Hospital network planning and design document based on GLBP protocol + application form + task statement + opening report + interim examination + literature review + PPT + weekly progress + network to

Catalog

be based on GLBP Protocol hospital network planning and design

Abstract

Hospital network planning and design based on GLBP protocol

Abstract

1. be based on GLBP Hospital network demand analysis of Protocol

1.1 Analysis of user needs

(1) Network application demand analysis

(2) Analyze the security requirements of the network

（3） Analyze the technical requirements

1.2 Main design objectives

(1) open

(2) practical

(3) Extensibility

(4) Progressiveness

(5) reliability

(6) Security

(7) manageability

2. Overall design of hospital network

2.1 The whole structure of hospital network

2.2 The choice of Technology

2.2.1 Technology selection scheme of access layer

2.2.2 Technology options for the convergence layer

2.2.3 Technology options for the core layer

2.2.4 Network security technology options

2.3 Equipment selection

2.3.1 Cisco SW2960 Introduce

2.3.2 Cisco SW3560 Introduce

2.3.3 Cisco's Router A general introduction to

3. Hospital network generic cabling

3.1 Number of information points

3.2 Layout of equipment room

3.3 Quantity of consumables

4. Configuration and implementation of hospital network

4.1 Divide VLAN

4.2 To configure trunk

4.3 To configure RSTP

4.4 To configure SVI

4.5 To configure GLBP

4.6 To configure OSPF agreement

4.7 To configure OSPF The default route for sending

4.8 To configure NAT

4.9 Configure exit backup default routing technology

4.91 Configure server

5 Network test and acceptance of Hospital

5.1 Test and accept network effect parameters

5.2 Testing phase

5.2.1 Test the outpatient building and visit the medical technology building

5.2.2 Test the outpatient building of the hospital and visit the emergency building

5.2.3 Test hospital medical technology building visit laboratory building

5.2.4 Test the administrative building of the hospital and visit the medical technology building

5.2.5 Test the access of the hospital medical technology building to the network server

5.2.6 Test the access server of the hospital outpatient building

5.2.7 Test the access server of the hospital building

5.2.8 Test the access server of the hospital office building

5.2.9 Test the access of the medical technology building to the public network

5.2.10 Test the emergency building to access the public network

5.2.11 Test the public network access of the inpatient building

5.2.12 Test the administrative building to access the public network

5.3 Acceptance stage

6. Conclusion

7 reference

8. Cause thank

be based on GLBP Protocol hospital network planning and design

Abstract

With the rapid development of economy and the continuous development of hospital network scale , The population of hospital network services has changed a lot , The business scope is no longer just a region or a certain kind , Most of them are developing towards different models in multiple regions . Traditional hospital networks have data interaction delays 、 The security access level is not high 、 Real time communication check and many other problems , These problems directly affect the future development and operation of the hospital . With the development of science and technology and the promotion of application , Especially the development of computer technology and network technology , In addition, the application demand of hospital network is expanding , The traditional network structure and mode can no longer meet the existing requirements .

This paper is based on GLBP The protocol plans and designs the modern hospital network , Through the topology design of the whole hospital network ,IP Address planning 、 Configuration of switches and routers 、 Between departments VLAN Division 、 Gateway redundancy and Ethernet channel configuration 、NAT Conversion of private network address and public network address 、 Network security and frame relay configuration build the hardware platform of the network system . Based on the built network hardware platform , Through to DNS、DHCP Wait for service configuration , And the control and management of users in the domain environment , Application of group policy , Network printer , Software release , Disk file management , Configuration of security policy ,WEB The server 、FTP The server 、MAIL Server configuration and other functions , It realizes the overall planning and design of the network .

key word ： Load balancing , Gateway redundancy , Link aggregation , Frame relay , Double outlet

Hospital network planning and design based on GLBP protocol

Abstract

With the rapid development of economy and the continuous development of the scale of hospital network, the population of hospital network service has changed a lot, and the business scope is no longer just a region or a certain kind, the medical service of the hospital network to serve the people is no longer limited to a certain region, nor to a certain kind, but to a multi-regional and diverse mode of development. Traditional hospital network has many problems, such as delay of data interaction, low level of security access, real-time communication check and so on.

These problems have a direct impact on the development and operation of the hospital. However, with the development and popularization of modern network technology, especially the development of modern computer technology and Internet technology, the application market demand of large-scale hospital network continues to expand. The traditional network structure and mode of the hospital can no longer meet the needs of the current business.

In this paper, the GLBP protocol is used to plan and design the modern hospital network. Through the topological structure design of the whole hospital network, the IP address is planned, the configuration of switches and routers, the division of VLAN between departments, the redundancy of gateway and the configuration of Ethernet channel, the conversion of NAT private network address and network address, the configuration of network security and frame relay, the hardware platform of the network system is built. On the basis of the network hardware platform, through the configuration of DNS, DHCP and other services, as well as the control and management of users in the domain environment, the application of group strategy, network printer, software release, disk file management, security policy configuration, WEB server, FTP server, MAIL server configuration and other functions, the overall planning and design of the network is realized.

Key word:：Load Balancing Gateway Redundant Link Aggregated Frame Relay Dual-Exit

Reprinted from ：http://www.biyezuopin.vip/onews.asp?id=14328