当前位置：网站首页>Main applications of TDK lambda power supply

Main applications of TDK lambda power supply

2022-07-04 04:26:00 【Agitek99】

tdk-lambda The rated voltage of the power supply is from 0~10V to 0~600V , The output current is 0~51A to 0~4500A, And can be at constant pressure 、 Work in constant current and constant power mode .

all GSPS Series of high-power power supply systems share a common 20U high 19 Inch rack , With removable casters . According to the different power of products , The front panel is equipped with 2~4 AC input circuit breaker , The output is connected through the solid copper bar at the rear of the cabinet .

Two high-power power supply systems with the same output voltage can be used as high-level main / Parallel from mode , Maximum... Available 120kW Power . The system is internally controlled by 2~4 platform GSP15kW In parallel , Thanks to its internal patented parallel circuit , Dynamic load response of the system 、 The ripple and noise characteristics can be comparable to that of a single small power supply .

With small power GENESYS+ Like a series of products ,GSPS Series high-power system can be controlled through the front panel , You can also use the standard LAN (LXI 1.5)、USB 2.0 and RS232/485 Communication interface for remote control , Or use standard isolated analog control and monitoring interfaces （0~5V or 0~10V） Programming . Optional interfaces include GPIB(IEEE488.2) And face EtherCat、Modbus And other interface options AnybusCompactCom Interface platform .

Software drivers are provided in the software package 、 Waveform generator and virtual front panel GUI. All power supplies are equipped with safety functions as standard , Provide security / Automatic restart 、 Finally set the storage and built-in protection functions . Voltage and current swing rate control 、 Internal resistance simulation and display brightness control are also standard functions .