当前位置:网站首页>Gossip about redis source code 80
Gossip about redis source code 80
2022-07-03 23:24:00 【Tao song remains the same】
socke Related operations , We need to figure out the blockage socket And non blocking socket Use of oh :
#include "anet.h"
static void anetSetError(char *err, const char *fmt, ...)
{
va_list ap;
if (!err) return;
va_start(ap, fmt);
vsnprintf(err, ANET_ERR_LEN, fmt, ap);
va_end(ap);
}
int anetSetBlock(char *err, int fd, int non_block) {
int flags;
/* Set the socket blocking (if non_block is zero) or non-blocking.
* Note that fcntl(2) for F_GETFL and F_SETFL can't be
* interrupted by a signal. */
if ((flags = fcntl(fd, F_GETFL)) == -1) {
anetSetError(err, "fcntl(F_GETFL): %s", strerror(errno));
return ANET_ERR;
}
/* Check if this flag has been set or unset, if so,
* then there is no need to call fcntl to set/unset it again. */
if (!!(flags & O_NONBLOCK) == !!non_block)
return ANET_OK;
if (non_block)
flags |= O_NONBLOCK;
else
flags &= ~O_NONBLOCK;
if (fcntl(fd, F_SETFL, flags) == -1) {
anetSetError(err, "fcntl(F_SETFL,O_NONBLOCK): %s", strerror(errno));
return ANET_ERR;
}
return ANET_OK;
}
int anetNonBlock(char *err, int fd) {
return anetSetBlock(err,fd,1);
}
int anetBlock(char *err, int fd) {
return anetSetBlock(err,fd,0);
}
/* Enable the FD_CLOEXEC on the given fd to avoid fd leaks.
* This function should be invoked for fd's on specific places
* where fork + execve system calls are called. */
int anetCloexec(int fd) {
int r;
int flags;
do {
r = fcntl(fd, F_GETFD);
} while (r == -1 && errno == EINTR);
if (r == -1 || (r & FD_CLOEXEC))
return r;
flags = r | FD_CLOEXEC;
do {
r = fcntl(fd, F_SETFD, flags);
} while (r == -1 && errno == EINTR);
return r;
}
/* Set TCP keep alive option to detect dead peers. The interval option
* is only used for Linux as we are using Linux-specific APIs to set
* the probe send time, interval, and count. */
int anetKeepAlive(char *err, int fd, int interval)
{
int val = 1;
if (setsockopt(fd, SOL_SOCKET, SO_KEEPALIVE, &val, sizeof(val)) == -1)
{
anetSetError(err, "setsockopt SO_KEEPALIVE: %s", strerror(errno));
return ANET_ERR;
}
#ifdef __linux__
/* Default settings are more or less garbage, with the keepalive time
* set to 7200 by default on Linux. Modify settings to make the feature
* actually useful. */
/* Send first probe after interval. */
val = interval;
if (setsockopt(fd, IPPROTO_TCP, TCP_KEEPIDLE, &val, sizeof(val)) < 0) {
anetSetError(err, "setsockopt TCP_KEEPIDLE: %s\n", strerror(errno));
return ANET_ERR;
}
/* Send next probes after the specified interval. Note that we set the
* delay as interval / 3, as we send three probes before detecting
* an error (see the next setsockopt call). */
val = interval/3;
if (val == 0) val = 1;
if (setsockopt(fd, IPPROTO_TCP, TCP_KEEPINTVL, &val, sizeof(val)) < 0) {
anetSetError(err, "setsockopt TCP_KEEPINTVL: %s\n", strerror(errno));
return ANET_ERR;
}
/* Consider the socket in error state after three we send three ACK
* probes without getting a reply. */
val = 3;
if (setsockopt(fd, IPPROTO_TCP, TCP_KEEPCNT, &val, sizeof(val)) < 0) {
anetSetError(err, "setsockopt TCP_KEEPCNT: %s\n", strerror(errno));
return ANET_ERR;
}
#else
((void) interval); /* Avoid unused var warning for non Linux systems. */
#endif
return ANET_OK;
}
static int anetSetTcpNoDelay(char *err, int fd, int val)
{
if (setsockopt(fd, IPPROTO_TCP, TCP_NODELAY, &val, sizeof(val)) == -1)
{
anetSetError(err, "setsockopt TCP_NODELAY: %s", strerror(errno));
return ANET_ERR;
}
return ANET_OK;
}
int anetEnableTcpNoDelay(char *err, int fd)
{
return anetSetTcpNoDelay(err, fd, 1);
}
int anetDisableTcpNoDelay(char *err, int fd)
{
return anetSetTcpNoDelay(err, fd, 0);
}
/* Set the socket send timeout (SO_SNDTIMEO socket option) to the specified
* number of milliseconds, or disable it if the 'ms' argument is zero. */
int anetSendTimeout(char *err, int fd, long long ms) {
struct timeval tv;
tv.tv_sec = ms/1000;
tv.tv_usec = (ms%1000)*1000;
if (setsockopt(fd, SOL_SOCKET, SO_SNDTIMEO, &tv, sizeof(tv)) == -1) {
anetSetError(err, "setsockopt SO_SNDTIMEO: %s", strerror(errno));
return ANET_ERR;
}
return ANET_OK;
}
/* Set the socket receive timeout (SO_RCVTIMEO socket option) to the specified
* number of milliseconds, or disable it if the 'ms' argument is zero. */
int anetRecvTimeout(char *err, int fd, long long ms) {
struct timeval tv;
tv.tv_sec = ms/1000;
tv.tv_usec = (ms%1000)*1000;
if (setsockopt(fd, SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof(tv)) == -1) {
anetSetError(err, "setsockopt SO_RCVTIMEO: %s", strerror(errno));
return ANET_ERR;
}
return ANET_OK;
}
/* Resolve the hostname "host" and set the string representation of the
* IP address into the buffer pointed by "ipbuf".
*
* If flags is set to ANET_IP_ONLY the function only resolves hostnames
* that are actually already IPv4 or IPv6 addresses. This turns the function
* into a validating / normalizing function. */
int anetResolve(char *err, char *host, char *ipbuf, size_t ipbuf_len,
int flags)
{
struct addrinfo hints, *info;
int rv;
memset(&hints,0,sizeof(hints));
if (flags & ANET_IP_ONLY) hints.ai_flags = AI_NUMERICHOST;
hints.ai_family = AF_UNSPEC;
hints.ai_socktype = SOCK_STREAM; /* specify socktype to avoid dups */
if ((rv = getaddrinfo(host, NULL, &hints, &info)) != 0) {
anetSetError(err, "%s", gai_strerror(rv));
return ANET_ERR;
}
if (info->ai_family == AF_INET) {
struct sockaddr_in *sa = (struct sockaddr_in *)info->ai_addr;
inet_ntop(AF_INET, &(sa->sin_addr), ipbuf, ipbuf_len);
} else {
struct sockaddr_in6 *sa = (struct sockaddr_in6 *)info->ai_addr;
inet_ntop(AF_INET6, &(sa->sin6_addr), ipbuf, ipbuf_len);
}
freeaddrinfo(info);
return ANET_OK;
}
static int anetSetReuseAddr(char *err, int fd) {
int yes = 1;
/* Make sure connection-intensive things like the redis benchmark
* will be able to close/open sockets a zillion of times */
if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &yes, sizeof(yes)) == -1) {
anetSetError(err, "setsockopt SO_REUSEADDR: %s", strerror(errno));
return ANET_ERR;
}
return ANET_OK;
}
static int anetCreateSocket(char *err, int domain) {
int s;
if ((s = socket(domain, SOCK_STREAM, 0)) == -1) {
anetSetError(err, "creating socket: %s", strerror(errno));
return ANET_ERR;
}
/* Make sure connection-intensive things like the redis benchmark
* will be able to close/open sockets a zillion of times */
if (anetSetReuseAddr(err,s) == ANET_ERR) {
close(s);
return ANET_ERR;
}
return s;
}
#define ANET_CONNECT_NONE 0
#define ANET_CONNECT_NONBLOCK 1
#define ANET_CONNECT_BE_BINDING 2 /* Best effort binding. */
static int anetTcpGenericConnect(char *err, const char *addr, int port,
const char *source_addr, int flags)
{
int s = ANET_ERR, rv;
char portstr[6]; /* strlen("65535") + 1; */
struct addrinfo hints, *servinfo, *bservinfo, *p, *b;
snprintf(portstr,sizeof(portstr),"%d",port);
memset(&hints,0,sizeof(hints));
hints.ai_family = AF_UNSPEC;
hints.ai_socktype = SOCK_STREAM;
if ((rv = getaddrinfo(addr,portstr,&hints,&servinfo)) != 0) {
anetSetError(err, "%s", gai_strerror(rv));
return ANET_ERR;
}
for (p = servinfo; p != NULL; p = p->ai_next) {
/* Try to create the socket and to connect it.
* If we fail in the socket() call, or on connect(), we retry with
* the next entry in servinfo. */
if ((s = socket(p->ai_family,p->ai_socktype,p->ai_protocol)) == -1)
continue;
if (anetSetReuseAddr(err,s) == ANET_ERR) goto error;
if (flags & ANET_CONNECT_NONBLOCK && anetNonBlock(err,s) != ANET_OK)
goto error;
if (source_addr) {
int bound = 0;
/* Using getaddrinfo saves us from self-determining IPv4 vs IPv6 */
if ((rv = getaddrinfo(source_addr, NULL, &hints, &bservinfo)) != 0)
{
anetSetError(err, "%s", gai_strerror(rv));
goto error;
}
for (b = bservinfo; b != NULL; b = b->ai_next) {
if (bind(s,b->ai_addr,b->ai_addrlen) != -1) {
bound = 1;
break;
}
}
freeaddrinfo(bservinfo);
if (!bound) {
anetSetError(err, "bind: %s", strerror(errno));
goto error;
}
}
if (connect(s,p->ai_addr,p->ai_addrlen) == -1) {
/* If the socket is non-blocking, it is ok for connect() to
* return an EINPROGRESS error here. */
if (errno == EINPROGRESS && flags & ANET_CONNECT_NONBLOCK)
goto end;
close(s);
s = ANET_ERR;
continue;
}
/* If we ended an iteration of the for loop without errors, we
* have a connected socket. Let's return to the caller. */
goto end;
}
if (p == NULL)
anetSetError(err, "creating socket: %s", strerror(errno));
error:
if (s != ANET_ERR) {
close(s);
s = ANET_ERR;
}
end:
freeaddrinfo(servinfo);
/* Handle best effort binding: if a binding address was used, but it is
* not possible to create a socket, try again without a binding address. */
if (s == ANET_ERR && source_addr && (flags & ANET_CONNECT_BE_BINDING)) {
return anetTcpGenericConnect(err,addr,port,NULL,flags);
} else {
return s;
}
}
int anetTcpNonBlockConnect(char *err, const char *addr, int port)
{
return anetTcpGenericConnect(err,addr,port,NULL,ANET_CONNECT_NONBLOCK);
}
int anetTcpNonBlockBestEffortBindConnect(char *err, const char *addr, int port,
const char *source_addr)
{
return anetTcpGenericConnect(err,addr,port,source_addr,
ANET_CONNECT_NONBLOCK|ANET_CONNECT_BE_BINDING);
}
int anetUnixGenericConnect(char *err, const char *path, int flags)
{
int s;
struct sockaddr_un sa;
if ((s = anetCreateSocket(err,AF_LOCAL)) == ANET_ERR)
return ANET_ERR;
sa.sun_family = AF_LOCAL;
strncpy(sa.sun_path,path,sizeof(sa.sun_path)-1);
if (flags & ANET_CONNECT_NONBLOCK) {
if (anetNonBlock(err,s) != ANET_OK) {
close(s);
return ANET_ERR;
}
}
if (connect(s,(struct sockaddr*)&sa,sizeof(sa)) == -1) {
if (errno == EINPROGRESS &&
flags & ANET_CONNECT_NONBLOCK)
return s;
anetSetError(err, "connect: %s", strerror(errno));
close(s);
return ANET_ERR;
}
return s;
}
static int anetListen(char *err, int s, struct sockaddr *sa, socklen_t len, int backlog) {
if (bind(s,sa,len) == -1) {
anetSetError(err, "bind: %s", strerror(errno));
close(s);
return ANET_ERR;
}
if (listen(s, backlog) == -1) {
anetSetError(err, "listen: %s", strerror(errno));
close(s);
return ANET_ERR;
}
return ANET_OK;
}
static int anetV6Only(char *err, int s) {
int yes = 1;
if (setsockopt(s,IPPROTO_IPV6,IPV6_V6ONLY,&yes,sizeof(yes)) == -1) {
anetSetError(err, "setsockopt: %s", strerror(errno));
return ANET_ERR;
}
return ANET_OK;
}
static int _anetTcpServer(char *err, int port, char *bindaddr, int af, int backlog)
{
int s = -1, rv;
char _port[6]; /* strlen("65535") */
struct addrinfo hints, *servinfo, *p;
snprintf(_port,6,"%d",port);
memset(&hints,0,sizeof(hints));
hints.ai_family = af;
hints.ai_socktype = SOCK_STREAM;
hints.ai_flags = AI_PASSIVE; /* No effect if bindaddr != NULL */
if (bindaddr && !strcmp("*", bindaddr))
bindaddr = NULL;
if (af == AF_INET6 && bindaddr && !strcmp("::*", bindaddr))
bindaddr = NULL;
if ((rv = getaddrinfo(bindaddr,_port,&hints,&servinfo)) != 0) {
anetSetError(err, "%s", gai_strerror(rv));
return ANET_ERR;
}
for (p = servinfo; p != NULL; p = p->ai_next) {
if ((s = socket(p->ai_family,p->ai_socktype,p->ai_protocol)) == -1)
continue;
if (af == AF_INET6 && anetV6Only(err,s) == ANET_ERR) goto error;
if (anetSetReuseAddr(err,s) == ANET_ERR) goto error;
if (anetListen(err,s,p->ai_addr,p->ai_addrlen,backlog) == ANET_ERR) s = ANET_ERR;
goto end;
}
if (p == NULL) {
anetSetError(err, "unable to bind socket, errno: %d", errno);
goto error;
}
error:
if (s != -1) close(s);
s = ANET_ERR;
end:
freeaddrinfo(servinfo);
return s;
}
int anetTcpServer(char *err, int port, char *bindaddr, int backlog)
{
return _anetTcpServer(err, port, bindaddr, AF_INET, backlog);
}
int anetTcp6Server(char *err, int port, char *bindaddr, int backlog)
{
return _anetTcpServer(err, port, bindaddr, AF_INET6, backlog);
}
int anetUnixServer(char *err, char *path, mode_t perm, int backlog)
{
int s;
struct sockaddr_un sa;
if ((s = anetCreateSocket(err,AF_LOCAL)) == ANET_ERR)
return ANET_ERR;
memset(&sa,0,sizeof(sa));
sa.sun_family = AF_LOCAL;
strncpy(sa.sun_path,path,sizeof(sa.sun_path)-1);
if (anetListen(err,s,(struct sockaddr*)&sa,sizeof(sa),backlog) == ANET_ERR)
return ANET_ERR;
if (perm)
chmod(sa.sun_path, perm);
return s;
}
static int anetGenericAccept(char *err, int s, struct sockaddr *sa, socklen_t *len) {
int fd;
while(1) {
fd = accept(s,sa,len);
if (fd == -1) {
if (errno == EINTR)
continue;
else {
anetSetError(err, "accept: %s", strerror(errno));
return ANET_ERR;
}
}
break;
}
return fd;
}
int anetTcpAccept(char *err, int s, char *ip, size_t ip_len, int *port) {
int fd;
struct sockaddr_storage sa;
socklen_t salen = sizeof(sa);
if ((fd = anetGenericAccept(err,s,(struct sockaddr*)&sa,&salen)) == -1)
return ANET_ERR;
if (sa.ss_family == AF_INET) {
struct sockaddr_in *s = (struct sockaddr_in *)&sa;
if (ip) inet_ntop(AF_INET,(void*)&(s->sin_addr),ip,ip_len);
if (port) *port = ntohs(s->sin_port);
} else {
struct sockaddr_in6 *s = (struct sockaddr_in6 *)&sa;
if (ip) inet_ntop(AF_INET6,(void*)&(s->sin6_addr),ip,ip_len);
if (port) *port = ntohs(s->sin6_port);
}
return fd;
}
int anetUnixAccept(char *err, int s) {
int fd;
struct sockaddr_un sa;
socklen_t salen = sizeof(sa);
if ((fd = anetGenericAccept(err,s,(struct sockaddr*)&sa,&salen)) == -1)
return ANET_ERR;
return fd;
}
int anetFdToString(int fd, char *ip, size_t ip_len, int *port, int fd_to_str_type) {
struct sockaddr_storage sa;
socklen_t salen = sizeof(sa);
if (fd_to_str_type == FD_TO_PEER_NAME) {
if (getpeername(fd, (struct sockaddr *)&sa, &salen) == -1) goto error;
} else {
if (getsockname(fd, (struct sockaddr *)&sa, &salen) == -1) goto error;
}
if (ip_len == 0) goto error;
if (sa.ss_family == AF_INET) {
struct sockaddr_in *s = (struct sockaddr_in *)&sa;
if (ip) inet_ntop(AF_INET,(void*)&(s->sin_addr),ip,ip_len);
if (port) *port = ntohs(s->sin_port);
} else if (sa.ss_family == AF_INET6) {
struct sockaddr_in6 *s = (struct sockaddr_in6 *)&sa;
if (ip) inet_ntop(AF_INET6,(void*)&(s->sin6_addr),ip,ip_len);
if (port) *port = ntohs(s->sin6_port);
} else if (sa.ss_family == AF_UNIX) {
if (ip) snprintf(ip, ip_len, "/unixsocket");
if (port) *port = 0;
} else {
goto error;
}
return 0;
error:
if (ip) {
if (ip_len >= 2) {
ip[0] = '?';
ip[1] = '\0';
} else if (ip_len == 1) {
ip[0] = '\0';
}
}
if (port) *port = 0;
return -1;
}
/* Format an IP,port pair into something easy to parse. If IP is IPv6
* (matches for ":"), the ip is surrounded by []. IP and port are just
* separated by colons. This the standard to display addresses within Redis. */
int anetFormatAddr(char *buf, size_t buf_len, char *ip, int port) {
return snprintf(buf,buf_len, strchr(ip,':') ?
"[%s]:%d" : "%s:%d", ip, port);
}
/* Like anetFormatAddr() but extract ip and port from the socket's peer/sockname. */
int anetFormatFdAddr(int fd, char *buf, size_t buf_len, int fd_to_str_type) {
char ip[INET6_ADDRSTRLEN];
int port;
anetFdToString(fd,ip,sizeof(ip),&port,fd_to_str_type);
return anetFormatAddr(buf, buf_len, ip, port);
}
边栏推荐
- Bufferpool caching mechanism for executing SQL in MySQL
- [note] glide process and source code analysis
- Day30-t540-2022-02-14-don't answer by yourself
- [untitled]
- "Learning notes" recursive & recursive
- How to prevent malicious crawling of information by one-to-one live broadcast source server
- Pandaoxi's video
- To rotate 90 degrees clockwise and modify the video format
- 540. Single element in ordered array
- Enter MySQL in docker container by command under Linux
猜你喜欢
[Happy Valentine's day] "I still like you very much, like sin ² a+cos ² A consistent "(white code in the attached table)
Es6~es12 knowledge sorting and summary
Format cluster and start cluster
Hcip day 15 notes
2022.02.14
Weekly leetcode - nc9/nc56/nc89/nc126/nc69/nc120
Take you to master the formatter of visual studio code
Interesting 10 CMD commands
Idea integrates Microsoft TFs plug-in
[MySQL] classification of multi table queries
随机推荐
A treasure open source software, cross platform terminal artifact tabby
IO flow principle and classification
C # basic knowledge (2)
Pointer concept & character pointer & pointer array yyds dry inventory
Summary of fluent systemchrome
Bufferpool caching mechanism for executing SQL in MySQL
Day30-t540-2022-02-14-don't answer by yourself
Amway by head has this project management tool to improve productivity in a straight line
leetcode-43. String multiplication
ADB command to get XML
Fluent learning (5) GridView
Op amp related - link
[Android reverse] use the DB browser to view and modify the SQLite database (copy the database file from the Android application data directory | use the DB browser tool to view the data block file)
D23:multiple of 3 or 5 (multiple of 3 or 5, translation + solution)
Sword finger offer day 4 (Sword finger offer 03. duplicate numbers in the array, sword finger offer 53 - I. find the number I in the sorted array, and the missing numbers in sword finger offer 53 - ii
How to prevent malicious crawling of information by one-to-one live broadcast source server
File copy method
Recursion and recursion
Arc135 partial solution
Exclusive download! Alibaba cloud native brings 10 + technical experts to bring "new possibilities of cloud native and cloud future"