What's wrong with SD card data damage? How to recover SD card data damage

With the development of economy , More and more people are buying cameras , Whether professional photographers or amateurs , They all want to pat Good picture . Familiar with electronic equipment Of Little buddy knows , The camera Of The storage function is basically controlled by the camera Of Storage function composition Of SD card Come on bearing ！ But in the use of SD Card storage file when , Once the file because Own operation error By What about accidental deletion ？ let me put it another way ,SD Card data has been deleted How to restore Photos and video files inside ？ please Don't worry about , Today, Xiaobian will share here Some practical Of recovery Method , Let's see .

sd What happened to the card data corruption ：

commonly Come on , Want to recover SD card Of data , Find the reason for the loss One of the key methods ！ The following is a compilation and Share it SD card Several data loss Main cause ：

1. Hot key plugging

SD The card was pulled out while reading and writing , At this time, data reading and writing have not been completed , Pulling it out directly will cause file damage or loss .

2. poor contact

Long time use or incorrect plugging SD card , It will cause wear or oxidation of metal connecting pieces , As a result, the poor contact data cannot be read .

3. System exception

If something goes wrong with the file system , Kernel to protect data , Will be SD The card is in read-only state , Files written after that will be lost .

Combined with the above reasons , As long as it is not physically damaged , It can be retrieved through data recovery software SD Card data . Therefore, the following Xiaobian here with Super rabbit Data recovery software For example , Here's how to do it ：

1. Open super rabbit data recovery , Select... In scene mode U disc / Memory card recovery .

2. Click to select the removable hard disk partition to insert , Then click the start scan button .

3. The system starts to recognize and scan files , No need for manual operation , Just wait .

4. After scanning , Check the file to be recovered , Then click the restore now button in the lower right corner .

5. The data recovered here must be saved to another disk , Avoid the data before and after being damaged by secondary coverage .

6. The system begins to recover and export data , No manual operation is required in the whole process .

7. Data recovery successful , Click ok .

Above is sd How to recover the damaged card data Methods , I hope it can help you . It should be noted that , No matter which storage device is used to store files , Don't panic when you encounter data loss , Do not continue to write to the device .