety Committee :

（ One ） Be fully responsible for the safety production management of the company ;

（ Two ） Study and formulate technical measures for safety production and labor protection plan ;

（ 3、 ... and ） Implement safety production inspection and supervision , Investigate and deal with accidents .

Article 5. The daily affairs of the safety committee shall be handled by the enterprise management section of the general management department .

Article 6. The production department of the company must establish a safety production leading group , Its main responsibilities ：

（ One ） Be responsible for carrying out safety production education for the employees of the unit , Formulate detailed rules and operating procedures for safety production .

（ Two ） Implement safety production supervision and inspection , Implement the safety instructions of the safety committee , Ensure production safety .

（ 3、 ... and ） The leader of the safety production team shall be the workshop director of each workshop , And provide part-time safety production management personnel as required .

Article 7. The general manager of the company is the first person responsible for the safety production of the unit , Deputy general manager in charge of production 、 Director of production department 、 Workshop directors （ The manager ） And the part-time safety production administrator are the main responsible person for the safety production of the company and the Department .

Article 8. Responsibilities of the company's main responsible person for safety production

（ One ） Assist the general manager of the company 、 The deputy general manager implements the labor protection law 、 The system , Comprehensively manage daily work safety .

（ Two ） Summarize and review safety production measures and plans , And urge relevant departments to implement the plan on schedule .

（ 3、 ... and ） To develop 、 Revise safety production management rules and regulations , And supervise and inspect the implementation of these rules and regulations .

（ Four ） Regularly organize and carry out safety production inspection , Prevent production safety accidents , Including but not limited to COVID-19 prevention and control accidents and food hygiene and safety issues .

（ 5、 ... and ） Summarize and popularize the advanced experience of safety production , Assist the company in the publicity, education and professional training of safety production .

（ 6、 ... and ） Participate in the investigation and handling of casualty accidents , Be responsible for the statistics of casualty accidents 、 Analysis and reporting , Assist relevant departments to put forward measures to prevent accidents , And urge them to realize on time .

（ 7、 ... and ） Upload and release the instructions of the superior and the situation of the grass-roots level , Do a good job of information feedback .

（ 8、 ... and ） The workshop director shall inspect the equipment before going to work every day 、 Circuit safety .

Article 9. Responsibilities of part-time safety production administrator ：

（ One ） Assist the leaders of the unit to implement labor protection laws and regulations and safety production management system ;

（ Two ） To handle the daily work safety affairs and work safety inspection and supervision of the unit .

Article 10. Safety responsibilities of the safety officer in the production workshop ：

（ One ） Check regularly 、 Supervise and urge the workshop 、 The team members shall comply with the safety production system and operating procedures .

（ Two ） Prepare the equipment 、 Safety inspection of tools, etc 、 Maintenance work .

（ 3、 ... and ） Report to the superior in time ( room )、 Safety production of the team .

（ Four ） Do a good job in registering and keeping the original materials .

Article 11 Employee safety responsibilities ：

（ One ） In production 、 Carefully study and implement the safety technical operation procedures during work ;

（ Two ） Abide by the rules and regulations , Take good care of production equipment and safety protection devices 、 Facilities and labor protection articles .

（ 3、 ... and ） Unsafe conditions are found , Report to the leader in time , Remove quickly .

The third chapter Personnel safety training

Twelfth article Safety training requirements

（ One ） Main person in charge of the enterprise 、 Safety production management personnel 、 Special operators and other employees must participate in safety training .

（ Two ） The training should enhance the safety awareness 、 Focus on mastering safety knowledge and on-site operation skills .

（ 3、 ... and ） Focus on strengthening the safety training for new employees in the workshop , Ensure new employees understand and master safety training knowledge , Strengthen the awareness of fire and electricity prevention .

Article 13 Safety training for on-the-job employees

（ One ） According to the requirements of the national unified syllabus , All on-the-job employees' safety training must be arranged according to the specified class hours , Ensure training time .

（ Two ） The on-the-job employees shall receive safety training for not less than 20 A class hour .

（ 3、 ... and ） Employees who have obtained corresponding safety operation qualification certificates , Must be reviewed every two years .

Chapter four Contents, forms and strengthening of safety training

Article 14 Contents of safety training

（ One ） Company profile 、 Risk factors in working environment and production operation 、 Occupational health injuries and casualties that may be caused by the type of work 、 Job safety responsibilities 、 Operating skills and mandatory standards , Legal liability for forcing risky operations .

（ Two ） Responsibility for stopping operation and evacuating the site in case of emergency 、 Obligations and rights .

（ 3、 ... and ） Emergency plan and self rescue and mutual rescue in case of disasters 、 The method of urgent education and the route of avoiding disaster .

（ Four ） Safety production rules and regulations and labor discipline .

（ 5、 ... and ） Use and maintenance of fire extinguishers and other safety equipment and facilities .

（ 6、 ... and ） Procedures for entering and leaving the production site 、 Ventilation safety system 、 Alarm system and safety indication signs .

（ 7、 ... and ） Typical accident case analysis, etc .

Article 15 Enrich training forms

（ One ） In combination with the actual safety production of the enterprise and the current situation that most employees have low cultural level , Make the most of TV 、 multimedia 、 Animation 、 A variety of intuitive methods such as cartoons are used for training , Adhere to the combination of safety training and cultural tutoring 、 The combination of targeted sex education and systematic explanation 、 Visual training and senior employees “ Pass on 、 help 、 belt ” Combination .

（ Two ） It can be announced by nailing 、 Wechat group and other popular forms release safety training content （ video ）.

Article 16 Strengthen the construction of enterprise safety culture in line with the actual situation of the enterprise , Closely combine safety training with safety publicity and education , Through carrying out safety knowledge Solitaire 、 Safety technology competition 、 Safety literature and art publicity and other activities , Make the training and publicity of safety knowledge humanized 、 The effect of actual effect .

Article 17. Strengthen training management , Carefully implement various training management systems , Strict training process control , Establish training files signed by the company and employees .

Article 18 Each department shall organize the on-the-job employees to learn the necessary knowledge and skills of the enterprise safety manual and post safety work procedures in a planned way in their spare time after work or in the working interval , Ensure that employees have a high degree of self-protection awareness and safety production quality .

The fifth chapter attach be

Article 19 The measures shall be implemented as of the date of promulgation .

Twentieth Preparation of the measures 、 The General Management Department reserves the right to modify and interpret .