Fluke fluke aircheck WiFi tester cannot configure file--- Ultimate solution experience

On 2022 year 4 month 18 Japan , A friend called me ： Why my own aircheck Unable to customize the configuration file on the machine ？ Not to mention automated testing and ssid Connect .

This phenomenon is in daily use , Many people can meet , stay aircheck Access points and configuration test files cannot be set on . Even set the profile on the computer , It cannot be imported and used normally , Use personal configuration files correctly . Only test aircheck The location accepts wifi Signal point , Of course, it can also be judged wifi Signal strength , But I can't access SSID in , Carry out the next test .

here , Careful friends will find that there is no automatic test and client in the main interface at this time , this 2 Missing icons , That is the root cause . If this is the case with your device , Next we have to look carefully . It can be solved through version update .

aircheck And the computer are connected by data cable , And open Aircheck Manager Software , Click... In the menu bar aircheck, Update software .

  Load the new version of firmware , To be transmitted , It will take a few minutes . Do not unplug the data cable or close the software .

  After transmission , Unplug the cable , colleagues aircheck Screen white screen , And send out a pleasant prompt sound , after 3 After a different tone , The equipment is updated .

Since then , All updated . At the same time, you will be surprised to find more screens 2 An icon , Automated testing and client .

 

  Now it's done ！！！