DHCP server setup

1 We are server2016 Open the server manager from the start menu of , Click Add roles and features — Role based or feature based installation — Choose your server type — The server role will DHCP Hook in — Confirm that the installation is closed

2 Click start key , find windows Management tools , find DHCP And open . stay IPV4 Right click to create a new scope — Enter the scope name — Configure the address range — Configure excluded address ranges — Set the lease term — Configure a gateway — To configure DNS Address — Next, activate this application domain

3 At this point we are win10 Right click at the beginning of the system and click Run , Input cmd, Input ipconfig Now we can see IP The address is from DHCP An address configured in .

4 If we need to keep a specific IP Address if , We can do it in DHCP Create a new... On hold , Here we enter the reserved name , Reserved IP Address ,MAC Address （ This is where we are server System cmd Input in arp -a Find this address, right-click to copy and paste it here . This address is and win10 The address of is the same ）

5 At this point we are win10 System cmd Input in ipconfig /release Release address , Input ipconfig /renew Refresh , At this point, we can see the one we keep IP The address can be used .

6 We can also disable it through the filter IP Address , Right click on the filter to create a new filter , The MAC Copy and paste the address here , Add and enable .

7 This is us. win10 Asking for IP The address was found to be unreachable , Input ipconfig You can find the IP An address is an address automatically given locally . If you want to re enable it, you can disable it in the rejection , Then you can release the address and refresh it .