Samba learning

VMware Network Adapter VMnet0： Host and virtual machine IP The address is in the same network segment For example The host IP Address 192.168.2.3 Then the operating system on the virtual machine IP The address is 192.168.2.4 （ The above figure does not show , Because it needs to be configured manually ）

VMware Network Adapter VMnet1： This is a Host Used with Host-Only Virtual network for communication -----（ Host only ）
network card .
VMware Network Adapter VMnet8 ： This is a Host Used with NAT Virtual network card for communication .----=-（Nat） Host and virtual machine IP The address is not in the same segment ,IP The address is virtual , Through the virtual network card to achieve broadcast

2、 Another problem is Bridging mode Only host mode and Nat The difference between patterns

( 1 ) NAT The Internet . This is a VMware One of the most commonly used networking modes in , This connection uses VMnet8 Virtual switch . In the same place NAT The system in network mode passes through VMnet8 The switch communicates .NAT In the network mode IP Address 、 Subnet mask 、 Gateway and DNS Servers are all through DHCP The distribution of . The system in this mode uses virtual when communicating with the outside world NAT The server .
( 2 ） Bridged Networking . This pattern is easy to understand , A system that chooses to use a bridging network is like a separate host in a local area network , It's as like as two peas , And it's also connected to this real network . So if you want this system to be networked , This system needs to be set up in the same way as the external real host .
( 3 ） Host only mode . This pattern and NAT The pattern is similar , The hosts in this networking mode are interconnected , But the default is not connected to the external network , This is a network experiment （ Especially worms ） You don't have to worry about spreading to the outside .

VMnet1, Host only mode ,Linux Only with Windows Connect ,Linux Have no access to the Internet
VMnet8,NAT Pattern ,Linux You can talk to Windows Connect ,Linux Internet access .
System installation and basic use

Shared resources ：
File server ：NFS(Linux Between ),SAMBA( The server Linux, The client WINDOWS)
FTP
WWW

One 、 Network erection （ Network mode ）
Two 、 Service installation （rpm -qa |grep nfs/smb）----->yum install nfs -y（ The fifth chapter ）
Four 、 Resource establishment （ file ）
5、 ... and 、 Service configuration + Service to restart
6、 ... and 、 test （showmount -e 192.168.1.10）
The client mount 192.168.1.10: common /mnt/nfs

1、 All users can access
2、 Can read but write

zs lisi
1、 Directories accessible to everyone （777）common
2、 Different users log in , Have their own private homes homes
3、 Project team directory ：zs,lisi,（ Write , Delete ）770

analysis ：（1） user （2） Group
（1） Catalog （2） jurisdiction

samba：
who ：public（ Whether to let everyone access ）public=yes == guest ok=yes ---->valid users=zs,@projecta

What for? ：read only=yes (no) read only=no ===>writable=yes
writable=yes ----> write list=zs,@projecta
The position of ：path=