Answers to some problems encountered in the process of Xperia XZ (f8332) brushing and root

There are many problems encountered in the process of brushing the machine , A lot of time , Write it down for reference to people who encounter the same problem ：

1. The correct directory has been selected ,Flashtool No recognition .ftf file

Please change it Flashtool Version to try

2.Flashtool Has been stuck in Syncing Device from Github

• Please change it Flashtool Version to try
• See if there is something similar at the end of the output information “Proxy Detected” The words... , Some words indicate that there are proxy settings in your system , Please ensure that the agent software works normally , Or delete the proxy settings in the system
• Github It was walled in your area , Try using agent software

3. The mobile phone has Flashmode Connect the computer with the green light ,Flashtool Been waiting

The following unused methods do not need to be used completely , You can try one by one , If you succeed, there is no other way

• Win System installation driver , Remember to press when the computer is turned on F8 Disable forced signing , Only in this way can the driver be installed correctly
• Linux The system needs to be set udev, Specifically, baidu
• The Internet says to change it Flashtool The version can succeed , however 0.9.21 After that, the driver installer is the same （v1.9 20160308）, So it shouldn't be the version
• Connect USB3.0 Sometimes I just can't recognize , Connect USB2.0 No problem at all
• When connecting the computer, press and hold the volume key , The blue light appeared and immediately released , It will turn green in a moment （ I'm not sure if it's just like this on my mobile phone ）, Wait for a 10s You can recognize the appearance of

4.Flashtool Medium output Flash script not found

• Someone on the Internet said go devices Copy the folder corresponding to your model in the folder , Put it in mydevices I'll be fine , Never tried.
• Someone on the Internet said that you should fill in correctly when packing Brand、Version Etc ……
• REPACK , When you pack it, you will be prompted “A FSC script is found : 39.fsc. Do you want to add it?”, choose yes, In this way, there is a script to brush the machine

5.Flashtool Cannot input when packing in model model

Don't type , Double click to select

6. Brush in Kernel_boot.img after , Memory capacity has shrunk

Finish the official ROM, Entry system , Complete the settings , Install two APP Then shut down and brush kernel

7. Get into TWRP Prompt for password

• Set up a 4 In figures PIN code , Enable boot password
• Set a password , Enable boot password
• If the password error is always displayed for the first time , Press cancel And then restart to enter recovery It's going to work
• Finish the official ROM、KERNEL、TWRP after , Turn it on ,“ Stay on the language selection page ”,USB Connecting to a computer , Put the bag that needs to be brushed （ such as Magisk） Put it into the mobile phone storage , Restart access TWRP
• If it doesn't work up there , Then please format data Partition , And use SD Swipe the card （ Cannot enter the system after formatting , Once you enter the system, you need a password ）.

8. stay TWRP Middle brush in superSU When "Failure aborting", perhaps Magisk “Stock Kernel” not supported

• Method 1 ： Someone made a patch , Although I've tried, I can't …….https://forum.xda-developers.com/apps/supersu/error-installing-supersu-failure-t3777834
• Method 2 ： Use sony In native systems kernel That is to say boot.img Do not brush into the above root package , Need to find a modified kernel Just brush it in . Not recommended AndroPlusKernel, Because the update has stopped ,8.0 The system brushes in 7.0 perhaps 6.0 Corresponding kernel Words , It may be stuck in the boot screen .8.0 You can use the following ,https://www.themefoxx.com/2017/11/twrp-root-xperia-xz-android-oreo.html

9. Brush in GAPPS Many applications flash back after the package

Install the latest android system webview, Then put the finished /data/app/ Cut the whole folder to system/app Next , Grant authority , restart