RF analyze demo build step by step

newly build RF_AnalyzerDemo Step by Step

1. start-up vivado New project

2022 year 7 month 3 Japan Vivado Version 2022.1

2. Enter project name , Project location, etc

This step is actually not important. You can enter a name casually , The default is OK, because in the end, you won't actually use this for Engineering

3. Choose hardware , I'm based here XILINX Of ZCU111 Development board , I choose the development board directly

4. from IP Select... From the manager RF Data Converter Of ip

5. Because I am evaluating the nature of the application , So here I choose to enable all eight channels .

6. Clock configuration of the board

For the clock configuration of the board, please refer to my previous article Blog

7. Can make RF_Analyzer

About the configuration of output current here , It is said in a document , This output capability setting is actually similar to BANK Related to the power supply . We need to look for this later
#TODO

8. When asked if generateIPCOre When , We choose no .

9. go back to Source View , Right click IP Block choice Generate Example Project

10. Generate bitstream

NEXT

After generating the bitstream, it can be downloaded to the development board , After connecting the development board . Use Rf Analyzer Some debugging work has been done .