[HCIA continuous update] overview of WLAN workflow

WLAN Workflow Overview

WLAN Workflow Overview

[ Failed to transfer the external chain picture , The origin station may have anti-theft chain mechanism , It is suggested to save the pictures and upload them directly (img-iAty6YvQ-1656061092646)(https://s1.ax1x.com/2022/06/23/jPMFeK.png)]

AP go online

WLAN Business configuration distribution

STA Access

WLAN Data forwarding method

WLAN Basic configuration commands for

To configure AP go online

1、 To configure AC As DHCP The server , To configure Option 43 Field

option code [sub-option sub-code] {ascii ascii-string | hex hex-string | hex hex-string | cipher cipher-string |ip-address ip-address}

2、 Create domain management template , And configure the country code

wlan

Get into VLAN View

regulatory-domain-profile name profile-name

Create and manage templates , And enter the template view , If the template already exists, you can directly enter the template view

country-code countrycode

Configure the country code identification of the equipment

ap-group name group-name

establish AP Group , And enter AP Group view , if AP If the group already exists, enter directly AP Group view

regulatory-domain-profile profile-name

Reference the specified domain management template to AP or AP Group

3、 Configure source interface or source address

To configure AC And AP establish CAPWAP Tunnel interface

capwap source interface { lookback loopback-number | vlanif vlan-id}

To configure AC Source ip Address

capwap source ip-address ip-address

4、 add to AP equipment - Offline import AP

To configure AP The authentication mode is MAC Address the authentication , or SN authentication , Default is MAC Address the authentication

ap auth-mode { mac-auth | sn-auth}

Offline add AP Equipment or access AP View , And configure a single AP The name of

ap-id ap-id [ [ type-id type-id | ap-type ap-type] {ap-mac ap-mac | ap-sn ap-sn |ap- mac ap-mac|ap-sn ap-sn } ]
ap-name ap-name

To configure AP The group you joined

ap-id ()
ap-group ap-group

5、 see AP Online results of

see AP Information

display ap {all|ap-group ap-group}

Configure RF

1、 Enter the RF view

ap-id ()
radio radio-id

2、 Configure the working bandwidth and channel under the specified RF

channel { a0mhz | 40mhz-minus | 40mhz-plus | 80mhz | 160mhz }chaannel
y

channel 80+80mhz channell channel2
y

3、 Configure the gain of the antenna

antenna-again antenna-gain

4、 Configure RF transmission power

eirp eirp

5、 Configure the distance parameter of RF coverage

coverage diatance diatance

6、 Configure the frequency band for RF operation

frequency {2.4g | 5g}

7、 Create RF template

radio-2g-profile name profile-name

8、 Reference RF template

ap-groud name group-name
radio-2g-profile profile-name radio {radio-id | all}

To configure VAP