How to turn on or off the disk LED of EMC Vmax

In the face of EMC Of Symmetrix DMX perhaps VMAX When maintaining the storage system , You often need to query the specific location of a disk in the system cabinet or disk cabinet ？ Or you need to query a faulty disk PN Number, etc. .

Symmetrix The storage system identifies the location of a disk according to director,chain and slot Rules to identify , If the VMAX perhaps DMX Not familiar with the configuration of , Basically confused , I don't know where this plate is ？ I don't know what this plate is ？

for instance , stay VMAX Of bad FRU There is a prompt for the faulty disk , As shown in the figure below ：

The position of the first plate is 01B:1:C

The location of the second disk is 02C:1:18

Next, we use a relatively simple method to determine the location of these two disks and PN, No need. VMAX Familiar with the architecture of .

Get into symmwin Management system , choice   Configuration Tools Re selection   Physical View.

A storage physical diagram will appear , Select the disk you are looking for , And then choose Tasks->Toggle Disk LED. In this way, the disk can be turned on or off LED Indicator light . When lit LED in the future , You can easily find this disk and its on the physical cabinet PN Number .

Here is a concrete example , It can be operated by comparison .